更多产品参数
Power Field-Effect Transistor, 100A I(D), 30V, 0.0024ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
制造商:
ACTIVE COMPNTS/DIODES
制造商型号:
CSD17312Q5
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
CSD17312Q5数据表
参考设计(14)
18Vdc-60Vdc Input, 3.3V @ 30A Output, 93% Efficient Active Clamp Forward
PMP8252: The PMP8252 reference design provides 3.3V at 30A from a wide range 18V-60V telecom input with a peak efficiency that is greater than 93%. This design uses the UCC2897A active clamp controller along with Texas Instruments' NexFET power MOSFETs for synchronous rectification.
PMP6753 18Vdc-60Vdc Input, 3.3V @ 25A Output, 94% Efficient Active Clamp Forward | TI.com
PMP6753: The PMP6753 reference design provides 3.3V at 25A from a wide range 18V-60V telecom input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller along with Texas Instruments' NexFET power MOSFETs for synchronous rectification.
PMP6942 "18V-36V Input 6V/100W 95% Efficient Active Clamp Forward | TI.com
PMP6942: The PMP6942 reference design provides 6V at 100W (17A) from a standard 24V telecom input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller along with the TI CSD17312Q5 NexFET synchronous rectifier.
Wide input 18V to 75V, 3.3V @ 20Amax
PMP7032: wide input range 4:1 telecom active clamp forward 3V3 bus converter that provides I/O voltage up to 20Amps peak
PMP10478 85 to 265VAC Input 5V@30W Dual Port Charger For Tablets and Smart Phones Reference Design | TI.com
PMP10478: This reference design is capable of charging two devices at 2.5A each with over 82% efficiency. The UCC24610 synchronous rectifier controller and CSD17312Q5 FET reduce the rectifier loss and provide high efficiency with a minimal increase in cost. The TPS2561A provides accurate and independent current limit protection for each port. The TPS2513 communicates with the mobile device under charge to ensure that the charger is accepted by most phone and tablet models. This compact design consumes a volume of only 2.15" x 1.7" x 1.0".
Telecom Bus Converter for Module Replacement
PMP5711: Highest performance, highest power 175W telecom active clamp forward, 5V @35A w/ lowest form factor
PMP7032 Wide input 18V to 75V, 3.3V @ 20Amax | TI.com
PMP7032: wide input range 4:1 telecom active clamp forward 3V3 bus converter that provides I/O voltage up to 20Amps peak
PMP8366 36V-75VDC Input, 5V/20A Active Clamp Forward, 1/8th Brick Form Factor | TI.com
PMP8366: This reference design generates a 5V/20A output from a standard 48V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD17312Q5, implemented as self-driven synchronous rectifiers, provide for a highly efficient design. This design is laid out in a standard 1/8th brick footprint and includes enable, remote sense, and output overvoltage features.
36V-75VDC Input, 5V/20A Active Clamp Forward, 1/8th Brick Form Factor
PMP8366: This reference design generates a 5V/20A output from a standard 48V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD17312Q5, implemented as self-driven synchronous rectifiers, provide for a highly efficient design. This design is laid out in a standard 1/8th brick footprint and includes enable, remote sense, and output overvoltage features.
"18V-36V Input 6V/100W 95% Efficient Active Clamp Forward
PMP6942: The PMP6942 reference design provides 6V at 100W (17A) from a standard 24V telecom input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller along with the TI CSD17312Q5 NexFET synchronous rectifier.
PMP8252 18Vdc-60Vdc Input, 3.3V @ 30A Output, 93% Efficient Active Clamp Forward | TI.com
PMP8252: The PMP8252 reference design provides 3.3V at 30A from a wide range 18V-60V telecom input with a peak efficiency that is greater than 93%. This design uses the UCC2897A active clamp controller along with Texas Instruments' NexFET power MOSFETs for synchronous rectification.
85 to 265VAC Input 5V@30W Dual Port Charger For Tablets and Smart Phones Reference Design
PMP10478: This reference design is capable of charging two devices at 2.5A each with over 82% efficiency. The UCC24610 synchronous rectifier controller and CSD17312Q5 FET reduce the rectifier loss and provide high efficiency with a minimal increase in cost. The TPS2561A provides accurate and independent current limit protection for each port. The TPS2513 communicates with the mobile device under charge to ensure that the charger is accepted by most phone and tablet models. This compact design consumes a volume of only 2.15" x 1.7" x 1.0".
PMP5711 Telecom Bus Converter for Module Replacement | TI.com
PMP5711: Highest performance, highest power 175W telecom active clamp forward, 5V @35A w/ lowest form factor
18Vdc-60Vdc Input, 3.3V @ 25A Output, 94% Efficient Active Clamp Forward
PMP6753: The PMP6753 reference design provides 3.3V at 25A from a wide range 18V-60V telecom input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller along with Texas Instruments' NexFET power MOSFETs for synchronous rectification.
Bisco Industries
分销商编号：
未知
单价:
暂无价格信息
请输入数量：
-+
库存/包装：
10
起订量：
1
递增量：
1
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
