更多产品参数
Power Field-Effect Transistor, 3.6A I(D), 600V, 2.2ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-220AB
制造商:
ISC 无锡固电
制造商型号:
IRFBC30A
符合标准:
Rohs 不符合
含铅
数据手册:
文档下载
IRFBC30A数据表
参考设计(22)
Non-Isolated LDO for Industrial using TPS7A201 with Input of 19 VDC 18V@0.05A
PMP7115.5: The PMP7115.5(18V@0.05A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 18 volt output at 0.05 Amps from an input of 19 Volts DC. This design has multiple outputs.
Non-Isolated LDO for Industrial using TPS7A3001 with Input of 16 VDC -15V@0.05A - PMP7115.8 - TI Tool Folder
PMP7115: The PMP7115.8(-15V@0.05A) reference design is a 13.2W LDO which uses a TPS7A3001 and was intended for Industrial applications. It can generate a Non-Isolated -15 volt output at 0.05 Amps from an input of 16 Volts DC. This design has multiple outputs.
85-265VACin, 24V/0.7A, 5V/0.25A
PMP5536: The PMP5536 is a quasi-resonant isolated flyback; the input voiltage is the universal range and two outputs provide 5V @ 250mA, from an LDO, and a regulated 24V @ 700mA, 2.5A peak for 30milliseconds.
Non-Isolated LDO for Industrial using TPS7A201 with Input of 19 VDC 17.2V@0.02A
PMP7115.4: The PMP7115.4(17.2V@0.02A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 17.2 volt output at 0.02 Amps from an input of 19 Volts DC. This design has multiple outputs.
Non-Isolated LDO for Industrial using TPS7A201 with Input of 19 VDC 17.2V@0.02A
PMP7115.3: The PMP7115.3(17.2V@0.02A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 17.2 volt output at 0.02 Amps from an input of 19 Volts DC. This design has multiple outputs.
13.65V@1.5A 20W with UCC28610
PMP5600: This PMP5600 is a quasi-resonant isolated flyback, starting from high line and delivering 13.65V @ 1.5A. The converter "reads" the mains frequency by means of capacitors and a small SOT-23 Mosfet. A short on a test point reduces the output voltage to 8.34V performing a battery test function
Offline 25W power supply (9V @ 1A) - PMP5554.2 - TI Tool Folder
PMP5554: The PMP5554 is a reference design for a 25W offline power supply. It can operate from a universal input voltage range (85VAC to 265VAC). It's a flyback topology with 3 output voltages.
84Vac - 265Vac input, 12V/0.3A output
PMP4684: Very simple universal line power supply, a "must" when efficiency and stand-by performance play a key role. From 85Vac to 265Vac it delivers 12V @ 0.3A.
85 -265V AC in, 24V/0.7A, 5V/0.25A AC/DC Open Frame Power Supply
PMP7148.2: This reference design is a quasi-resonant isolated flyback. The input voltage is the universal 85 - 265V AC range and two outputs provide 5V @ 250mA, from an LDO, and a regulated 24V @ 700mA, 2.5A peak for 30milliseconds, employing the UCC28600D Flyback controller.
Isolated Flyback for Industrial using TPS40210 with Input of 12 VDC 17.2V@0.02A
PMP7115.2: The PMP7115.2(17.2V@0.02A) reference design is a 13.2W Flyback which uses a TPS40210 and was intended for Industrial applications. It can generate an Isolated 17.2 volt output at 0.02 Amps from an input of 12 Volts DC. This design has multiple outputs.
Isolated Flyback for Industrial using UCC28600 with Input of 80 to 270 VAC 12V@0.4A
PMP7115.1: The PMP7115.1(12V@0.4A) reference design is a 13.2W Flyback which uses a UCC28600 and was intended for Industrial applications. It can generate an Isolated 12 volt output at 0.4 Amps from an input ranging from 80 to 270 Volts AC. This design has multiple outputs.
Non-Isolated LDO for Industrial using TPS7A201 with Input of 16 VDC 15V@0.05A
PMP7115.7: The PMP7115.7(15V@0.05A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 15 volt output at 0.05 Amps from an input of 16 Volts DC. This design has multiple outputs.
Isolated Flyback 12V@0.8A
PMP4567: Very simple "50Hz transformer" replacement, when efficiency and stand-by performance play a key role. Input voltage 162Vac to 265Vac and 12V @ 0.8A provide the typical replacement of a 10W isolation transformer.
Non-Isolated LDO for Industrial using TPS7A3001 with Input of 16 VDC -15V@0.05A
PMP7115.8: The PMP7115.8(-15V@0.05A) reference design is a 13.2W LDO which uses a TPS7A3001 and was intended for Industrial applications. It can generate a Non-Isolated -15 volt output at 0.05 Amps from an input of 16 Volts DC. This design has multiple outputs.
Offline 25W power supply (9V @ 1A)
PMP5554.2: The PMP5554 is a reference design for a 25W offline power supply. It can operate from a universal input voltage range (85VAC to 265VAC). It's a flyback topology with 3 output voltages.
Non-Isolated LDO for Industrial using TPS7A201 with Input of 19 VDC 17.2V@0.02A - PMP7115.4 - TI Tool Folder
PMP7115: The PMP7115.4(17.2V@0.02A) reference design is a 13.2W LDO which uses a TPS7A201 and was intended for Industrial applications. It can generate a Non-Isolated 17.2 volt output at 0.02 Amps from an input of 19 Volts DC. This design has multiple outputs.
Isolated Flyback for Industrial using TPS40210 with Input of 12 VDC 5V@0.5A
PMP7115.6: The PMP7115.6(5V@0.5A) reference design is a 13.2W Flyback which uses a TPS40210 and was intended for Industrial applications. It can generate an Isolated 5 volt output at 0.5 Amps from an input of 12 Volts DC. This design has multiple outputs.
Offline 25W power supply (12V @ 100mA)
PMP5554.3: The PMP5554 is a reference design for a 25W offline power supply. It can operate from a universal input voltage range (85VAC to 265VAC). It's a flyback topology with 3 output voltages.
85 -265V AC in, 24V/0.7A, 5V/0.25A AC/DC Open Frame Power Supply
PMP7148.1: This reference design is a quasi-resonant isolated flyback. The input voltage is the universal 85 - 265V AC range and two outputs provide 5V @ 250mA, from an LDO, and a regulated 24V @ 700mA, 2.5A peak for 30milliseconds, employing the UCC28600D Flyback controller.
Offline 25W power supply (15V @ 1A)
PMP5554.1: The PMP5554 is a reference design for a 25W offline power supply. It can operate from a universal input voltage range (85VAC to 265VAC). It's a flyback topology with 3 output voltages.
85 -265V AC in, 24V/0.7A, 5V/0.25A AC/DC Open Frame Power Supply - PMP7148.1 - TI Tool Folder
PMP7148: This reference design is a quasi-resonant isolated flyback. The input voltage is the universal 85 - 265V AC range and two outputs provide 5V @ 250mA, from an LDO, and a regulated 24V @ 700mA, 2.5A peak for 30milliseconds, employing the UCC28600D Flyback controller.
固电半导体
分销商编号：
ISC-IRFBC30A
单价:
暂无价格信息
请输入数量：
-+
库存/包装：
0
起订量：
1
递增量：
1,000
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
