参考设计
(10)
TIDA-00296 Automotive Body Control Module Driver Reference Design | TI.com
TIDA-00296: TIDA-00296 is a reference design that highlights TI's high-side and low-side relay, motor, and load driver portfolios. The loads for this design (door locks, window lifts, seat heaters, HVAC, lamps, and LEDs) were chosen to show the range of loads that a BCM can drive and how TI's solutions fit into these areas.
TIDA-00271 ADAS Sensor Interconnect Reference Design Board for Remote Camera and Radar Modules | TI.com
TIDA-00271: The ADAS Sensor Interconnect Board is intended for applications where remote sensors like cameras, LIDAR or radar modules need to be connected to a central processing ECU. The board supports up to 3 coaxial and 1 LVDS twisted pair data inputs as well as 3 FMC cable and 1 board to board connector as data outputs to a processing ECU. Camera or other sensor modules connected through the coax connector (SMB standard) are powered directly via the coaxial cable (power over coax) from the interconnect board. Because of an independent complete power solution for all ICs and power over coax on board, a single car battery or similar wide voltage supply can be directly connected to the power connector on the ADAS Sensor Interconnect Board. An on-board uC and LIN interface allow control and configuration of the Interconnect board as well as plug-and-play operation.
TIDA-00156 Capacitive Touch Operated Automotive LED Dome Light with Haptics Feedback | TI.com
TIDA-00156: This TIDA-00156 reference design is a capacitive touch / haptic feedback automotive interior lighting solution optimized for automotive Dome light / Map light applications. The solution features a haptic driver with extensive integrated library (100+ effects) for ERM actuators, constant current LED driver with integrated PWM input permitting LED brightness regulation, low power MCU optimized for capacitive touch, and LIN interface communication.
TIDA-00278 Automotive Cluster Telltale Driver Reference Design | TI.com
TIDA-00278: This TI reference design is an automotive cluster telltale solution that includes a monolithic, medium-voltage, low-current power 12-bit shift register designed for use in systems that require relatively moderate load power, such as LEDs found in automotive clusters. This design is one part of an entire automotive cluster system solution optimized for the mid-end cluster market. The entire solution supports 4.5-40V system capabilities that can withstand cold crank, start stop, and load dump conditions.
PMP11769 700W Automotive External Audio Amplifier Reference Design | TI.com
PMP11769: The PMP11769 reference design is a complete solution for a 700W automotive external amp. The boost converter provides 36.0V @ 10.0A continuous / 20.0A peak from an input voltage of 9-16V. It contains two premium Class-D audio amplifiers, which provide 2x 175W @ 4-Ω load (left & right channel) and 1x 350W @ 2-Ω (subwoofer).The design is well suited for car audio external amp applications due to its thin profile and high power output.
Capacitive Touch Operated Automotive LED Dome Light with Haptics Feedback
TIDA-00156: This TIDA-00156 reference design is a capacitive touch / haptic feedback automotive interior lighting solution optimized for automotive Dome light / Map light applications. The solution features a haptic driver with extensive integrated library (100+ effects) for ERM actuators, constant current LED driver with integrated PWM input permitting LED brightness regulation, low power MCU optimized for capacitive touch, and LIN interface communication.
Automotive Cluster Telltale Driver Reference Design
TIDA-00278: This TI reference design is an automotive cluster telltale solution that includes a monolithic, medium-voltage, low-current power 12-bit shift register designed for use in systems that require relatively moderate load power, such as LEDs found in automotive clusters. This design is one part of an entire automotive cluster system solution optimized for the mid-end cluster market. The entire solution supports 4.5-40V system capabilities that can withstand cold crank, start stop, and load dump conditions.
ADAS Sensor Interconnect Reference Design Board for Remote Camera and Radar Modules
TIDA-00271: The ADAS Sensor Interconnect Board is intended for applications where remote sensors like cameras, LIDAR or radar modules need to be connected to a central processing ECU. The board supports up to 3 coaxial and 1 LVDS twisted pair data inputs as well as 3 FMC cable and 1 board to board connector as data outputs to a processing ECU. Camera or other sensor modules connected through the coax connector (SMB standard) are powered directly via the coaxial cable (power over coax) from the interconnect board. Because of an independent complete power solution for all ICs and power over coax on board, a single car battery or similar wide voltage supply can be directly connected to the power connector on the ADAS Sensor Interconnect Board. An on-board uC and LIN interface allow control and configuration of the Interconnect board as well as plug-and-play operation.
