无法从文档中提取型号,请重试

Update your browser

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience for this site.

首页 > 电子元器件选型 > 电源电路 > 电源管理电路

INA226AIDGSR

加入BOM

INA226AIDGSR
已加入BOM:

36V, 16-bit, ultra-precise i2c output current/voltage/power monitor w/alert 10-VSSOP -40 to 125

市场均价:
¥4.8714
市场总库存:
70,117
生命周期状态: Active
技术详情
价格 & 库存
替代料

参考设计

(4)
TIDA-00313 -48V Telecom Current/Voltage/Power Sense with Isolation | TI.com
TIDA-00313: This verified design can accurately measure current, voltage and power on a bus that carries -48V and is able to provide this data using an I²C compatible interface. This design is targeted for Telecom applications because the most common Telecom equipment’s are fed with this negative supply voltage. It uses INA226 and ISO1541. The INA226 is a current shunt and power monitor with an I²C compatible interface. This device will precisely take these measurements and will use ISO1541 to translate the negative voltage to ground referenced signals. The ISO1541 is a low-power, bidirectional I²C compatible isolator.
-48V Telecom Current/Voltage/Power Sense with Isolation
TIDA-00313: This verified design can accurately measure current, voltage and power on a bus that carries -48V and is able to provide this data using an I²C compatible interface. This design is targeted for Telecom applications because the most common Telecom equipment’s are fed with this negative supply voltage. It uses INA226 and ISO1541. The INA226 is a current shunt and power monitor with an I²C compatible interface. This device will precisely take these measurements and will use ISO1541 to translate the negative voltage to ground referenced signals. The ISO1541 is a low-power, bidirectional I²C compatible isolator.
TIDA-00528 40 V to 400 V Uni-directional Current/Voltage/Power Monitoring Reference Design | TI.com
TIDA-00528: This verified design can accurately measure current, voltage and power on a bus as high as 400 V using an I2C- or SMBUS-compatible interface. This design is targeted towards industrial applications where there is a need to measure system current accurately with bus voltages greater than 40 Volts such as Solar inverters, HEV/EV systems and Source generation for AC/DC electronic loads and power sources. This is a low cost non-isolated solution for high voltage current monitoring. It uses INA226 and OPA333 along with a 600-V P-FET transistor.
TIDA-00639 600V Uni-directional Current/Voltage/Power Monitoring for Solar Smart Combiner Box Reference Design | TI.com
TIDA-00639: The TIDA-00639 reference design is a non-isolated high-side current and voltage sensing design for a smart combiner box in a grounded or ungrounded system. The non-isolated current sensing topology enables accurate power monitoring for high voltage systems. This design is optimized for any voltage between 95 V and 600 V, and with minor component changes this sensing topology can be optimized for any voltage from 40 to 1000V.
显示更多价格 & 库存吗?

价格走势

库存走势

显示更多替代料吗?
新建BOM