更多产品参数
Switching Regulator, Current-mode, 3A, 2200kHz Switching Freq-Max, PDSO8
制造商:
Texas Instruments
制造商型号:
LMR23630ADDAR
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
LMR23630ADDAR数据表
参考设计(3)
PMP10745 Dual 5V Output USB Charging Reference Design Using Two LMR23630 DC/DC Synchronous Buck Converters | TI.com
PMP10745: The PMP10745 is a dual output DC/DC Buck converter power supply reference design for USB charging applications. It takes a 7V to 36V input voltage, and generates two 5V at 3A outputs with 96% peak efficiency. The reference design features two LMR23630 buck converters to provide two very stable and well-regulated outputs. The board dimension is 66 x 58 mm (2.6 x 2.3 inch), but the solution size is 46 x 38 mm (1.8 x 1.5 inch). The reference design uses an EMI filter at the input and the board is layout-optimized for improved EMI performance, which results in compliance with the CISPR 25 Class 5 conducted emissions standard.
PMP15016 CISPR-22 EMI-Optimized Reference Design Featuring LMR23630 Synchronous DC/DC Buck Converter | TI.com
PMP15016: The PMP15016 reference design is a 5V/3A output power supply using the LMR23630 DC/DC buck regulator IC. This design uses a 4-layer board and is intended for industrial applications with a 24V input bus. LMR23630 is a 4.0V to 36V input, 3A output capable, and 400 kHz fixed synchronous buck regulator. This reference design has an input voltage range of 9V to 36V, covering the widely-varying input voltage condition commonly seen in industrial applications with a loosely-regulated nominal 24V input voltage. The reference board includes an input EMI filter section. The layout is optimized for improved EMI performance on a 4-layer PCB. The board was tested to the CISPR-22 standard. The conducted emissions (CE) and radiated emissions (RE) are in compliance with the CISPR-22 Class-B requirement with 10dB of margin.
PMP11668 Single USB Car Charger with Cable Compensation and Battery Short Protection Reference Design | TI.com
PMP11668: The PMP11668 reference design is a single channel USB charger for automotive application. It includes a buck converter followed by a USB charging port controller. Its built-in short-to-battery protection, IEC ESD protection features enhance the system's reliability significantly in automotive application. This design can also handle a 2.1A load current using a simple two layer design. Its output port supports the USB BC1.2 CDP charging protocol.
DigiKey
分销商编号：
296-47270-6-ND
交货地:
港台地区
单价:
- 阶梯 人民币价格(含税) 美元价格
- 1+ - $4.1000
- 10+ - $3.1020
- 25+ - $2.8516
- 100+ - $2.5764
- 250+ - $2.4450
- 500+ - $2.4327
请输入数量：
-+
总计:
库存/包装：
2,329
/ Digi-Reel
起订量：
1
递增量：
1
寄送至：
中国大陆境内
运费规则：
￥300.00
起订
, 查看细则
DigiKey 其它编号产品
分销商编号：
296-47270-1-ND
起订量：
1
包装方式 * 包装量：
Cut Tape * 1
单价：
$4.1000
分销商编号：
296-47270-2-ND
起订量：
2,500
包装方式 * 包装量：
Tape & Reel * 2,500
单价：
$2.2320
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
