BAS20LT1G中文资料_PDF数据手册

BAS20LT1G

加入BOM

ON Semiconductor

200 V Switching Diode, SOT-23 (TO-236) 3 LEAD, 3000-REEL

技术详情

价格 & 库存

详细参数

Source Content uid

BAS20LT1G

Brand Name

onsemi

不含铅

Active

SOT-23 (TO-236) 3 LEAD

318-08

compliant

EAR99

8541.10.00.70

4 weeks

2921

1.27

SINGLE

SILICON

RECTIFIER DIODE

1 V

TO-236AB

R-PDSO-G3

0.625 A

150 °C

-55 °C

0.07 A

PLASTIC/EPOXY

RECTANGULAR

SMALL OUTLINE

260

0.225 W

Not Qualified

70 V

0.05 µs

YES

SCHOTTKY

GULL WING

DUAL

文档下载

BAS20LT1G ON Semiconductor 也适用于 SBAS21DW5T1G ,BAS19LT3G ,BAS20LT1 等其余

参考设计

(6)

120 VAC 7W PFC Wall Dimmable AC Linear Floating Switch LED Driver Reference Design

PMP6022: This magnetic-free (no transformer/inductor), small form-factor, LED driver circuit is ideal for use in LED lamps, downlights, and fixtures. The design takes advantage of relatively new high forward-voltage (22V), low-current (20mA) white LEDs to realize a compact design producing >800 lumens from about 9W of input power. The novel floating switch architecture produces low LED current ripple comparable to single-stage SMPS based designs while providing excellent compatability with a wide range of common household wall dimmers.

9Vdc-57Vdc Input, 56V/20W Isolated Flyback

PMP6963: This reference design uses the TPS40210 current mode controller to generate an isolated 56V/0.35A output from a wide 9V - 57V DC input. This design uses diode rectification on the output stage and achieves efficiencies up to 89% at full load with peaks over 90%.

120VAC Input,3.5W Output LED Driver Candelabra (E12) & Small Form Factor LED Lig Reference Design

PMP6025: PMP6025 is a simple, magnetic-free, AC linear LED light engine design utilizing TPS92411 floating switches to deliver approximately 400 lumens when supplied with 120V mains AC. The form factor has been optimized to fit standard E12 Candelabra Edison Screw (CES) light bulb bases. EMI, Power factor and THD performance easily exceed all regulatory requirements.

220VAC in 28W Non-Isolated T8 Tube LED Driver Solution

PMP4362: The reference design presents non-isolated LED driver solution for 28W T8 tube application. The valley switching mode controller TPS92314 is used to achieve high effiency (>93%) over input range. Inherent PFC achieves high PF>0.92. The design includes EMI driver board and LED driver board. The overall size is around 100mmx16mmx14.5mm.

20W AC/DC PSR isolated LED Driver for T8

PMP4330: This reference design demonstrates low cost, high PF LED Driver solution for T8, which includes single stage Flyback with Primary Side Regulation topology using TPS92310. The input range is 85~265Vac and output is 38~42V 420mA or 26~42V 420mA

Universal AC input High Efficiency 18W isolated LED driver for T8 Tube. (42V @ 0.42A)

PMP4347: This reference design demonstrates low cost, high PF LED Driver solution for T8 tube application, which includes single stage Flyback with Primary Side Regulation topology using TPS92314(SOIC-8). The input range is 85~265Vac and output is 38~42V 420mA. Typical 90% efficiency and PF>0.9.

< / 共 6 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

BAS20LT1G

详细参数

文档下载

参考设计

市场价格分析

价格走势

库存走势

分销商库存

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

BAS20LT1G

详细参数

文档下载

参考设计

市场价格分析

价格走势

库存走势

分销商库存

站内导航

友情链接

联系我们

美国总部

苏州总部