更多产品参数
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 3333, CHIP
制造商:
PANASONIC
制造商型号:
EEEFK1C471P
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
EEEFK1C471P数据表
参考设计(17)
36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design - PMP7246.2 - TI Tool Folder
PMP7246: This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant converter). It can modulate output voltage from 20V to 32V within 200us (at maximum 200uF of capacitive load) – so called: slow drain modulation. The converter has full load steps capability as well. It is a very small design for high sophisticated telecom applications. The system can also be used for all other two quadrant applications. Input voltage range: 36VDC-60VDC; Output voltage: 20VDC…32VDC (adjustable); Output current: 12A (18Apeak).
Non-Isolated LDO for Industrial using TPS7A201 with Input of 19 VDC 18V@0.05A
PMP7115.5: The PMP7115.5(18V@0.05A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 18 volt output at 0.05 Amps from an input of 19 Volts DC. This design has multiple outputs.
Non-Isolated LDO for Industrial using TPS7A3001 with Input of 16 VDC -15V@0.05A - PMP7115.8 - TI Tool Folder
PMP7115: The PMP7115.8(-15V@0.05A) reference design is a 13.2W LDO which uses a TPS7A3001 and was intended for Industrial applications. It can generate a Non-Isolated -15 volt output at 0.05 Amps from an input of 16 Volts DC. This design has multiple outputs.
36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design
PMP7246.2: This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant converter). It can modulate output voltage from 20V to 32V within 200us (at maximum 200uF of capacitive load) – so called: slow drain modulation. The converter has full load steps capability as well. It is a very small design for high sophisticated telecom applications. The system can also be used for all other two quadrant applications. Input voltage range: 36VDC-60VDC; Output voltage: 20VDC…32VDC (adjustable); Output current: 12A (18Apeak).
Non-Isolated LDO for Industrial using TPS7A201 with Input of 19 VDC 17.2V@0.02A
PMP7115.4: The PMP7115.4(17.2V@0.02A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 17.2 volt output at 0.02 Amps from an input of 19 Volts DC. This design has multiple outputs.
Uses TPS40303 to generate 1.1V@30A output
PMP5575: High current, up to 30Amax core power supply to power DSPs, ASICs or similar out of a 5V bus, single phase w/ TPS40303
Non-Isolated LDO for Industrial using TPS7A201 with Input of 19 VDC 17.2V@0.02A
PMP7115.3: The PMP7115.3(17.2V@0.02A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 17.2 volt output at 0.02 Amps from an input of 19 Volts DC. This design has multiple outputs.
Uses TPS40303, to implement sync buck with VID
PMP5672: Universal buck converter provides up to 25A load current for DSPcores or similar w/ 4-bit VID interface, TPS40303
Isolated Flyback for Industrial using TPS40210 with Input of 12 VDC 17.2V@0.02A
PMP7115.2: The PMP7115.2(17.2V@0.02A) reference design is a 13.2W Flyback which uses a TPS40210 and was intended for Industrial applications. It can generate an Isolated 17.2 volt output at 0.02 Amps from an input of 12 Volts DC. This design has multiple outputs.
Isolated Flyback for Industrial using UCC28600 with Input of 80 to 270 VAC 12V@0.4A
PMP7115.1: The PMP7115.1(12V@0.4A) reference design is a 13.2W Flyback which uses a UCC28600 and was intended for Industrial applications. It can generate an Isolated 12 volt output at 0.4 Amps from an input ranging from 80 to 270 Volts AC. This design has multiple outputs.
Non-Isolated LDO for Industrial using TPS7A201 with Input of 16 VDC 15V@0.05A
PMP7115.7: The PMP7115.7(15V@0.05A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 15 volt output at 0.05 Amps from an input of 16 Volts DC. This design has multiple outputs.
Non-Isolated LDO for Industrial using TPS7A3001 with Input of 16 VDC -15V@0.05A
PMP7115.8: The PMP7115.8(-15V@0.05A) reference design is a 13.2W LDO which uses a TPS7A3001 and was intended for Industrial applications. It can generate a Non-Isolated -15 volt output at 0.05 Amps from an input of 16 Volts DC. This design has multiple outputs.
36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design
PMP7246.1: This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant converter). It can modulate output voltage from 20V to 32V within 200us (at maximum 200uF of capacitive load) – so called: slow drain modulation. The converter has full load steps capability as well. It is a very small design for high sophisticated telecom applications. The system can also be used for all other two quadrant applications. Input voltage range: 36VDC-60VDC; Output voltage: 20VDC…32VDC (adjustable); Output current: 12A (18Apeak).
Non-Isolated LDO for Industrial using TPS7A201 with Input of 19 VDC 17.2V@0.02A - PMP7115.4 - TI Tool Folder
PMP7115: The PMP7115.4(17.2V@0.02A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 17.2 volt output at 0.02 Amps from an input of 19 Volts DC. This design has multiple outputs.
Isolated Flyback for Industrial using TPS40210 with Input of 12 VDC 5V@0.5A
PMP7115.6: The PMP7115.6(5V@0.5A) reference design is a 13.2W Flyback which uses a TPS40210 and was intended for Industrial applications. It can generate an Isolated 5 volt output at 0.5 Amps from an input of 12 Volts DC. This design has multiple outputs.
Using TPS40210 in Sepic configuration to generate 8V @ 1.5A
PMP5724: Low cost 12W sepic provides 8V @1.5A w/ TPS40210
Ameya Holding Limited
分销商编号：
AMY-EEEFK1C471P
单价:
暂无价格信息
请输入数量：
-+
库存/包装：
1,000
起订量：
1
递增量：
1
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
