文档下载
1N5406数据表
参考设计(22)
21V to 26V @ 4A LED Driver
PMP5715.2: The PMP5715.2 is the second block, an LLC resonant isolated stage, which takes the 410V from the PFC stage and delivers 26V @ 4A constant current, suitable for LED panel driving. The loop is closed by means of a current transformer, connected to the output windings. An open string protection is accomplished by and optocoupler and a zener diode.
90 - 134VAc input with isolated Flyback, dual output USB chargers, and LDO Reference Design - PMP10878.3 - TI Tool Folder
PMP10878: The PMP10878 is an isolated dual port USB charger powered from an AC source. This design allows for up to 36W of power delivery through both USB chargers and the secondary side of a flyback.
Universal AC Input to 30Vmax@6A Lead-acid Battery Charger Reference Design with PFC
PMP10110.2: The PMP10110 design converts the universal input AC voltage to isolated 17V...30V@6A and is suitable to charge lead-acid or Li-Ion batteries. The converter is a constant-V and constant-I genarator and the set points for output voltage (charge level) and current are settable by means of two PWM signals. The first stage is a PFC boost while the isolation ad current stabilization is performed by DC-DC half bridge stage. An isolated quasi-resonant flyback converter supplies all internal voltages and provide some extra current for external loads (fan or analog section), in details 12V@400mA and 5V@300mA.
Universal AC Input 150W Single String 200V/700mA Output LLC Converter without CT
PMP4350: The reference design is a high effiency (>94%) isolated AC/DC single string output LED lighting solution for high watt (>100W) general LED lighting. The topology uses Transition Mode (TM) PFC plus LLC control, which can support PWM dimming and analog dimming on the output side. The target application for this reference design is TV LED backlight, outdoor and high-bay general LED lighting. CT is eliminated in the design and the PSR controller UCC28700 is used for aux power in order to reduce overall cost.
21V to 26V @ 4A LED Driver
PMP5715.1: The PMP5715.1 is a transition mode (TM) Boost PFC that, from high line (176Vac to 280Vac), supplies 410V @ 283mA to the second block: the LLC stage.
Universal Input, 21V…26V @ 4A LED Driver
PMP5739: The PMP5739 is a the universal line version of PMP5715. By means of a PFC TM Boost and a LLC stage delivers 21V...26V @ 4A constant current, suitable for LED panel driving. The loop is closed by means of a current transformer, connected to the output windings. An open string protection is accomplished by and optocoupler and a zener diode
High Efficiency 350W AC/DC Power Supply Reference Design
PMP11303.1: PMP11303 is high-efficiency AC/DC power supply reference design with universal AC input and 25V/13.5A and 12V/1A outputs. LLC+PFC combo IC UCC29950 is applied for the main power stages with 25V/13.5A output while UCC28730 is applied for the auxiliary power with 12V/1A output. This design has low no load power comsumption (152mW@230VAC) and over 93% peak efficiency. This design also meet 80PLUS Gold requirement for 115VAC Internal power supplies.
Universal AC Input to 30Vmax@6A Lead-acid Battery Charger Reference Design with PFC - PMP10110.1 - TI Tool Folder
PMP10110: The PMP10110 design converts the universal input AC voltage to isolated 17V...30V@6A and is suitable to charge lead-acid or Li-Ion batteries. The converter is a constant-V and constant-I genarator and the set points for output voltage (charge level) and current are settable by means of two PWM signals. The first stage is a PFC boost while the isolation ad current stabilization is performed by DC-DC half bridge stage. An isolated quasi-resonant flyback converter supplies all internal voltages and provide some extra current for external loads (fan or analog section), in details 12V@400mA and 5V@300mA.
90 - 134VAc input with isolated Flyback, dual output USB chargers, and LDO Reference Design
PMP10878.3: The PMP10878 is an isolated dual port USB charger powered from an AC source. This design allows for up to 36W of power delivery through both USB chargers and the secondary side of a flyback.
Universal AC Input to 30Vmax@6A Lead-acid Battery Charger Reference Design with PFC
PMP10110.1: The PMP10110 design converts the universal input AC voltage to isolated 17V...30V@6A and is suitable to charge lead-acid or Li-Ion batteries. The converter is a constant-V and constant-I genarator and the set points for output voltage (charge level) and current are settable by means of two PWM signals. The first stage is a PFC boost while the isolation ad current stabilization is performed by DC-DC half bridge stage. An isolated quasi-resonant flyback converter supplies all internal voltages and provide some extra current for external loads (fan or analog section), in details 12V@400mA and 5V@300mA.
High Efficiency 350W AC/DC Power Supply Reference Design
PMP11303.2: PMP11303 is high-efficiency AC/DC power supply reference design with universal AC input and 25V/13.5A and 12V/1A outputs. LLC+PFC combo IC UCC29950 is applied for the main power stages with 25V/13.5A output while UCC28730 is applied for the auxiliary power with 12V/1A output. This design has low no load power comsumption (152mW@230VAC) and over 93% peak efficiency. This design also meet 80PLUS Gold requirement for 115VAC Internal power supplies.
5V80A Low Profile High Efficiency Power Supply
PMP4332: This reference design demonstrates a high efficiency, low profile (<1") power supply using PFC+S.R. LLC solution. The overall efficiency is up to 88% with 5V80A output.
Universal AC input(90V-264V) high efficiency 150W single string 200V/700mA output LLC converter
PMP4317: The reference design is a very high effiency (>94%) isolated AC/DC single string output LED lighting solution for high watt (>100W) general LED lighting. The topology uses Transition Mode (TM) PFC plus LLC control, which can support PWM dimming and analog dimming on the output side. The target application for this reference design is outdoor and high-bay general LED lighting
Universal AC Input to 30Vmax@6A Lead-acid Battery Charger Reference Design with PFC
PMP10110.4: The PMP10110 design converts the universal input AC voltage to isolated 17V...30V@6A and is suitable to charge lead-acid or Li-Ion batteries. The converter is a constant-V and constant-I genarator and the set points for output voltage (charge level) and current are settable by means of two PWM signals. The first stage is a PFC boost while the isolation ad current stabilization is performed by DC-DC half bridge stage. An isolated quasi-resonant flyback converter supplies all internal voltages and provide some extra current for external loads (fan or analog section), in details 12V@400mA and 5V@300mA.
90 - 134VAc input with isolated Flyback, dual output USB chargers, and LDO Reference Design
PMP10878.2: The PMP10878 is an isolated dual port USB charger powered from an AC source. This design allows for up to 36W of power delivery through both USB chargers and the secondary side of a flyback.
90 - 134VAc input with isolated Flyback, dual output USB chargers, and LDO Reference Design
PMP10878.4: The PMP10878 is an isolated dual port USB charger powered from an AC source. This design allows for up to 36W of power delivery through both USB chargers and the secondary side of a flyback.
A Fully Featured, 350W Offline High Performance Power Supply
PMP5568: This project is a complete 350W, high performance, high speed offline power supply solution. It contains a novel, microcontroller-driven synchronous bridge rectifier, a 2-phase interleaved PFC stage and a phase-shifted fullbridge as down converter. It has an universal input (85 .. 265V AC) and the output voltage is adjustable between 12 and 14V. The continuous output current is 25A, the peak current is 27A. A second microcontroller monitors several values (input voltage, PFC voltage, output voltage, output current, temperatures), is the interface to the user (LCD, push-buttons), adjusts the output voltage and synchronizes the switching frequency of all converters.
90 - 134VAc input with isolated Flyback, dual output USB chargers, and LDO Reference Design
PMP10878.1: The PMP10878 is an isolated dual port USB charger powered from an AC source. This design allows for up to 36W of power delivery through both USB chargers and the secondary side of a flyback.
Universal AC Input to 30Vmax@6A Lead-acid Battery Charger Reference Design with PFC
PMP10110.3: The PMP10110 design converts the universal input AC voltage to isolated 17V...30V@6A and is suitable to charge lead-acid or Li-Ion batteries. The converter is a constant-V and constant-I genarator and the set points for output voltage (charge level) and current are settable by means of two PWM signals. The first stage is a PFC boost while the isolation ad current stabilization is performed by DC-DC half bridge stage. An isolated quasi-resonant flyback converter supplies all internal voltages and provide some extra current for external loads (fan or analog section), in details 12V@400mA and 5V@300mA.
300-W PFC plus Resonant LLC Half-Bridge controller off-line AC/DC PSU Module
TIDA-00520: This is a high efficiency 300-W AC/DC reference design. The design can be biased from external supply or configured for Self-Bias Auxillary mode for operation directly off the AC mains. The PFC is fully internally compensated, reducing design complexity and pcb design. Protections include 3-level OCP, line brown-out, PFC Bulk OVP plus UVP and OTP.
85VAC-265VAC Input 24V/240W Output 90% Efficient PFC + LLC
PMP5141: The PMP5141 reference design provides a 24V/10A output with power factor correction from a universal AC input voltage range. This design uses the UCC28051 to control the front end PFC boost stage. The output of the PFC is followed by a UCC25600 LLC resonant half-bridge. The total efficieny, from input to output is over 92% from a 220VAC/50Hz input and over 90% from a 120VAC/60Hz input.
国产器件
分销商编号：
Good-Ark_1N5406
单价:
暂无价格信息
请输入数量：
-+
库存/包装：
0
起订量：
1
递增量：
1
国产器件 其它编号产品
分销商编号：
TC_1N5406
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
分销商编号：
Excel_1N5406
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
分销商编号：
Lunsure_1N5406
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
分销商编号：
Dachang_1N5406
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
