更多产品参数
Operational Amplifier, 1 Func, 100uV Offset-Max, BIPolar, PDSO6
制造商:
Texas Instruments
制造商型号:
INA213BIDCKT
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
INA213BIDCKT数据表
参考设计(22)
PMP9756 Step-Down Converter with Cable Voltage Drop Compensation Reference Design | TI.com
PMP9756: This reference design details a power management circuit which is capable to accurately regulate the output voltage at the end of a cable without using sense connections. The implementation is based on a completely integrated step down converter circuit enabling a small total solution while still capable of handling up to 3 A at the output.
PMP11282 High Efficiency 410W AC/DC Power Supply Reference Design | TI.com
PMP11282: PMP11282 is a high-efficiency AC/DC power supply reference design with universal AC input and 24V/17A output. Interleaved transition mode PFC and LLC series resonant converter is applied for 24V/17A main power. A PSR Flyback with MOSFET integrated controller is applied as the auxiliary supply. 91.98% efficiency is achieved at low line and full load. 94.61% efficiency is achieved at high line and full load.
PMP11064 High Efficiency 400W AC/DC Power Supply Reference Design | TI.com
PMP11064: PMP11064 is a high-efficiency AC/DC power supply reference design with universal AC input and 20V/20A output. Interleaved transition mode PFC and LLC series resonant converter is applied for 20V/20A main power. A PSR Flyback with MOSFET integrated controller is applied as the auxiliary supply. 91.2% efficiency is achieved at low line and full load. 93.1% efficiency is achieved at high line and full load.
DLP Ultra-mobile NIR Spectrometer for Portable Chemical Analysis with Bluetooth Connectivity
TIDA-00554: The ultra-mobile near-infrared (NIR) spectrometer reference design utilizes Texas Instruments' DLP technology in conjunction with a single-element InGaAs detector to deliver high performance measurements in a portable form factor that is more affordable than architectures using an expensive InGaAs array detector or fragile rotating grating architectures. The reference design supports Bluetooth low energy to enable mobile lab measurements for hand-held spectrometers for applications including food, agriculture, pharmaceuticals, petrochemicals, and more. Using a TI Tiva processor, databases in the cloud can be leveraged through cellular networks for real-time lab equivalent analytics, which allow food or skin analysis and wearable health monitor solutions. Developers can also create their own data collection and analysis through innovative iOS and Android applications.
TIDA-00554 DLP Ultra-mobile NIR Spectrometer for Portable Chemical Analysis with Bluetooth Connectivity | TI.com
TIDA-00554: The ultra-mobile near-infrared (NIR) spectrometer reference design utilizes Texas Instruments' DLP technology in conjunction with a single-element InGaAs detector to deliver high performance measurements in a portable form factor that is more affordable than architectures using an expensive InGaAs array detector or fragile rotating grating architectures. The reference design supports Bluetooth low energy to enable mobile lab measurements for hand-held spectrometers for applications including food, agriculture, pharmaceuticals, petrochemicals, and more. Using a TI Tiva processor, databases in the cloud can be leveraged through cellular networks for real-time lab equivalent analytics, which allow food or skin analysis and wearable health monitor solutions. Developers can also create their own data collection and analysis through innovative iOS and Android applications.
PMP10928 6-12V Input to 1.5V/1.5A Output Reference Design with CC/CV Controls | TI.com
PMP10928: The PMP10928 reference design uses the TPS5402 non-synchronous Buck controller along with INA213 current shunt monitor to achieve CC/CV control for an 1.5V/1.5A output from 6-12V input voltage. +/-5% voltage regulation in CV mode and +/-5% in CC mode is achieved in this design. It is notable that this design allow the output voltage as low as 0.4V in CC mode.
Automotive USB Charger with Linear Droop Compensation Reference Design
PMP4425: The PMP4425 reference design provides detailed data for evaluating and verifying a USB charger, which uses a USB charge controller, a buck converter and a shunt amplifier. Additionally the design demonstrates an automotive USB charging port that offers short-to-battery protection. With the help of the shunt amplifier, the design is capable of compensating for the effects on Vdroop when a smartphone / tablet is connected to the USB charger using a cable that is roughly 2-3 meters in length. Compliance wtih almost all major smartphone / tablet manufacturers is supported due to programmable current limit up to 2.1 A, BC 1.2 compliant devices are supported as well as D+/D- divider modes of 2.7V/2.7V and 1.2V.
High Efficiency 400W AC/DC Power Supply Reference Design - PMP11064.1 - TI Tool Folder
PMP11064: PMP11064 is a high-efficiency AC/DC power supply reference design with universal AC input and 20V/20A output. Interleaved transition mode PFC and LLC series resonant converter is applied for 20V/20A main power. A PSR Flyback with MOSFET integrated controller is applied as the auxiliary supply. 91.2% efficiency is achieved at low line and full load. 93.1% efficiency is achieved at high line and full load.
PMP6000 Sync Buck(x4), Buck (1V @ 25A) | TI.com
PMP6000: PMP6000 uses the UC9224 Digital Power controller with 2 outputs with up to 2 phases per output to drive the CSD96370Q5M synchronous buck power stages. It targets 12Vin applications with 2 outputs, each about 1 to 1.2V at up to 50A if both phases are populated. For each phase the INA213 current monitor is used.
5V@2.1A USB Charger Automotive Reference Design
PMP10282: This USB 3.0 charger provides 5V @ 2.1A over an automotive input range of 8V - 40V. It uses the integrated FET TPS54340 PWM Buck controller and implements cable voltage droop compensation. A TPS2546 charging port controller provides data line switching plus an integrated FET with dual current protection thresholds.
PMP10282 5V@2.1A USB Charger Automotive Reference Design | TI.com
PMP10282: This USB 3.0 charger provides 5V @ 2.1A over an automotive input range of 8V - 40V. It uses the integrated FET TPS54340 PWM Buck controller and implements cable voltage droop compensation. A TPS2546 charging port controller provides data line switching plus an integrated FET with dual current protection thresholds.
PMP11282 High Efficiency 410W AC/DC Power Supply Reference Design | TI.com
PMP11282: PMP11282 is a high-efficiency AC/DC power supply reference design with universal AC input and 24V/17A output. Interleaved transition mode PFC and LLC series resonant converter is applied for 24V/17A main power. A PSR Flyback with MOSFET integrated controller is applied as the auxiliary supply. 91.98% efficiency is achieved at low line and full load. 94.61% efficiency is achieved at high line and full load.
Current Shunt Monitor with Transient Robustness Reference Design
TIDA-00302: This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it. Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to IEC61000-4-4 and IEC61000-4-5.
PMP4425 Automotive USB Charger with Linear Droop Compensation Reference Design | TI.com
PMP4425: The PMP4425 reference design provides detailed data for evaluating and verifying a USB charger, which uses a USB charge controller, a buck converter and a shunt amplifier. Additionally the design demonstrates an automotive USB charging port that offers short-to-battery protection. With the help of the shunt amplifier, the design is capable of compensating for the effects on Vdroop when a smartphone / tablet is connected to the USB charger using a cable that is roughly 2-3 meters in length. Compliance wtih almost all major smartphone / tablet manufacturers is supported due to programmable current limit up to 2.1 A, BC 1.2 compliant devices are supported as well as D+/D- divider modes of 2.7V/2.7V and 1.2V.
Step-Down Converter with Cable Voltage Drop Compensation Reference Design
PMP9756: This reference design details a power management circuit which is capable to accurately regulate the output voltage at the end of a cable without using sense connections. The implementation is based on a completely integrated step down converter circuit enabling a small total solution while still capable of handling up to 3 A at the output.
Sync Buck(x4), Buck (1V @ 25A)
PMP6000.1: PMP6000 uses the UC9224 Digital Power controller with 2 outputs with up to 2 phases per output to drive the CSD96370Q5M synchronous buck power stages. It targets 12Vin applications with 2 outputs, each about 1 to 1.2V at up to 50A if both phases are populated. For each phase the INA213 current monitor is used.
PMP6000 Sync Buck(x4), Buck (1V @ 25A) | TI.com
PMP6000: PMP6000 uses the UC9224 Digital Power controller with 2 outputs with up to 2 phases per output to drive the CSD96370Q5M synchronous buck power stages. It targets 12Vin applications with 2 outputs, each about 1 to 1.2V at up to 50A if both phases are populated. For each phase the INA213 current monitor is used.
PMP11064 High Efficiency 400W AC/DC Power Supply Reference Design | TI.com
PMP11064: PMP11064 is a high-efficiency AC/DC power supply reference design with universal AC input and 20V/20A output. Interleaved transition mode PFC and LLC series resonant converter is applied for 20V/20A main power. A PSR Flyback with MOSFET integrated controller is applied as the auxiliary supply. 91.2% efficiency is achieved at low line and full load. 93.1% efficiency is achieved at high line and full load.
PMP11474 100W USB Type C PD Power Monitoring Dongle Reference Design | TI.com
PMP11474: The PMP11474 reference design measures the voltage and current present on a USB type C cable. Current is monitored across a 5 mΩ sense resistor by an INA213 current amplifier. Voltage is monitored by an LM321 amplifier. These measurements are processed and displayed on a small LCD screen by an MSP430.
Low-Drift Bidirectional Single-Supply Low-Side Current Sensing Reference Design
TIPD156: This Verified TI Precision Design implements a low-drift, bi-directional, low-side, single-supply current sensing solution that measures load currents from -2.5 A to +2.5 A. The output range is from 250 mV to 2.75 V, with 0 A current centered at 1.5 V. To achieve low-drift performance, the solution utilizes the INA213B and REF2030. The design’s functionality and performance were verified by fabricating a PCB and measuring results over temperature from -40 °C to 125 °C.
TIDA-00302 Current Shunt Monitor with Transient Robustness Reference Design | TI.com
TIDA-00302: This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it. Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to IEC61000-4-4 and IEC61000-4-5.
TIPD156 Low-Drift Bidirectional Single-Supply Low-Side Current Sensing Reference Design | TI.com
TIPD156: This Verified TI Precision Design implements a low-drift, bi-directional, low-side, single-supply current sensing solution that measures load currents from -2.5 A to +2.5 A. The output range is from 250 mV to 2.75 V, with 0 A current centered at 1.5 V. To achieve low-drift performance, the solution utilizes the INA213B and REF2030. The design’s functionality and performance were verified by fabricating a PCB and measuring results over temperature from -40 °C to 125 °C.
DigiKey
分销商编号：
296-38955-6-ND
交货地:
港台地区
单价:
- 阶梯 人民币价格(含税) 美元价格
- 1+ - $1.4600
- 10+ - $1.0660
- 25+ - $0.9672
- 100+ - $0.8582
请输入数量：
-+
总计:
库存/包装：
9,256
/ Digi-Reel
起订量：
1
递增量：
1
寄送至：
中国大陆境内
运费规则：
￥300.00
起订
, 查看细则
DigiKey 其它编号产品
分销商编号：
296-38955-1-ND
起订量：
1
包装方式 * 包装量：
Cut Tape * 1
单价：
$1.4600
分销商编号：
296-38955-2-ND
起订量：
250
包装方式 * 包装量：
Tape & Reel * 250
单价：
$0.8063
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
