文档下载
BAS16-7-F数据表
参考设计(12)
Automotive Range Boost Converter Drives Two Strings of LEDs Reference Design
PMP8948: This wide input voltage range boost operates from an input of 9V - 32V and regulates current in two strings of 13 LEDs. Additionally, a second control loop monitors and regulates the input current during drop outs or faults. This low cost design operates at greater than 94% efficiency.
40W Synchronous ZETA Converter with Two Inductors Reference Design
PMP9581_REVC: This dual-inductor, 13.2V at 4A, synchronous ZETA converter achieves greater than 93% efficiency at full load. It is capable of 5A out for Vin greater than 10V. It utilizes all surface mount components, maintains a low temperature rise and is capable of high peak load transients. See PMP9581 REVB for this design with a coupled inductor.
40W Synchronous ZETA Converter with Coupled-Inductor Reference Design
PMP9581_REVB: This coupled-inductor, 13.2V at 4A, synchronous ZETA converter achieves greater than 95% efficiency at full load. It is capable of 5A out for Vin greater than 10V. It utilizes all surface mount components, maintains a low temperature rise and is capable of high peak load transients. See PMP9581 REVC for this design with seperate inductors.
24V Input, 12V/3.5A Output CCM Flyback
PMP2829: This reference design uses the UCC2808A to control a 12V/42W flyback operated in continuous conduction mode. The CSD19531Q5A 6-milliOhm, 100V FET enables this design to achieve over 88% efficiency.
20W SEPIC Low-Cost Lead Acid Battery Charger Reference Design
PMP10081: The PMP10081 reference design shows a simple and low-cost solution of a lead acid battery charger. The input voltage range is from 9V to 36V and the maximum output voltage is 13.8V, which is sufficient for a six-cell lead acid battery with a charge current up to 1.5A.
40V to 60V DC input; 40W Dual output Isolated Flyback Converter (6V@4.33A)
PMP7917.1: PMP7917 is a dual output flyback converter capable of 40W output power. This design uses the LM5021-1 current-mode PWM controller. The operating input voltage range is 40V to 60. The outputs are 6V at 4.33A and 4V at 3.5A. Self-driven synchronous operation is employed for the secondary rectifiers, resulting in good cross regulation.
40V to 60V DC input; 40W Dual output Isolated Flyback Converter (6V@4.33A) - PMP7917.1 - TI Tool Folder
PMP7917: PMP7917 is a dual output flyback converter capable of 40W output power. This design uses the LM5021-1 current-mode PWM controller. The operating input voltage range is 40V to 60. The outputs are 6V at 4.33A and 4V at 3.5A. Self-driven synchronous operation is employed for the secondary rectifiers, resulting in good cross regulation.
40V to 60V DC input; 40W Dual output Isolated Flyback Converter (6V@4.33A)
PMP7917.2: PMP7917 is a dual output flyback converter capable of 40W output power. This design uses the LM5021-1 current-mode PWM controller. The operating input voltage range is 40V to 60. The outputs are 6V at 4.33A and 4V at 3.5A. Self-driven synchronous operation is employed for the secondary rectifiers, resulting in good cross regulation.
High Eff 2Stage Univ Input Power Supply-Transition Mode PFC LLC Resonant Conv Reference Design
PMP8911: Low EMI, high efficiency, high power factor and reliable power supply are main focus of the PMP8911 design for telecom applications. Transient mode (TM) power factor correction (PFC) with UCC28051 and LLC series resonant converter (SRC) with UCC25600 are applied in PMP8911. Low EMI is expected with zero voltage switching on TM-PFC and LLC-SRC switches. An overall 92% efficiency is achieved at 100W full load. In addition, several protections are embedded into this design which includes input under-voltage protection, input over-voltage protection, output over-voltage protection, and output hic-cup over-power protection.
300-W PFC plus Resonant LLC Half-Bridge controller off-line AC/DC PSU Module
TIDA-00520: This is a high efficiency 300-W AC/DC reference design. The design can be biased from external supply or configured for Self-Bias Auxillary mode for operation directly off the AC mains. The PFC is fully internally compensated, reducing design complexity and pcb design. Protections include 3-level OCP, line brown-out, PFC Bulk OVP plus UVP and OTP.
380VDC Input, 24V/170W Active Clamp Forward
PMP7391: This reference design uses the UCC2894 to control an active clamp forward converter that generates an isolated 24V at 7A from a 380VDC input. This supply is intended to be used with a PFC boost front-end and requires an external 12V bias voltage for house-keeping on the primary side. This supply is over 91% efficient at full load.
Automotive Boost Power Supply for Audio Applications
PMP9637: The PMP9637 4-phase boost power supply enables high-efficiency boost dc/dc conversion of an 8.5V to 18V input Automotive battery voltage to 44V output at 17 Amperes in a compact form factor for Audio applications. The TPS40090 4-phase PWM controller is used with two (2) UCC27324D 4A dual FET drivers and CSD18534Q5A 60V NexFETs to deliver 748W output power in only 120mm x 70mm.
Newark
分销商编号：
65W8443
交货地:
港台地区
单价:
- 阶梯 人民币价格(含税) 美元价格
- 1+ - $0.0140
- 10+ - $0.0140
- 100+ - $0.0140
- 1000+ - $0.0140
请输入数量：
-+
总计:
库存/包装：
9,370
/ Cut Tape
起订量：
1
递增量：
1
生产日期：
0
Newark 其它编号产品
分销商编号：
23AJ5575
起订量：
1
包装方式 * 包装量：
Cut Tape * 1
单价：
$0.1060
分销商编号：
65W8444
起订量：
3,000
包装方式 * 包装量：
Tape & Reel * 1
单价：
-
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
