更多产品参数
ADC, Proprietary Method, 14-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS
制造商:
Texas Instruments
制造商型号:
ADS4249IRGCT
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
ADS4249IRGCT数据表
参考设计(8)
TIDA-00069 FPGA Firmware Example of How To Interface Altera FPGAs to High-Speed LVDS-Interface Data Converters | TI.com
TIDA-00069: This reference design and the associated example Verilog code can be used as a starting point for interfacing Altera FPGAs to Texas Instruments' high-speed LVDS-interface analog-to-digital converters (ADC) and digital-to-analog converters (DAC). The firmware implementation is explained and the required timing constraints are discussed.
TIDA-00070 FPGA Firmware Project for Measuring Bit Errors in the Output Word of an A to D Converter | TI.com
TIDA-00070: For applications where there are bit errors and resulting sample errors (also called sparkle codes, word errors, or code errors), the ability to measure the Error rates caused by these bit errors is important. This FPGA firmware based application note proposes a method to accurately measure these errors over an indefinite time and provides an example of how this measurement can be done using a simple FPGA platform. Code is available on request for the two examples described in the application note.
Basestation Transceiver with DPD Feedback Path
TIDA-00068: The design is for a small cell base station development platform. It provides two real receive paths, two complex transmit paths, and a shared real feedback path. This design has macro basestation performance, but with small cell base station footprint. The current design handles up to 20MHz of bandwidth.
Dual-Wideband RF-to-Digital Receiver Design
TIDA-00073: The TSW1265EVM is an example design of a wideband RF to digital dual receiver solution capable of digitizing up to 125MHz of spectrum. The system provides a reference on how to use the ADS4249, LMH6521, LMK0480x, and a dual mixer to achieve this. This reference EVEM coupled with a capture card such as the TSW1400 can be used to capture and analyze narrow band and wideband signals. Instructions are provided on how to change the LO and IF frequencies for different application needs. The TIDA-00073 was implemented with hardware from the TSW1265EVM.
TIDA-00068 Basestation Transceiver with DPD Feedback Path | TI.com
TIDA-00068: The design is for a small cell base station development platform. It provides two real receive paths, two complex transmit paths, and a shared real feedback path. This design has macro basestation performance, but with small cell base station footprint. The current design handles up to 20MHz of bandwidth.
FPGA Firmware Project for Measuring Bit Errors in the Output Word of an A to D Converter
TIDA-00070: For applications where there are bit errors and resulting sample errors (also called sparkle codes, word errors, or code errors), the ability to measure the Error rates caused by these bit errors is important. This FPGA firmware based application note proposes a method to accurately measure these errors over an indefinite time and provides an example of how this measurement can be done using a simple FPGA platform. Code is available on request for the two examples described in the application note.
FPGA Firmware Example of How To Interface Altera FPGAs to High-Speed LVDS-Interface Data Converters
TIDA-00069: This reference design and the associated example Verilog code can be used as a starting point for interfacing Altera FPGAs to Texas Instruments' high-speed LVDS-interface analog-to-digital converters (ADC) and digital-to-analog converters (DAC). The firmware implementation is explained and the required timing constraints are discussed.
TIDA-00073 Dual-Wideband RF-to-Digital Receiver Design | TI.com
TIDA-00073: The TSW1265EVM is an example design of a wideband RF to digital dual receiver solution capable of digitizing up to 125MHz of spectrum. The system provides a reference on how to use the ADS4249, LMH6521, LMK0480x, and a dual mixer to achieve this. This reference EVEM coupled with a capture card such as the TSW1400 can be used to capture and analyze narrow band and wideband signals. Instructions are provided on how to change the LO and IF frequencies for different application needs. The TIDA-00073 was implemented with hardware from the TSW1265EVM.
Bristol Electronics
分销商编号：
未知
单价:
暂无价格信息
请输入数量：
-+
库存/包装：
1
起订量：
1
递增量：
1
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
