文档下载
LM158J数据表
参考设计(60)
21V to 26V @ 4A LED Driver
PMP5715.2: The PMP5715.2 is the second block, an LLC resonant isolated stage, which takes the 410V from the PFC stage and delivers 26V @ 4A constant current, suitable for LED panel driving. The loop is closed by means of a current transformer, connected to the output windings. An open string protection is accomplished by and optocoupler and a zener diode.
PMP5652 LED driver with dimming 140V…170V@0.35A | TI.com
PMP5652: The PMP5652 combines together the cascode Flyback topology (fast startup) and the constant ON time modulation to achieve high power factor and constant current driving, suitable for LED lighting application. The input voltage is the high line and a 0…10V analog input is used as dimming control voltage.
PFC Flyback LED Converter 40V - 120V @ 0.35A
PMP4522: This active power factor correction, transition mode, isolated flyback generates a constant current of 350mA on an LED string from high line (180 to 264Vac). The output accepts a voltage range of 40 to 120V. Open LED protection (overvoltage) and safety discharge of output capacitors are implemented as well.
Flyback, Buck for Automotive (52V @ 0.04A)
PMP1941.2: A triple-output non-isolated flyback converter provides a regulated low voltage and two high voltage rails. A buck converter with an input transient voltage-clamping circuit produces a 5V rail. The addition of a dithering circuit creates spread-spectrum operation on the switching frequency to lower EMI, making this circuit suitable for automotive use.
PMP4618 33.6W PFC LED Drive | TI.com
PMP4618: The PMP4618 is a constant current LED driver, delivering 10V to 48V with a constant current of 350mA or 700mA. The output current is adjustable by means of a switch; the input voltage is the high line.
LED driver with dimming 140V…170V@0.35A
PMP5652: The PMP5652 combines together the cascode Flyback topology (fast startup) and the constant ON time modulation to achieve high power factor and constant current driving, suitable for LED lighting application. The input voltage is the high line and a 0…10V analog input is used as dimming control voltage.
Flyback, Buck for Automotive (4.5V @ 0.05A)
PMP1941.5: A TPS70501 linear regulator supplies a 4.5V output in parallel with the 5V rail. This provides a low current backup voltage when the the buck converter is disabled.
18W AC-DC Indoor LED Driver
PMP6694: The PMP6694 is 18W LED based reference design for replacing incandescent and halogen bulbs utilizing UCC28810 quasi resonant PFC flyback converter.
Boost for LED Driver +/-17V@0.35A and +/-30V@0.35A
PMP4057: This low cost LED driver can regulate 350mA into a series string of LEDs with an output of up to 30V. It can operate over a wide input range and can tolerate transients up to 30Vin making it suitable for automotive applications. Open LED protection is included.
PMP5660 Multi-Transformer 2x25V (50V@700mA) | TI.com
PMP5660: From universal input to two strings LED @ 700mA, 50V maximum per string, this PMP5660 offers high efficiency even with a two stage solution: PFC TM Boost and multi-transformer LLC resonant. A TLC555 provides a internal PWM dimming function.
Flyback, Buck for Automotive (3.7V @ 0.5A)
PMP1941.3: A triple-output non-isolated flyback converter provides a regulated low voltage and two high voltage rails. A buck converter with an input transient voltage-clamping circuit produces a 5V rail. The addition of a dithering circuit creates spread-spectrum operation on the switching frequency to lower EMI, making this circuit suitable for automotive use.
35W PFC LED Drive
PMP5526: LED flyback for High Line input, offline LED driver that provides Power factor Correction PFC
PMP4501 LED driver 48V@0.7A | TI.com
PMP4501: The PMP4501 is a constant current LED driver, delivering 10V to 48V with a constant current of 700mA. The output current is adjustable with a single resistor; the input voltage is the high line.
PMP5732 LED Driver for Area Light | TI.com
PMP5732: The PMP5732 is a LED driver for area light. It can operate from an input voltage range (100VAC to 277VAC). It's a flyback topology with analog dimming.
18Vdc-57Vdc Input Isolated Battery Charger 29V @ 3A
PMP4963: The PMP4963 reference design uses the TPS40210 PWM controller in a flyback configuration to supply 3A of charge current at over 90% efficiency. The output voltage is limited by the control circuitry to 29.4V.
PMP1941 Flyback, Buck for Automotive (4.5V @ 0.05A) | TI.com
PMP1941: A triple-output non-isolated flyback converter provides a regulated low voltage and two high voltage rails. A buck converter with an input transient voltage-clamping circuit produces a 5V rail. The addition of a dithering circuit creates spread-spectrum operation on the switching frequency to lower EMI, making this circuit suitable for automotive use.
33.6W PFC LED Drive
PMP4618: The PMP4618 is a constant current LED driver, delivering 10V to 48V with a constant current of 350mA or 700mA. The output current is adjustable by means of a switch; the input voltage is the high line.
LED Buck-Boost Converter
PMP2501: Dimmable DC/DC LED driver (inverting buck-boost) for AVAGO MJ50 or similar LED strings up to 300mA load
PMP4715 28V @ 1.4A PFC Flyback | TI.com
PMP4715: The PMP4715 is a constant current LED driver, including the PFC function, delivering 12V to 28V with a constant current of 1.4A. The input voltage is the high line.
50W PFC LED Drive Transition Mode Flyback
PMP2698: This active power factor correction, transition mode, isolated flyback generates a constant current of 3.5A on an LED string from high line (180 to 264Vac). The output accepts a voltage range of 8 to 28V. The open LED protection (overvoltage) is set to 27V maximum.
17V to 36Vin Isolated Flyback 53V @ 70W
PMP5651: This DC/DC converter is an isolated Flyback delivering 53V @ 1.35A from 17V to 36V input voltage. A supplementary overvoltage protection with a further optocoupler has been implemented.
PMP6694 18W AC-DC Indoor LED Driver | TI.com
PMP6694: The PMP6694 is 18W LED based reference design for replacing incandescent and halogen bulbs utilizing UCC28810 quasi resonant PFC flyback converter.
25V @ 2A PFC Flyback
PMP5560: The PMP5560 is a constant current LED driver, including the PFC function, delivering 12V to 25V with a constant current of 2A. The input voltage is the high line.
PMP5651 17V to 36Vin Isolated Flyback 53V @ 70W | TI.com
PMP5651: This DC/DC converter is an isolated Flyback delivering 53V @ 1.35A from 17V to 36V input voltage. A supplementary overvoltage protection with a further optocoupler has been implemented.
Flyback, Buck for Automotive (5V @ 0.5A)
PMP1941.4: A low cost TPS40200 buck converter produces a 5V @ 0.5A output. The input voltage is clamped to 30V max with the addition of a transient voltage-clamping circuit. A dithering circuit creates spread-spectrum operation on the switching frequency to lower EMI, making this circuit suitable for automotive use.
Flyback, Buck for Automotive (82V @ 0.03A)
PMP1941.1: A triple-output non-isolated flyback converter provides a regulated low voltage and two high voltage rails. A buck converter with an input transient voltage-clamping circuit produces a 5V rail. The addition of a dithering circuit creates spread-spectrum operation on the switching frequency to lower EMI, making this circuit suitable for automotive use.
LED Driver for Area Light
PMP5732: The PMP5732 is a LED driver for area light. It can operate from an input voltage range (100VAC to 277VAC). It's a flyback topology with analog dimming.
PMP2501 LED Buck-Boost Converter | TI.com
PMP2501: Dimmable DC/DC LED driver (inverting buck-boost) for AVAGO MJ50 or similar LED strings up to 300mA load
LED driver 48V@0.7A
PMP4501: The PMP4501 is a constant current LED driver, delivering 10V to 48V with a constant current of 700mA. The output current is adjustable with a single resistor; the input voltage is the high line.
Flyback, Buck for Automotive (82V @ 0.03A) - PMP1941.1 - TI Tool Folder
PMP1941: A triple-output non-isolated flyback converter provides a regulated low voltage and two high voltage rails. A buck converter with an input transient voltage-clamping circuit produces a 5V rail. The addition of a dithering circuit creates spread-spectrum operation on the switching frequency to lower EMI, making this circuit suitable for automotive use.
PMP4057 Boost for LED Driver +/-17V@0.35A and +/-30V@0.35A | TI.com
PMP4057: This low cost LED driver can regulate 350mA into a series string of LEDs with an output of up to 30V. It can operate over a wide input range and can tolerate transients up to 30Vin making it suitable for automotive applications. Open LED protection is included.
PMP5660 Multi-Transformer 2x25V (50V@700mA) | TI.com
PMP5660: From universal input to two strings LED @ 700mA, 50V maximum per string, this PMP5660 offers high efficiency even with a two stage solution: PFC TM Boost and multi-transformer LLC resonant. A TLC555 provides a internal PWM dimming function.
PMP5526 35W PFC LED Drive | TI.com
PMP5526: LED flyback for High Line input, offline LED driver that provides Power factor Correction PFC
Flyback, Buck for Automotive (4.5V @ 0.05A) - PMP1941.5 - TI Tool Folder
PMP1941: A TPS70501 linear regulator supplies a 4.5V output in parallel with the 5V rail. This provides a low current backup voltage when the the buck converter is disabled.
PMP4522 PFC Flyback LED Converter 40V - 120V @ 0.35A | TI.com
PMP4522: This active power factor correction, transition mode, isolated flyback generates a constant current of 350mA on an LED string from high line (180 to 264Vac). The output accepts a voltage range of 40 to 120V. Open LED protection (overvoltage) and safety discharge of output capacitors are implemented as well.
28V @ 1.4A PFC Flyback
PMP4715: The PMP4715 is a constant current LED driver, including the PFC function, delivering 12V to 28V with a constant current of 1.4A. The input voltage is the high line.
PMP4963 18Vdc-57Vdc Input Isolated Battery Charger 29V @ 3A | TI.com
PMP4963: The PMP4963 reference design uses the TPS40210 PWM controller in a flyback configuration to supply 3A of charge current at over 90% efficiency. The output voltage is limited by the control circuitry to 29.4V.
PMP5560 25V @ 2A PFC Flyback | TI.com
PMP5560: The PMP5560 is a constant current LED driver, including the PFC function, delivering 12V to 25V with a constant current of 2A. The input voltage is the high line.
PMP2698 50W PFC LED Drive Transition Mode Flyback | TI.com
PMP2698: This active power factor correction, transition mode, isolated flyback generates a constant current of 3.5A on an LED string from high line (180 to 264Vac). The output accepts a voltage range of 8 to 28V. The open LED protection (overvoltage) is set to 27V maximum.
PMP1941 Flyback, Buck for Automotive (4.5V @ 0.05A) | TI.com
PMP1941: A triple-output non-isolated flyback converter provides a regulated low voltage and two high voltage rails. A buck converter with an input transient voltage-clamping circuit produces a 5V rail. The addition of a dithering circuit creates spread-spectrum operation on the switching frequency to lower EMI, making this circuit suitable for automotive use.
