2N7002E-T1-E3中文资料_PDF数据手册

加入BOM

Vishay

Small Signal Field-Effect Transistor, 0.24A I(D), 60V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236AB, ROHS COMPLIANT, TO-236, 3 PIN

技术详情

价格 & 库存

详细参数

符合

Not Recommended

compliant

6 weeks

4907

6.03

60 V

0.24 A

3 Ω

TO-236AB

R-PDSO-G3

ENHANCEMENT MODE

150 °C

PLASTIC/EPOXY

RECTANGULAR

SMALL OUTLINE

260

N-CHANNEL

0.35 W

Not Qualified

YES

Matte Tin (Sn)

GULL WING

DUAL

SWITCHING

SILICON

文档下载

2N7002E-T1-E3 Vishay Siliconix 也适用于 2N7002-E3 ,2N7002E-T1 ,2N7002E-E3 等其余

参考设计

(5)

Non-Isolated Push-Pull Converter Design

PMP7887: This is a non-isolated forward push-pull converter design accepting 20V-to-50V input voltage and regulating the output to 36Vout @ 6A.

Power Solution for an Automotive Voltage Quality Module

PMP7916: The PMP7916 is a boost converter that can be used by a voltage quality module in a start-stop car to condition the battery voltage seen by electronic loads. For such a car to utilize existing electronic assemblies, input voltage to the assemblies is not allowed to dip to 6V during warm cranking or else they will momentarily shut down. The PMP7916 keeps the input voltage above 10.5V during cranking, and bypasses the battery voltage when it goes above 12V. When boosting a low battery voltage during cranking, the PMP7916 can support a 500W load for 5 seconds.

3 LED Driver

PMP7866: This is an LED driver/converter that can power up to three high output LEDs. It has an input voltage range of 9V-to-16Vin and an output of 10.5Vout @ 1A.

High-Efficiency 4 Phase Synchronous Boost Conv for Automotive Trunk Amplifier App Reference Design

PMP7969: PMP7969 is a very high efficiency 4 phase boost controller synchronizable to external clock. Light load efficiency is excellent due to phase shedding capability. Synchronous rectifier also improves efficiency. High effective switching frequency obtained with multiphase over single phase, and current sharing accuracy of ±10%. Bypass mode capable when Vin > Vout.

Automotive Audio I2S over Coax Class D Amplifier Reference Design

TIDA-00223: This reference design is an I²S/TDM-based, low-cost, easy-to-use alternative to fiber optics/analog copper wire for connecting an automotive (sound) control panel to an output stage/power amplifier. Supporting I²S as well as TDM, it is capable of transmitting digital audio signal to 16 independent channels of speakers with each channel output of 80W at 4Ω. It also supports bidirectional communication with the control unit or processor via I²C, over a single shielded twisted pair (STP) or coaxial. Furthermore, the TIDA-00223 reference design enables fast implementation with power supply included, and it has all the protection and diagnostics requirements needed in modern cars.

< / 共 5 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

2N7002E-T1-E3

详细参数

文档下载

参考设计

市场价格分析

价格走势

库存走势

分销商库存

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

2N7002E-T1-E3

详细参数

文档下载

参考设计

市场价格分析

价格走势

库存走势

分销商库存

完善邮箱信息

站内导航

友情链接

联系我们

美国总部

苏州总部