无法从文档中提取型号,请重试

Update your browser

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience for this site.

首页 > 电子元器件选型 > 逻辑 > 栅极

SN74LVC1G14DCKR

加入BOM

SN74LVC1G14DCKR
已加入BOM:

LVC/LCX/Z SERIES, 1-INPUT INVERT GATE, PDSO5, GREEN, PLASTIC, SC-70, 5 PIN

市场均价:
¥0.5453
市场总库存:
98,903
生命周期状态: Active
技术详情
价格 & 库存
替代料

参考设计

(25)
Altera Cyclone V SoC Power Supply Reference Design - PMP9353.7 - TI Tool Folder
PMP9353: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Cranking Simulator Reference Design for Automotive Applications
PMP7233: This design is a cranking simulator which generates three different cranking pulses to test automotive systems up to 50W. A microcontroller sets the output voltage of a synchronous buck in the range of 2-15V accordingly to the programmed curves. Output current is in the range of 3.3-25A. It is a complete system and all the information necessary to build the device is available.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.8: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
TIDA-00602 Electric Toothbrush Controller Reference Design | TI.com
TIDA-00602: This TI Design uses Texas Instruments’ low-voltage H-Bridge motor driver with an integrated LDO voltage regulator and an ultra-low-power microcontroller (MCU) to demonstrate a full implementation of a battery powered electric toothbrush.
TIDA-00609 Self-Booting Audio System | TI.com
TIDA-00609: The purpose of this TI Design is to provide the designer hardware and software tools that can be used as reference for audio systems. The new revision of the PurePath™ Console Motherboard (RevF) adds stand-alone, self-booting capabilities to allow making compelling demos with any EVM that is compatible with this platform.
Contactless Charger 30mA Single Li-Ion
PMP4651: Complete wireless charger set for small Li-Ion battery charging system. The nominal output curent is 30mA on a single cell battery, while the intput comes from an USB source.
PMP7233 Cranking Simulator Reference Design for Automotive Applications | TI.com
PMP7233: This design is a cranking simulator which generates three different cranking pulses to test automotive systems up to 50W. A microcontroller sets the output voltage of a synchronous buck in the range of 2-15V accordingly to the programmed curves. Output current is in the range of 3.3-25A. It is a complete system and all the information necessary to build the device is available.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.2: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Electric Toothbrush Controller Reference Design
TIDA-00602: This TI Design uses Texas Instruments’ low-voltage H-Bridge motor driver with an integrated LDO voltage regulator and an ultra-low-power microcontroller (MCU) to demonstrate a full implementation of a battery powered electric toothbrush.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.1: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Altera Cyclone V SoC Power Supply Reference Design - PMP9353.1 - TI Tool Folder
PMP9353: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.9: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.5: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.6: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
PMP9353 Altera Cyclone V SoC Power Supply Reference Design | TI.com
PMP9353: The PMP9353 reference design is a complete power solution for Altera Cyclone V SoC devices. This design uses several LMZ3 series modules , two LDOs, and a DDR termination regulator to provide all the necessary rails to power the SoC chip. This design also shows correct power-up sequencing.
16-Bit, 1MSPS Multiplexed Data Acquisition Reference Design
TIPD169: This design is for a 16-bit 1MSPS single-ended, multiplexed data acquisition system (DAQ) for dc inputs. The system is composed of a 16-bit successive-approximation-register (SAR) analog-to-digital converter (ADC), SAR ADC driver, reference driver, and multiplexer. The design shows the process to optimize a single-ended DAQ to achieve fast settling at a sampling rate of 1MSPS.
Self-Booting Audio System
TIDA-00609: The purpose of this TI Design is to provide the designer hardware and software tools that can be used as reference for audio systems. The new revision of the PurePath™ Console Motherboard (RevF) adds stand-alone, self-booting capabilities to allow making compelling demos with any EVM that is compatible with this platform.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.7: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.3: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.10: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
Altera Cyclone V SoC FPGA Power Reference Design
PMP9353: The PMP9353 reference design is a complete power solution for Altera Cyclone V SoC devices. This design uses several LMZ3 series modules , two LDOs, and a DDR termination regulator to provide all the necessary rails to power the SoC chip. This design also shows correct power-up sequencing.
PMP4651 Contactless Charger 30mA Single Li-Ion | TI.com
PMP4651: Complete wireless charger set for small Li-Ion battery charging system. The nominal output curent is 30mA on a single cell battery, while the intput comes from an USB source.
TIPD169 16-Bit, 1MSPS Multiplexed Data Acquisition Reference Design | TI.com
TIPD169: This design is for a 16-bit 1MSPS single-ended, multiplexed data acquisition system (DAQ) for dc inputs. The system is composed of a 16-bit successive-approximation-register (SAR) analog-to-digital converter (ADC), SAR ADC driver, reference driver, and multiplexer. The design shows the process to optimize a single-ended DAQ to achieve fast settling at a sampling rate of 1MSPS.
PMP9353 Altera Cyclone V SoC Power Supply Reference Design | TI.com
PMP9353: The PMP9353 reference design is a complete power solution for Altera Cyclone V SoC devices. This design uses several LMZ3 series modules , two LDOs, and a DDR termination regulator to provide all the necessary rails to power the SoC chip. This design also shows correct power-up sequencing.
Altera Cyclone V SoC Power Supply Reference Design
PMP9353.4: This reference design provides all the power supply rails necessary to power Altera's Cyclone V SoC FPGA. This design uses LMZ3 series modules to generate the rails to power the FPGA.
显示更多价格 & 库存吗?

价格走势

库存走势

显示更多替代料吗?
新建BOM