参考设计
(91)
21V to 26V @ 4A LED Driver
PMP5715.2: The PMP5715.2 is the second block, an LLC resonant isolated stage, which takes the 410V from the PFC stage and delivers 26V @ 4A constant current, suitable for LED panel driving. The loop is closed by means of a current transformer, connected to the output windings. An open string protection is accomplished by and optocoupler and a zener diode.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.2: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
Universal AC Input 150W Single String 200V/700mA Output LLC Converter without CT
PMP4350: The reference design is a high effiency (>94%) isolated AC/DC single string output LED lighting solution for high watt (>100W) general LED lighting. The topology uses Transition Mode (TM) PFC plus LLC control, which can support PWM dimming and analog dimming on the output side. The target application for this reference design is TV LED backlight, outdoor and high-bay general LED lighting. CT is eliminated in the design and the PSR controller UCC28700 is used for aux power in order to reduce overall cost.
AC Input, 6 Channel LED Strings with 30W Output Reference Design - PMP4484.8 - TI Tool Folder
PMP4484: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
21V to 26V @ 4A LED Driver
PMP5715.1: The PMP5715.1 is a transition mode (TM) Boost PFC that, from high line (176Vac to 280Vac), supplies 410V @ 283mA to the second block: the LLC stage.
PMP4518 BALLAST 50V@1.4A | TI.com
PMP4518: The PMP4518 is an isolated single-stage PFC flyback. The voltage loop is closed to the secondary side and supplies a constant 50V @ 1.4A bus voltage for LED applications. The input voltage is 108V…305Vac
PMP4625 70W PFC LED Bus Voltage Generator | TI.com
PMP4625: The PMP4625 is an isolated single-stage PFC flyback. The voltage loop is closed to the secondary side and supplies a constant 50V @ 1.4A bus voltage for LED applications. The input voltage is 180Vac to 265Vac
100VAC-265VAC 100W High Bay LED Lighting (80V @ 350mA)
PMP4862.2: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
AC Input, 6 Channel LED Strings with 30W Output Reference Design - PMP4484.6 - TI Tool Folder
PMP4484: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
PFC Flyback LED Converter 40V - 120V @ 0.35A
PMP4522: This active power factor correction, transition mode, isolated flyback generates a constant current of 350mA on an LED string from high line (180 to 264Vac). The output accepts a voltage range of 40 to 120V. Open LED protection (overvoltage) and safety discharge of output capacitors are implemented as well.
PMP4484 AC Input, 6 Channel LED Strings with 30W Output Reference Design | TI.com
PMP4484: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
24V@2A, 5V@0.6A PFC Flyback
PMP5688.2: This Buck converter accepts the 24V input from PMP5688.1 and supplies the digital part of the load in LED digital architectures.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.6: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
PMP5112 95VAC-305VAC Input, 50W SEPIC-PFC LED Driver | TI.com
PMP5112: The PMP5112 reference design uses the UCC28810 in a single-stage, PFC-SEPIC configuration to drive a 50W LED load. This supply can operate from an input ranging from 85VAC up to 305VAC. It is capable of driving LED strings from 50V up to 100V at a fixed current of 0.5A with efficiency over 90%.
PMP4862 100VAC-265VAC 100W High Bay LED Lighting (80V @ 350mA) | TI.com
PMP4862: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
Flyback 12V@5A
PMP4705: The PMP4705 is a reference design for a 12V Bus Voltage. It can operate from a wide input voltage range (100VAC to 240VAC). It’s a flyback topology with a pfc.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.8: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
PMP4618 33.6W PFC LED Drive | TI.com
PMP4618: The PMP4618 is a constant current LED driver, delivering 10V to 48V with a constant current of 350mA or 700mA. The output current is adjustable by means of a switch; the input voltage is the high line.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.4: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
PMP4484 AC Input, 6 Channel LED Strings with 30W Output Reference Design | TI.com
PMP4484: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
PMP4350 Universal AC Input 150W Single String 200V/700mA Output LLC Converter without CT | TI.com
PMP4350: The reference design is a high effiency (>94%) isolated AC/DC single string output LED lighting solution for high watt (>100W) general LED lighting. The topology uses Transition Mode (TM) PFC plus LLC control, which can support PWM dimming and analog dimming on the output side. The target application for this reference design is TV LED backlight, outdoor and high-bay general LED lighting. CT is eliminated in the design and the PSR controller UCC28700 is used for aux power in order to reduce overall cost.
BALLAST 50V@1.4A
PMP4518: The PMP4518 is an isolated single-stage PFC flyback. The voltage loop is closed to the secondary side and supplies a constant 50V @ 1.4A bus voltage for LED applications. The input voltage is 108V…305Vac
PMP5687 150W 51.5V Bus Voltage Generator | TI.com
PMP5687: A transition mode (TM) Boost PFC and a TM Buck deliver from high line a clean 80mA current to a LED string, max. voltage 312V. The PCB board has been developed to fit into a T8 fluorescent tube, suitable for retrofit purpose. A PWM dimming input is also included.
Universal Input, 21V…26V @ 4A LED Driver
PMP5739: The PMP5739 is a the universal line version of PMP5715. By means of a PFC TM Boost and a LLC stage delivers 21V...26V @ 4A constant current, suitable for LED panel driving. The loop is closed by means of a current transformer, connected to the output windings. An open string protection is accomplished by and optocoupler and a zener diode
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.1: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
Multi-Transformer 2x25V (50V@700mA)
PMP5660.2: From universal input to two strings LED @ 700mA, 50V maximum per string, this PMP5660 offers high efficiency even with a two stage solution: PFC TM Boost and multi-transformer LLC resonant. A TLC555 provides a internal PWM dimming function.
380V/350mA Dimmable LED Driver using Single String LLC Solution without Dimming FET
PMP4371: This design is based on PMP4350 and supports higher output voltage up to 380V. Different from PMP4350, the high voltage LED switch MOSFET is removed and reduced overall cost. With additional resistor and capacitor from LEDSW to CS pin, the LED driver demos good linearity dimming performnace under analog and PWM dimming mode. High effiency (>94%), high PF(>0.94) isolated AC/DC single string output LED lighting solution for high watt (>100W) general LED lighting. The topology uses Transition Mode (TM) PFC plus LLC control and achieves high efficiency (>94%) and high PF(>0.94). The target application for this reference design is TV LED backlight, outdoor and high-bay general LED lighting.
AC-mains LED Lighting with DALI DMX512 & Power Line Communications Reference Design
TIDM-AC-LED-COM: Ideal for outdoor, entertainment, and industrial lighting applications, this LED Lighting design provides high power and high efficiency illumination with built-in communications networking. The lighting unit consists of a 250W universal AC-input LED driver power supply and a demonstrational six-string LED lamp. Driving the LED’s with great power efficiency and electrical utilization, the LED driver power supply operates at greater than 90% power efficiency with 0.99 power factor (PF). Furthermore, to support system-networked lighting and remote connectivity, this power supply includes support for common lighting communications standards including Digital Addressable Lighting Interface (DALI), DMX512, and Power Line Communications (PLC).
18W AC-DC Indoor LED Driver
PMP6694: The PMP6694 is 18W LED based reference design for replacing incandescent and halogen bulbs utilizing UCC28810 quasi resonant PFC flyback converter.
95VAC-305VAC Input, 50W SEPIC-PFC LED Driver
PMP5112: The PMP5112 reference design uses the UCC28810 in a single-stage, PFC-SEPIC configuration to drive a 50W LED load. This supply can operate from an input ranging from 85VAC up to 305VAC. It is capable of driving LED strings from 50V up to 100V at a fixed current of 0.5A with efficiency over 90%.
90 to 264Vac In 100W 4x500mA LED Lighting Driver W/O Aux Flyback Power Supply f/Vcc Reference Design
PMP4302B: This reference design uses TI multi-transformer LLC controller UCC25710 and transition mode PFC controller UCC28810 to develop a 100W four strings with 500mA per string output for general LED lighting driver. The key benefits for this solution are high efficiency, high power factor and good current matching. Meanwhile, the reference design uses innovative self start up circuit to supply Vcc on the primary side (UCC28810) and secondary side (UCC25710), and it does not use any auxilary Flyback to power main controllers. The application can be used in general LED lighting such as street light and commercial light.
PMP5660 Multi-Transformer 2x25V (50V@700mA) | TI.com
PMP5660: From universal input to two strings LED @ 700mA, 50V maximum per string, this PMP5660 offers high efficiency even with a two stage solution: PFC TM Boost and multi-transformer LLC resonant. A TLC555 provides a internal PWM dimming function.
PMP4862 100VAC-265VAC 100W High Bay LED Lighting (80V @ 350mA) | TI.com
PMP4862: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
PMP3976 150VAC-264VAC Input, 100W SEPIC-PFC LED | TI.com
PMP3976: The PMP3976 reference design uses the UCC28810 in a single-stage, PFC-SEPIC configuration to drive a 100W LED load. This supply can operate from an input ranging from 150VAC up to 264VAC. It is capable of driving LED strings from 250V up to 300V at a fixed current of 0.35A with efficiency over 90%.
35W PFC LED Drive
PMP5526: LED flyback for High Line input, offline LED driver that provides Power factor Correction PFC
PMP4501 LED driver 48V@0.7A | TI.com
PMP4501: The PMP4501 is a constant current LED driver, delivering 10V to 48V with a constant current of 700mA. The output current is adjustable with a single resistor; the input voltage is the high line.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.3: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.7: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
100VAC-265VAC 100W High Bay LED Lighting (80V @ 350mA)
PMP4862.4: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
Universal Input 45W AC-DC LED Driver Reference Design
PMP6011: This design provides the ability to drive multiple LED strings with current matching from an AC source from 90VAC to 300VAC. The circuit is power factor corrected and provides high efficiency and good line regulation.
33.6W PFC LED Drive
PMP4618: The PMP4618 is a constant current LED driver, delivering 10V to 48V with a constant current of 350mA or 700mA. The output current is adjustable by means of a switch; the input voltage is the high line.
110W AC input 6-channel dimmable LED driver with DHC feature
PMP4334: PMP4334 is the combo solution that provides single stage PFC and 6-channel LED drivers total solution with 110W output power. It delievers 350mA/channel with typical 50V output voltage. Overall PF>0.95 is achieved with the help of TM PFC UCC28810. Dynamic headroom control(DHC) feature of LM3463 controls DC input from UCC28810 and achieves high efficiency > 90% over wide range. It also presents good dimming linearity and accuracy. PMP4334 provides the dimming interface which can also support wireless dimming mode.
100VAC-265VAC 100W High Bay LED Lighting (100V @ 1.2A)
PMP4862.1: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
PMP4715 28V @ 1.4A PFC Flyback | TI.com
PMP4715: The PMP4715 is a constant current LED driver, including the PFC function, delivering 12V to 28V with a constant current of 1.4A. The input voltage is the high line.
50W PFC LED Drive Transition Mode Flyback
PMP2698: This active power factor correction, transition mode, isolated flyback generates a constant current of 3.5A on an LED string from high line (180 to 264Vac). The output accepts a voltage range of 8 to 28V. The open LED protection (overvoltage) is set to 27V maximum.
150W 51.5V Bus Voltage Generator
PMP5687: A transition mode (TM) Boost PFC and a TM Buck deliver from high line a clean 80mA current to a LED string, max. voltage 312V. The PCB board has been developed to fit into a T8 fluorescent tube, suitable for retrofit purpose. A PWM dimming input is also included.
Multi-Transformer 2x25V (390V@192mA)
PMP5660.1: From universal input to two strings LED @ 700mA, 50V maximum per string, this PMP5660 offers high efficiency even with a two stage solution: PFC TM Boost and multi-transformer LLC resonant. A TLC555 provides a internal PWM dimming function.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.5: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
150VAC-264VAC Input, 100W SEPIC-PFC LED
PMP3976: The PMP3976 reference design uses the UCC28810 in a single-stage, PFC-SEPIC configuration to drive a 100W LED load. This supply can operate from an input ranging from 150VAC up to 264VAC. It is capable of driving LED strings from 250V up to 300V at a fixed current of 0.35A with efficiency over 90%.
25V @ 2A PFC Flyback
PMP5560: The PMP5560 is a constant current LED driver, including the PFC function, delivering 12V to 25V with a constant current of 2A. The input voltage is the high line.
PMP4302B 90 to 264Vac In 100W 4x500mA LED Lighting Driver W/O Aux Flyback Power Supply f/Vcc Reference Design | TI.com
PMP4302B: This reference design uses TI multi-transformer LLC controller UCC25710 and transition mode PFC controller UCC28810 to develop a 100W four strings with 500mA per string output for general LED lighting driver. The key benefits for this solution are high efficiency, high power factor and good current matching. Meanwhile, the reference design uses innovative self start up circuit to supply Vcc on the primary side (UCC28810) and secondary side (UCC25710), and it does not use any auxilary Flyback to power main controllers. The application can be used in general LED lighting such as street light and commercial light.
24V@2A, 5V@0.6A PFC Flyback
PMP5688.1: From universal mains to 24V @ 2A constant voltage, this converter, that includes the PFC function, found typical application in LED bus voltage generation. A further Buck provides 5V @ 600mA for the digital part of the load.
LED Driver for Area Light
PMP5732: The PMP5732 is a LED driver for area light. It can operate from an input voltage range (100VAC to 277VAC). It's a flyback topology with analog dimming.
PFC SEPIC (208V@0.110A Non-isolated LED String) for OLED Lighting
PMP5242: The PMP5242 reference design uses the UCC28810 in a single-stage, PFC-SEPIC configuration to drive a 22W LED load. This supply can operate from an input ranging from 85VAC up to 265VAC. It is capable of driving LED strings from 156V up to 208V at a fixed current of 110mA with efficiency over 89%.
PMP4705 Flyback 12V@5A | TI.com
PMP4705: The PMP4705 is a reference design for a 12V Bus Voltage. It can operate from a wide input voltage range (100VAC to 240VAC). It’s a flyback topology with a pfc.
LED driver 48V@0.7A
PMP4501: The PMP4501 is a constant current LED driver, delivering 10V to 48V with a constant current of 700mA. The output current is adjustable with a single resistor; the input voltage is the high line.
Universal AC input(90V-264V) high efficiency 150W single string 200V/700mA output LLC converter
PMP4317: The reference design is a very high effiency (>94%) isolated AC/DC single string output LED lighting solution for high watt (>100W) general LED lighting. The topology uses Transition Mode (TM) PFC plus LLC control, which can support PWM dimming and analog dimming on the output side. The target application for this reference design is outdoor and high-bay general LED lighting
PMP4636 PFC/Flyback for LED Lighting - 59V@2.5A | TI.com
PMP4636: PMP4636 is an active power factor correction, transition mode, isolated flyback that generates a bus voltage of 59V@2.5A starting from high line. This voltage will supply several buck converters needed to provide constant current to different LED strings.
100VAC-265VAC 100W High Bay LED Lighting (80V @ 350mA)
PMP4862.3: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
PMP5688 24V@2A, 5V@0.6A PFC Flyback | TI.com
PMP5688: From universal mains to 24V @ 2A constant voltage, this converter, that includes the PFC function, found typical application in LED bus voltage generation. A further Buck provides 5V @ 600mA for the digital part of the load.
Universal Input to 40V@700mA Sepic
PMP5714: This PMP5714 is a non-isolated constant current LED driver that, from universal mains, delivers 20V…40V @ 700mA in a SEPIC topology, achieving high power factor in a small space.
PMP5660 Multi-Transformer 2x25V (50V@700mA) | TI.com
PMP5660: From universal input to two strings LED @ 700mA, 50V maximum per string, this PMP5660 offers high efficiency even with a two stage solution: PFC TM Boost and multi-transformer LLC resonant. A TLC555 provides a internal PWM dimming function.
PFC/Flyback for LED Lighting - 59V@2.5A
PMP4636: PMP4636 is an active power factor correction, transition mode, isolated flyback that generates a bus voltage of 59V@2.5A starting from high line. This voltage will supply several buck converters needed to provide constant current to different LED strings.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.9: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
70W PFC LED Bus Voltage Generator
PMP4625: The PMP4625 is an isolated single-stage PFC flyback. The voltage loop is closed to the secondary side and supplies a constant 50V @ 1.4A bus voltage for LED applications. The input voltage is 180Vac to 265Vac
TIDM-AC-LED-COM AC-mains LED Lighting with DALI DMX512 & Power Line Communications Reference Design | TI.com
TIDM-AC-LED-COM: Ideal for outdoor, entertainment, and industrial lighting applications, this LED Lighting design provides high power and high efficiency illumination with built-in communications networking. The lighting unit consists of a 250W universal AC-input LED driver power supply and a demonstrational six-string LED lamp. Driving the LED’s with great power efficiency and electrical utilization, the LED driver power supply operates at greater than 90% power efficiency with 0.99 power factor (PF). Furthermore, to support system-networked lighting and remote connectivity, this power supply includes support for common lighting communications standards including Digital Addressable Lighting Interface (DALI), DMX512, and Power Line Communications (PLC).
LED driver 80V@2A
PMP4530: From the low mains (85Vac…132Vac) the PMP4530 supplies 80V @ 2A constant voltage with a PFC Flyback single stage topology. The output is usually connected to several Buck post regulators to LED strings.
PMP5739 Universal Input, 21V…26V @ 4A LED Driver | TI.com
PMP5739: The PMP5739 is a the universal line version of PMP5715. By means of a PFC TM Boost and a LLC stage delivers 21V...26V @ 4A constant current, suitable for LED panel driving. The loop is closed by means of a current transformer, connected to the output windings. An open string protection is accomplished by and optocoupler and a zener diode
PMP4371 380V/350mA Dimmable LED Driver using Single String LLC Solution without Dimming FET | TI.com
PMP4371: This design is based on PMP4350 and supports higher output voltage up to 380V. Different from PMP4350, the high voltage LED switch MOSFET is removed and reduced overall cost. With additional resistor and capacitor from LEDSW to CS pin, the LED driver demos good linearity dimming performnace under analog and PWM dimming mode. High effiency (>94%), high PF(>0.94) isolated AC/DC single string output LED lighting solution for high watt (>100W) general LED lighting. The topology uses Transition Mode (TM) PFC plus LLC control and achieves high efficiency (>94%) and high PF(>0.94). The target application for this reference design is TV LED backlight, outdoor and high-bay general LED lighting.
PMP4334 110W AC input 6-channel dimmable LED driver with DHC feature | TI.com
PMP4334: PMP4334 is the combo solution that provides single stage PFC and 6-channel LED drivers total solution with 110W output power. It delievers 350mA/channel with typical 50V output voltage. Overall PF>0.95 is achieved with the help of TM PFC UCC28810. Dynamic headroom control(DHC) feature of LM3463 controls DC input from UCC28810 and achieves high efficiency > 90% over wide range. It also presents good dimming linearity and accuracy. PMP4334 provides the dimming interface which can also support wireless dimming mode.
PMP4522 PFC Flyback LED Converter 40V - 120V @ 0.35A | TI.com
PMP4522: This active power factor correction, transition mode, isolated flyback generates a constant current of 350mA on an LED string from high line (180 to 264Vac). The output accepts a voltage range of 40 to 120V. Open LED protection (overvoltage) and safety discharge of output capacitors are implemented as well.
PMP4530 LED driver 80V@2A | TI.com
PMP4530: From the low mains (85Vac…132Vac) the PMP4530 supplies 80V @ 2A constant voltage with a PFC Flyback single stage topology. The output is usually connected to several Buck post regulators to LED strings.
28V @ 1.4A PFC Flyback
PMP4715: The PMP4715 is a constant current LED driver, including the PFC function, delivering 12V to 28V with a constant current of 1.4A. The input voltage is the high line.
PMP5688 24V@2A, 5V@0.6A PFC Flyback | TI.com
PMP5688: From universal mains to 24V @ 2A constant voltage, this converter, that includes the PFC function, found typical application in LED bus voltage generation. A further Buck provides 5V @ 600mA for the digital part of the load.
PMP5560 25V @ 2A PFC Flyback | TI.com
PMP5560: The PMP5560 is a constant current LED driver, including the PFC function, delivering 12V to 25V with a constant current of 2A. The input voltage is the high line.
PMP2698 50W PFC LED Drive Transition Mode Flyback | TI.com
PMP2698: This active power factor correction, transition mode, isolated flyback generates a constant current of 3.5A on an LED string from high line (180 to 264Vac). The output accepts a voltage range of 8 to 28V. The open LED protection (overvoltage) is set to 27V maximum.
