文档下载
BAV19数据表
参考设计(16)
Isolated LED Driver with PFC for A19 Lamp Application using LM3447 - 230VAC, 36VLED 12W
PMP8013: The main purpose of this reference design is to demonstrate the LM3447 is ideal for implementing high dimmable performance with single stage PFC, isolated LED lamp drivers where simplicity, low-component count and small solution size. The operating conditions and performance of the reference design are as follows: ●190VAC to 264VAC, 50Hz Input Voltage ●32V to 38V LED Voltage ●280mA Regulated LED Current ●> 81% Typical System Efficiency ●High Power Factor > 0.9 ●Output Short-Circuit and Open-Circuit Protection
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.2: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
AC Input, 6 Channel LED Strings with 30W Output Reference Design - PMP4484.8 - TI Tool Folder
PMP4484: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
AC Input, 6 Channel LED Strings with 30W Output Reference Design - PMP4484.6 - TI Tool Folder
PMP4484: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.6: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
Multioutput Isolated Flyback Supplies 23V@1A, 16.9V@200mA and 9V@300mA from High-line Ref. Design
PMP8582: The PMP8582 generates three output: 23V@1A, 16.9V@200mA (400mApeak T<10sec.) and 9V@300mA. The input voltage is 165V…265Vac. The main loop is closed to the 23Vout. A low power LM9364-20 tranfers the low AC voltage information to secondary side.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.8: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
Polymer TFT Display Supply
PMP2617: A multi-Buck solution, followed by a 5V USB supply and +/-25V…+/-35V generator (with a 0.5% precision on tracking) provides all voltages to a Polymer TFT display. Very low height is the main challenge.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.4: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.1: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
Wireless Thermocouple Sensor Transmitter DevPack for SensorTag Reference Design
TIDA-00650: The TIDA-00650 reference design shows how to build a wireless thermocouple based temperature transmitter. The design is in the DevPack form factor which can be used in combination with TIs SensorTag. This allows for the development of a wireless link with Bluetooth® Smart or other wireless technologies (Zigbee, WiFi, sub 1GHz). The 24-bit ∆Σ sensor front-end utilized in this design allows for operation over the -40 to +85C temperature range.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.3: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.7: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.5: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
100-240VAC Input, 60W, 2-string, PWM Dimmable LED Driver Reference Design
PMP6024: PMP6024 is an offline, LED driver circuit consisting of an isolated, power-factor corrected, constant output voltage flyback converter followed by two DC/DC buck LED current controllers. It is suitable for indoor or outdoor area lighting applications of 3500-5000 lumens (depending upon LED selection). LED brightness is controlled by a 3.3V, 10kHz PWM signal which is converted to a DC level adjustment of the LED string currents avoiding PWM modulation of the light output.
AC Input, 6 Channel LED Strings with 30W Output Reference Design
PMP4484.9: The PMP4484 is a power reference design with AC input. It is a isolated LED driver, provides 6 channel LED outputs with PWM dimming. It implements a high PF flyback controller UCC28810 to output DC 40V, the Constant Current Buck LED Driver LM3414HV downs the voltage to 30V to drive LED. The degisn also provides 3.3Vo to MCU by the buck conller LMR16006, and a 10Vo to RS485. The system achieves high efficiency and high PF.
国产器件
分销商编号：
Dachang_BAV19
单价:
暂无价格信息
请输入数量：
-+
库存/包装：
0
起订量：
1
递增量：
1
国产器件 其它编号产品
分销商编号：
Good-Ark_BAV19
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
分销商编号：
Galaxy_BAV19
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
分销商编号：
Excel_BAV19
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
分销商编号：
Gulfsemi_BAV19
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
