参考设计
(28)
Dual Rail (+/-) Ultra-Low Noise High PSRR, LDOs (-15V @ 200mA) Reference Design
PMP5863.4: The negative-voltage TPS7A3001 LDO, when paired with the positivevoltage TPS7A4901 LDO, provides designers with a total solution for powering precision analog applications. These LDOs feature ultra-high PSRR performance with output noise as low as 16 µVrms and are designed to power noise-sensitive applications such as op amps, ADCs, DACs and other high-performance analog circuitry.
Dual Rail (+/-) Ultra-Low Noise High PSRR LDOs (-16V @ 300mA) Reference Design
PMP5863.2: The negative-voltage TPS7A3001 LDO, when paired with the positivevoltage TPS7A4901 LDO, provides designers with a total solution for powering precision analog applications. These LDOs feature ultra-high PSRR performance with output noise as low as 16 µVrms and are designed to power noise-sensitive applications such as op amps, ADCs, DACs and other high-performance analog circuitry.
Universal Digital Interface to Absolute Position Encoders Reference Design
TIDA-00179: The TIDA-00179 reference design is an EMC compliant universal digital interface to connect to absolute position encoders, like EnDat 2.2, BiSS®, SSI or HIPERFACE DSL®. The design supports a wide input voltage range from 15-60V (24V nom). A connector with 3.3V logic I/O signals allows for direct interface to the host processor to run the master protocol. The design allows the host processor to select between a 4-wire encoder interface like EnDat 2.2 and BiSS or a 2-wire interface with power over RS485 like HIPERFACE DSL. To meet the selected encoder's supply range, the design offers a programmable output voltage with either 5.25V or 11V. This design’s power supply offers protection against over-voltage and short circuit according to the selected encoder’s voltage range to prevent damage during a cable short. TIDA-00179 has been tested up to 100m cable length with EnDat 2.2 and 2-wire HIPERFACE DSL encoders.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.25V @ 10mA)
PMP5922.9: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.5V @ 350mA) - PMP5922.7 - TI Tool Folder
PMP5922: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.05V @ 3.4A)
PMP5922.5: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Sync Buck for Intel Atom E6xx Tunnel Creek (2.5V @ 50mA)
PMP5922.6: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.1V @ 3.5A)
PMP5922.1: TI's Highest Power Density Low Input Voltage Complete Intel Atom E6xx (Tunnel Creek) power system designs; in 967mm2 this design has all the voltage regulators needed to power Intel's Atom E6xx CPU platform and fit onto a 70x70 or smaller COM Express Module used in Industrial Automation and Process Control applications.
High Power Density 12Vin, 11.8W Buck Converter with Inductor On Top of the IC
TIDA-00595: The TPS53515 Inductor-On-Top Step-Down Buck Converter reference design enables reduction of X-Y area while enabling >87% efficiency with 2.6W of power loss @12A load and 12mV of output voltage ripple with only 10x22uF ceramic output caps. This power reference design supports a 12V input and a 1.2V output at 12A and switches at 1MHz.
Dual Rail (+/-) Ultra-Low Noise High PSRR LDOs (16V @ 150mA) Reference Design
PMP5863.1: The negative-voltage TPS7A3001 LDO, when paired with the positivevoltage TPS7A4901 LDO, provides designers with a total solution for powering precision analog applications. These LDOs feature ultra-high PSRR performance with output noise as low as 16 µVrms and are designed to power noise-sensitive applications such as op amps, ADCs, DACs and other high-performance analog circuitry.
15 Cell Lithium Ion Battery Controller Analog Front End Reference Design
TIDA-00255: The TIDA00255 reference design utilizes the bq76940 analog front end (AFE) IC. It measures cell voltages, and die temperature or external thermistor voltage using a 14 bit ADC. Current is measured separately by a separate 16 bit coulomb counter. The design can turn off low side power FETs to stop discharge or charge based on selected hardware limits. A microcontroller not included in this design would be part of the battery controller to communicate to the AFE to set protection thresholds, turn on the power FETs, provide fault recovery and turn off the FETs for over or under temperature conditions. A battery controller design may contain other features which are not part of this reference design such as secondary over voltage protection, gauging, and isolated communication to let the system know the state of the battery.
Xilinx(r) Ultrascale(r) 16nm FPGA/SoC Power Solution for Mobile Radio Basestation with PMBus
PMP10555: The PMP10555 reference design provides all the power supply rails necessary to power Xilinx® Ultrascale® 16nm family of FPGAs/SoCs in a mobile radio basestation application. This design uses a PMBus compatible 20A integrated FET buck converter for the core and two multi-output buck regulator ICs to provide the remaining supplies necessary rails to power the FPGA. It also features two LM3880's for flexible power up and power down sequencing. This design uses a 12V input.
Xilinx Kintex UltraScale FPGA Power Solution Reference Design with PMBus
PMP9444: The PMP9444 reference design provides all the power supply rails necessary to power Xilinx's Kintex UltraScale family of FPGAs. It features two UCD90120A's for flexible power up and power down sequencing as well as voltage monitoring, current monitoring, and voltage margining through the PMBus interface. This design uses a 12V input.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.1V @ 1.6A)
PMP5922.2: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.8V @ 5A) - PMP5922.4 - TI Tool Folder
PMP5922: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.8V @ 5A)
PMP5922.4: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.5V @ 350mA)
PMP5922.7: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.2V @ 3A)
PMP5922.3: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
Self or Dual-Powered Supply for Protection Relay, MCCBs & ACBs Ref Design
TIDA-00229: This power supply solution for Protection Relays & MCCBs handles both the current input from a Current Transformer (CT) or input from an Auxillary (Aux) source. The "self-powered" capability comes from being able to harness the power available in the grid through the CT. The flexibility of this solution's "dual-power" input comes from the ability to also handle the Aux input - which is often a battery source.
Dual Rail (+/-) Ultra-Low Noise High PSRR LDOs (15V @ 150mA) Reference Design
PMP5863.3: The negative-voltage TPS7A3001 LDO, when paired with the positivevoltage TPS7A4901 LDO, provides designers with a total solution for powering precision analog applications. These LDOs feature ultra-high PSRR performance with output noise as low as 16 µVrms and are designed to power noise-sensitive applications such as op amps, ADCs, DACs and other high-performance analog circuitry.
Sync Buck for Intel Atom E6xx Tunnel Creek (1.05V @ 100mA)
PMP5922.8: PMP5922 is a complete 3.3V/5VIN input Intel Atom Tunnel Creek Power System. For the core voltages the TPS59610 controller with the dual CSD86330Q3D MOSFET is used. The 1.2V IOH uses the TPS53311 converter, the DDR2 memory uses the TPS51916 converter and for the 1.05V I/O the TPS53219 controller plus dual CSD86330Q3D is used. For 4 remaining low current outputs LDOs are used.
High Density 200 A (255 A Peak) 6 Phase DC-DC Buck Converter with PMBus Interface Reference Design
PMP9738: Advanced DCAP+ control is used to provide the high speed dynamic control needed for CPU, Memory and ASIC applications. Six high current synchronous power stages provide the high currents and low losses needed for these applications. Multi-phase also allows output ripple cancellation and effective higher bandwidth control for a given switching frequency. PMP9738 focuses on ease of electrical testing and ability to make changes "on the fly" thru the PMBus interface. On board bias supplies and a high speed dynamic load round out the rich test interface.
High Density 600mV 200 A 5-6 Phase DC-DC Buck Converter with PMBus Interface Reference Design
PMP10393: Advanced DCAP+ control is used to provide the high speed dynamic control needed for CPU, Memory and ASIC applications. Up to six high current synchronous power stages provide the high currents and low losses needed for these applications. Multi-phase also allows output ripple cancellation and effective higher bandwidth control for a given switching frequency. PMP10393 has same hardware as 1.0V PMP9738 but demonstrates operation at 600mV output up to 200 A off 12V input. Fixed on time mode and reduced switching frequency at 600mV help reduce losses and improve thermal balance between FETs. Testing at 120A output with 3 & 4 phases and lower cost Power Stage also included. Design focuses on ease of electrical testing and ability to make changes "on the fly" thru the PMBus interface. On board bias supplies and a high speed dynamic load round out the rich test interface.
High Density 900mV 220 A 6 Phase DC-DC Buck Converter with PMBus Interface Reference Design
PMP11208: PMP11208 has same hardware as 1.0V PMP9738 and 0.6V PMP10393 but demonstrates operation at 900mV output up to 240 A off 11V, 12V and 13V inputs. While the design is in quasi fixed frequency mode for 1.0Vout and in fixed on time mode for 600mVout, it can be in either mode at 900mVout depending upon load and actual Vin. Testing focused upon detailed static and dynamic loading in and between both modes to show a seamless transition between the two modes.
Two-Wire Interface to a HIPERFACE DSL Encoder Reference Design
TIDA-00177: The TIDA-00177 reference design is an EMC compliant industrial interface to a two-wire HIPERFACE DSL encoder. Applications include industrial servo drives. The design features a 3.3-V supply RS485 transceiver and line termination and coupling for encoder power over RS485 as per HIPERFACE DSL specification. The design has been tested up to 100m cable length with an integrated cable, where the encoder’s two-wire twisted pair was integrated in the same motor cable. The encoder connector output is protected against over-voltage and short circuit to prevent damage to an encoder or during a cable short. The design features an industrial compliant 24-V input with wide range from 18-36V. A 3.3V I/O connector with logic signals for easy interface to a host processor with HIPERFACE DSL Master IP Core is made available.
Xilinx Virtex UltraScale FPGA Power Solution with PMBus Reference Design
PMP9475: The PMP9475 12V-input reference design provides all the power supply rails necessary to power Xilinx's Virtex® UltraScale™ family of FPGAs in a compact, highly efficient design. This design uses several of TI's PMBus Point-Of-Load voltage regulators for ease of design/configuration and telemetry of critical rails. It features a UCD90120A for flexible power up and power down sequencing as well as voltage monitoring, current monitoring, and voltage margining through the PMBus interface.
