更多产品参数
Board Connector, 3 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, White Insulator, Receptacle
制造商:
Molex
制造商型号:
22-27-2031
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
22-27-2031数据表
参考设计(4)
Automotive 60W Brushless DC (BLDC) Motor Drive
TIDA-00143: This TIDA-00143 reference design is a BLDC motor controller and is designed to operate from a single 12V (nominal) power supply which can vary over a wide range of voltages as found in typical automotive applications. The board is designed to drive motors in the 60W range, which require currents of 5 Amps. The size and layout of the board is intended to facilitate evaluation of the drive electronics and firmware, with easy access to key signals on individual test points. Connection to a wide variety of motors is possible using either the 3-contact connector or by soldering motor phase wires to plated-through holes in the board. The 12Vdc power is fused to prevent damage to the board or to bench power supplies in case of a motor fault during testing. Command and status of the motor can be communicated through the standard JTAG connector, or through PWM input and output signals. Users can also re-program the microcontroller through the JTAG connector, allowing customization to a wide variety of applications.
672W Highly Integrated Reference Design for Automotive Bidirectional 48V-12V Converter
TIDA-00558: Today's automotive power consumtion is 3KW, which will increase to 10KW in next 5 years and 12V batttary is unable to provide that much power. 48-12V bi-directional convertor provides high power requirement solution with two phases each capable of running 28A. This solution allows bidirectional current control of both phases using a C2000 control stick and firmware OCP & OVP. The 48-12V bi-directional converter removes the voltage conditioner need and distributes loads more evenly. The 48V battary is used to power high torque motors and other high power components such as A/C compressors and EPS, while no change to 12V battery loads.
340W Digital Controlled LLC Resonant Half-Bridge DC-to-DC Power Conversion Reference Design
TIDA-00512: This design is a LLC resonant half-bridge DC-DC power converter with digital control using 3138ACC32EVM-149 daughter-card. The daughter-card control functions with preloaded firmware providing the required control functions for a LLC resonant half-bridge converter. The TIDA-00512 (3138ALLCEVM-150) accepts a DC input from 350VDC to 400VDC, and outputs a nominal 12VDC with full load output power of 340W, or full output current of 29A. As seen at APEC
360W Phase Shift Full Bridge Resonant LLC with High Side Low Side Driver Reference Design
TIDA-00381: The power supply employs Full Bridge Resonant LLC with phase shift operating at ramp up, light load, low output voltage. This operating mode can replace PWM operating mode in LLC, which can improve efficiency signficantly in light load.
Avnet Americas
分销商编号：
0022272031
交货地:
中国大陆
港台地区
单价:
- 阶梯 人民币价格(含税) 美元价格
- 1+ ¥0.7856 $0.1020
- 80000+ ¥0.6276 $0.0815
- 200000+ ¥0.6005 $0.0780
- 400000+ ¥0.5709 $0.0741
- 1000000+ ¥0.5679 $0.0737
请输入数量：
-+
总计:
库存/包装：
19,581
/ Bulk
起订量：
1
递增量：
1
备货时间：
25 Weeks, 0 Days
Avnet Americas 其它编号产品
分销商编号：
13T6895
起订量：
1
包装方式 * 包装量：
Bulk * 1
单价：
$0.3570
分销商编号：
72K5810
起订量：
1
包装方式 * 包装量：
Bulk * 1
单价：
$0.3450
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
