更多产品参数
Res Thick Film 0603 19.6K Ohm 1% 1/10W ±100ppm/C Molded SMD Paper T/R
制造商:
Vishay
制造商型号:
CRCW060319K6FKEA
符合标准:
不含铅
数据手册:
文档下载
CRCW060319K6FKEA数据表
参考设计(7)
Altera Stratix Vgx Reference Design
PMP9284: Reference Design for the Stratix Vgx. This design takes into account sequencing needs. Applicable for 25W applications
432W High-Efficiency Single-Phase Synchronous Buck Converter Reference Design
PMP10509: PMP10509 is a High-Efficiency Single-Phase Synchronous Buck Converter using the LM25117 controller IC. The design accepts an input voltage of 30.4Vin to 33.6Vin (32Vin Nominal) and provides an output of 24Vout capable of supplying 18A of continuous current to the load.
Universal 85VAC-264VAC Input, 24V 1A Output, PSR Flyback Reference Design
PMP10468: This design uses low-cost primary side regulation (PSR) IC UCC28700 for universal 85VAC-264VAC input range. A 24V output is generated with maximum 24W rating.
High-Efficiency Adjustable Output Synchronous Boost Converter Reference Design
PMP10538: PMP10538 is a Single-Phase Synchronous Boost Converter using the LM5122 controller IC. The design accepts an input voltage of 18Vin to 20Vin and provides an output of 30Vout to 54Vout, capable of supplying 1.7A of continuous current to the load or 0A to 3.4A Max. The output voltage can be adjusted between 30Vout and 54Vout by driving the Vadj. input of the Op-Amp circuit between 0V and 3V.
15W Industrial Power Supply Reference Design
PMP10571: PMP10571 is a sync isolated Flybuck-boost converter with a negative primary voltage. The power supply has a synchronous buck regulator, LM5160, and a versa pack transformer. The synchronous rectifier on the secondary improves efficiency and regulation under heavy load. The design accepts an input voltage of 18V to 30V, and outputs 5V, capable of providing 3A of current to the load, making it suitable for 24V input industrial application. The Fly-Buck topology can regulate the secondary side outputs without opto-coupler or aux winding, and is capable of achieving good regulation within ±5%. With LM5160's Constan On-Time control, no loop compensation is required, which simplifies the design and helps reducing the external part count and BOM cost.
Battery Powered Boost Converter Delivers 120Vdc @ 10mA Reference Design
PMP8956: This design is driven by the LM3481. The LM3481 is a versatile Low-Side N-FET high performance controller for switching regulators. The switching frequency of the LM3481 can be adjusted to any value between 100 kHz and 1 MHz by using a single external resistor or by synchronizing it to an external clock. The LM3481 has built in protection features such as thermal shutdown, short-circuit protection and over voltage protection. Power saving shutdown mode reduces the total supply current to 5µA and allows power supply sequencing.
15W Automotive Start Stop Power Supply
PMP9476: PMP9476 is non-sync buck converter plus a non-sync boost controller accepts an input voltage of 3.5V to 40V, and outputs 5V, capable of providing 3A of current to the load.
