更多产品参数
Rectifier Diode, Schottky, 2 Element, 0.2A, 30V V(RRM), Silicon
制造商:
Diodes Incorporated
制造商型号:
BAT54S-7-F
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
BAT54S-7-F数据表
参考设计(13)
High Efficiency 36-60V Input Isolated Synchronous Flyback Reference Design with Dual Outputs
PMP11065.1: PMP11065 is an isolated synchronous flyback converter with dual outputs of 3.3V/2.5A and 5V/2.8A. The 36-60V input is suitable for use in most telecom and PoE applications that require high efficiency.
220V-400VDC Input, 12V/160W Active Clamp Forward
PMP7410: This reference design generates an isolated 12V/160W output from a high voltage DC input. This design is intended to operate from the output of PFC front end regulator. The UCC2897A is used to control an active clamp forward converter. Texas Instruments CSD18531Q5A synchronous rectifiers allow this design to achieve over 92% efficiency. An accurate current limit is provided by directly sensing the output current. A clock pulse output is also provided for synchronizing with other converters.
UPOE High-Efficiency Flyback Converter (19V/2.3A) for Forced 4-Pair PoE PD Apps Reference Design
TIDA-00539: TIDA-00539 uses two TPS2378 PD controllers for a forced 4-pair UPOE solution to 51W non-standard PoE PD applications. It incorportates the UCC2897A controller in a high-efficiency, great transient response (driven) synch flyback converter capble of 19V at 2.3A.
Offline AC/DC 75W 2-Switch Quasi-Resonant Flyback Converter Reference Design
PMP10035: This design uses the LM5023 flyback controller for the 2-Switch Quasi-Resonant Flyback Topology. It generates an isolated output (19.5V@3.84A) from an universal input (85VAC - 265VAC).
High Efficiency 100W Active Clamp Forward 220V-400VDC Input, 28V/ 3.6A Reference Design
PMP7453: This reference design generates an isolated 28V/100W output from a high voltage DC input. This design is intended to operate from the output of PFC front end regulator. The UCC2897A is used to control an active clamp forward converter. Self-driven synchronous rectifiers allow for over 92% efficiency. An accurate current limit is provided by directly sensing the output current. A clock pulse output is also provided for synchronizing with other converters.
Class 4 PoE High Efficiency Active Clamp Forward Converter (3.3V) Reference Design
PMP10288: The PMP10288 reference design is a Power Over Ethernet (POE) active clamp forward converter. It features the TPS23754, which is a combination of a POE Powered Device (PD) controller and PWM controller. CSD17501Q5A FETs are used for high efficiency synchronous rectification. The input accepts standard Type 2 POE voltage of 42.5VDC-57VDC or a 36VDC-57VDC auxiliary voltage. The output power is an isolated 3.3VDC at 6.9A with PoE input or 3.3VDC at 7.2A with auxiliary input.
High Efficiency 36-60V Input Isolated Synchronous Flyback Reference Design with Dual Outputs
PMP11065.2: PMP11065 is an isolated synchronous flyback converter with dual outputs of 3.3V/2.5A and 5V/2.8A. The 36-60V input is suitable for use in most telecom and PoE applications that require high efficiency.
56W Active Clamp for Telecom Apps Reference Design
PMP10202: This reference design provides 28V out of 48V input voltage to supply noise sensitive loads
360W Phase Shift Full Bridge Resonant LLC with High Side Low Side Driver Reference Design
TIDA-00381: The power supply employs Full Bridge Resonant LLC with phase shift operating at ramp up, light load, low output voltage. This operating mode can replace PWM operating mode in LLC, which can improve efficiency signficantly in light load.
220V-400VDC Input, 5V/100W Active Clamp Forward
PMP7413: This reference design generates an isolated 5V/100W output from a high voltage DC input. This design is intended to operate from the output of a PFC front end regulator. The UCC2897A is used to control an active clamp forward converter. Self-driven synchronous rectifiers allow for 91% efficiency. An accurate current limit is provided by directly sensing the output current. A clock pulse output is also provided for synchronizing with other converters.
220V-400VDC Input, 12V/100W Active Clamp Forward
PMP6961: This reference design generates an isolated 12V/100W output from a high voltage DC input. This design is intended to operate from the output of a PFC front end regulator. The UCC2897A is used to control an active clamp forward converter. Self-driven synchronous rectifiers allow for over 91% efficiency. An accurate current limit is provided by directly sensing the output current. A clock pulse output is also provided for synchronizing with other converters.
Class 3 5V/2.3A High Efficiency Synchronous Flyback Converter for PoE Application Reference Design
PMP9175: This converter is used for Class 3 PoE applications where high efficiency and isolation are required. The specific output for this design is 5V@2.3A. The flyback converter with synchronous rectifier provides excellent efficiency and small size for PoE applications such as a IP Phones. The TPS23753APW contains both the PoE Powered Device and the PWM controller functions
High Efficiency Synchronous Flyback with 36-72Vin to 5Vout@2A Reference Design
PMP8917: PMP8917 has been designed as a competitive open-frame alternative for the communications market with 36-72Vin to 5V/2A. The product is supplied in the industry standard footprint of 2.0 x 1.0 x 0.394 inches. PMP8917 has a basic insulation system from input to output making it suitable for a wide variety of applications. LM5020 is used as synchronous Flyback converter controller for PMP8917 with 92.9% converter efficiency.
TME
分销商编号：
BAT54S-7-F
交货地:
中国大陆
港台地区
单价:
- 阶梯 人民币价格(含税) 美元价格
- 1+ ¥0.9245 $0.1200
- 10+ ¥0.6780 $0.0880
- 100+ ¥0.4283 $0.0556
- 500+ ¥0.3290 $0.0427
- 1000+ ¥0.2727 $0.0354
- 2000+ ¥0.2288 $0.0297
- 3000+ ¥0.2080 $0.0270
- 6000+ ¥0.1780 $0.0231
- 12000+ ¥0.1672 $0.0217
请输入数量：
-+
总计:
库存/包装：
0
起订量：
1
递增量：
1
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
