更多产品参数
Small Signal Bipolar Transistor, 0.6A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon, SOT-23, 3 PIN
制造商:
ACTIVE COMPNTS/DIODES
制造商型号:
MMBT2907
符合标准:
未知
数据手册:
文档下载
MMBT2907数据表
参考设计(95)
38Vdc-60Vdc Input, 6V @ 20A Output, Active Clamp Forward
PMP4074: The PMP4074 reference design provides 6V at 120W from a 48V telecom input with 94% efficiency. This design uses the UCC2897A active clamp controller along with self-driven synchronous rectifiers. This design includes a remote sense function for improved voltage regulation at the point of load.
High Resolution, Portable Light Steering Reference Design using DLP Technology
DLP4500-C350REF: This reference design, featuring the DLP® 0.45” WXGA chipset and implemented in the DLP® LightCrafter™ 4500 evaluation module (EVM), enables flexible control of high resolution, accurate patterns for industrial, medical, and scientific applications. With a free USB-based GUI and API, developers can easily integrate TI’s innovative digital micromirror device (DMD) technology with cameras, sensors, motors, and other peripherals to create highly differentiated 3D machine vision systems, 3D printers, and augmented reality displays.
Digitally controlled power multiplexing and monitoring system
PMP5927: PMP5927 is an I2C controlled 1:7 Power Mux and Monitoring System for DC distribution systems from 9 to 80 V. It is well suited for distributing power to TMAs (Tower Mounted Antennas), LED Arrays, and other DC systems needing sequencing, circuit protection, and monitoring via an I2C interface. With the built in USB to I2C converter, the PMP5927 can be easily used with only a USB to Mini USB cable and the downloadable GUI.
High Efficiency Forward Converter (12V@7A) for PoE Powered Device (PD)
PMP5124: The PMP5124 reference design provides 12V at 7A from a 48V telecom input with greater than 95% efficiency. This design uses the UCC2897A active clamp controller with self-driven synchronous rectifiers to achieve very high efficiency.
Boost (15V@1A) for Audio Applications - PMP5859.2 - TI Tool Folder
PMP5859: This efficient, low cost boost converter provides a positive 15V@1A output from a 5V input. The large output capacitance make this suitable for applications with a large transient load, such as audio.
310W PSU Using Transition Mode Bridgeless PFC and LLC-SRC - Reference Design
PMP9640: High efficiency, high power factor and reliable power supply are the main focus of the PMP9640 design for motor driver applications. Low cost analog transition mode (TM) PFC controller UCC28051 has been used for bridgeless PFC as the first conversion stage of the PMP9640. LLC series resonant converter (SRC) with UCC25600 is applied as the second stage of the PMP9640. In addition, a high-side buck converter with UCC28710 is applied here as the bias supply. In this design, bridgeless PFC efficiency can go up to 98.5%.
18Vdc-60Vdc Input, 3.3V @ 30A Output, 93% Efficient Active Clamp Forward
PMP8252: The PMP8252 reference design provides 3.3V at 30A from a wide range 18V-60V telecom input with a peak efficiency that is greater than 93%. This design uses the UCC2897A active clamp controller along with Texas Instruments' NexFET power MOSFETs for synchronous rectification.
TPS40210, 26V SEPIC
PMP5657.2: Two sepics, 12Vout and 26Vout, both w/ TPS40210, to deal with wide input voltage range 10Vdc to 32Vdc
100VAC-265VAC 100W High Bay LED Lighting (80V @ 350mA)
PMP4862.2: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
36VDC - 75VDC Input, 80V@0.5A Output Isolated Flyback and Synchronous Buck
PMP4113.1: This reference design uses the UCC2809 to control an isolated flyback that converts a standard 48V telecom input to an isolated 80V. An additional winding on the secondary of the flyback transformer generates an unregulated 12V rail. The TPS40193 controls a synchronous buck that generates a 3.3V/3A output from this 12V rail. The total end-to-end efficiency of this design is over 90%.
Universal AC DLP Power Supply (10V @ 6A) - PMP5500.2 - TI Tool Folder
PMP5500: This reference design provides 400W of power from a universal AC input with power factor correction. The UCC28019A controls a PFC boost front end, while the UCC25600 LLC resonant-half bridge converts the PFC output to isolated 40V, 33V, and 27V outputs. The total system efficiency is over 89% with a 230VAC input and over 85% with an 115VAC input.
Offline AC/DC 77W Quasi-Resonant Flyback Converter Reference Design
PMP10121: The PMP10121 reference design uses the UCC28600 quasi-resonant flyback controller to generate 22V @ 3.5A from an AC input. This flyback converter is not isolated and no optocoupler is needed for regulation.
Universal AC DLP Power Supply (10V @ 6A)
PMP5500.2: This reference design provides 400W of power from a universal AC input with power factor correction. The UCC28019A controls a PFC boost front end, while the UCC25600 LLC resonant-half bridge converts the PFC output to isolated 40V, 33V, and 27V outputs. The total system efficiency is over 89% with a 230VAC input and over 85% with an 115VAC input.
36V-75VDC Input, 12V/10A Active Clamp Forward, 1/8th Brick Form Factor
PMP7451: This reference design generates a 12V/10A output from a standard 48V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD18531Q5A, implemented as self-driven synchronous rectifiers, provide for a highly efficient design. This design is laid out in a standard 1/8th brick footprint and includes enable, remote sense, and output overvoltage features.
Boost (15V@1A) for Audio Applications
PMP5859.2: This efficient, low cost boost converter provides a positive 15V@1A output from a 5V input. The large output capacitance make this suitable for applications with a large transient load, such as audio.
Ultra-Wide Input Voltage Range PSR Flyback Converter Reference Design
PMP10200: The PMP10200 reference design uses the UCC28700 primary-side regulated quasi-resonant flyback controller to generate a 28V output from an DC input. The input voltage range is between 25VDC and 520VDC. It is a low cost solution because no optocoupler is needed to regulate the output voltage.
36VDC - 75VDC Input, 3.3V@3A Output Isolated Flyback and Synchronous Buck
PMP4113.2: This reference design uses the UCC2809 to control an isolated flyback that converts a standard 48V telecom input to an isolated 80V. An additional winding on the secondary of the flyback transformer generates an unregulated 12V rail. The TPS40193 controls a synchronous buck that generates a 3.3V/3A output from this 12V rail. The total end-to-end efficiency of this design is over 90%.
18V-60V Input, 12V@10A Active Clamp Forward
PMP6547: This reference design provides 12V at 10A from a wide range 18V-60V telecom input with greater than 93% efficiency. This design uses the UCC2897A active clamp controller with synchronous rectifiers for an efficient, yet cost effective solution that can operate from either a 24VDC or 48VDC input bus.
220V-400VDC Input, 12V/160W Active Clamp Forward
PMP7410: This reference design generates an isolated 12V/160W output from a high voltage DC input. This design is intended to operate from the output of PFC front end regulator. The UCC2897A is used to control an active clamp forward converter. Texas Instruments CSD18531Q5A synchronous rectifiers allow this design to achieve over 92% efficiency. An accurate current limit is provided by directly sensing the output current. A clock pulse output is also provided for synchronizing with other converters.
18V-30V Input 24V@6.25A Active Clamp Forward Reference Design
PMP8944: This reference design provides a regulated and isolated 24Vdc at 150W from an 18Vdc-60Vdc input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller with synchronous rectifiers for an efficient, yet cost effective solution.
85VAC-265VAC Input, 12V/3A Output Green-Mode Synchronous Flyback
PMP4820: The PMP4820 reference design use the UCC28600 green-mode controller with a synchronous rectifier to provide good efficiency at heavy loads while maintaining low power consumption at light loads. The maximum load efficiency is over 87%, and the no load losses are less than 150mW.
Class 4 High-Efficiency Driven Flyback Converter (5V/5A) for PoE PD Applications Reference Design
TIDA-00617: The TIDA-00617 reference design uses the TPS23751 PoE PD controller in a high effciency (driven) synch flyback converter capable of 5V at 5A.
10Vdc-100Vdc Input, 12V/1A SEPIC converter
PMP6545: This reference design uses the TPS40210 current mode controller in a SEPIC converter to generate a 12V/1A output from a wide 10V - 100V DC input.
335W Single Stage LLC-SRC Converter Reference Design - PMP10375.2 - TI Tool Folder
PMP10375: The PMP10375 reference design is a single stage LLC series resonant converter (SRC), producing up to a 335W output using UCC25600 resonant controller. With the use of single stage LLC-SRC, the converter efficiency goes up to 90% at 335W full output power with 120VAC input.
Boost 55V@0.48A for LCD TV LED Backlighting
PMP5299: This 25W discontinuous current-mode boost converter provides a low ripple voltage of less than 1% and efficiency of greater than 94% at 24V input. Aluminum output caps are utilized, ensuring excellent load transient capability. An external control voltage allows the user to adjust the output voltage by +/-10%.
PSR Flyback using UCC28710 for Universal 85-265VAC Input with 12V/60W Rated Output Reference Design
PMP10350: This design uses the PSR controller UCC28710 for a 12V/60W DCM Flyback converter. The valley switching of the UCC28710 allows this low-cost design to achieve a maximum load efficiency of 84.3% at 120VAC/60Hz input and 86% at 230VAC/50Hz input.
14V-35V Input, 12V/7A5, 5V/100mA, Active Clamp
PMP5549: This Active clamp Forward supplies two outputs, 12V @ 7.5A and 5V @ 100mA, with a LDO, starting from a 14V…35V input source, reaching 94% efficiency with sync. Rectification.
Laser and Ionization Unit
PMP2534: The PMP2534 is composed of two times active clamp forward, delivering 0…35V@10Amax, two current limit functions to protect the 3.3V and 5V outputs and some interface for a microcntroller. The active clamps are constant voltage and/or constant current controllable by means of two PWM inputs. This power supply is suitable as general bench power generator from a desktop standard PSU as source.
18Vdc-36Vdc Input, 28V/100W Active Clamp Forward
PMP7294: This reference design uses the UCC2897A active clamp controller to generate an isolated 28V/3.6A output from a standard 24Vdc telecom input. This design uses diode rectification on the output stage and achieves efficiencies up to 93%. The output is adjustable down to 24V by changing a single resistor value.
LED driver 16.8V@2.6A
PMP4531: high power 2.6A LED driver (sepic) for up to four LEDs P7 out of 12V to 24V input
195VAC - 265VAC in, 4.5V@ 4.5A out
PMP5512: The "cascode" topology associated to a quasi-resonant isolated Flyback and synchronous rectification on output allow this converter to show small form factor and high performance. From high line input to 4.5V @ 4.5A.
36V-75VDC Input, 5V/20A Active Clamp Forward, 1/8th Brick Form Factor
PMP8366: This reference design generates a 5V/20A output from a standard 48V telecom input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD17312Q5, implemented as self-driven synchronous rectifiers, provide for a highly efficient design. This design is laid out in a standard 1/8th brick footprint and includes enable, remote sense, and output overvoltage features.
100VAC-265VAC 100W High Bay LED Lighting (80V @ 350mA)
PMP4862.4: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
24V@3A Sepic
PMP4608: This Sepic converter supplies 24V, 60W output power from 16V…43Vin. A damping network has been added to the Sepic ceramic capacitor in order to improve the stability in all conditions.
18Vdc-60Vdc Input, 9.6V @ 15A Output, 94% Efficient Active Clamp Forward
PMP6933: The PMP6933 reference design provides 9.6V at 15.6A (150W) from a wide range 18V-60V telecom input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller with self-driven synchronous rectifiers to achieve high efficiency.
SEPIC 200V@400mA
PMP5143: This high voltage SEPIC converter provides a regulated 200V output from a 200V input and achieves efficiency as high as 96%. Possible applications include televisions, telecom and industrial.
TPS40210 60W SEPIC
PMP4700: 60W Sepic configuration, 20V @3A output
High Efficiency 100W Active Clamp Forward 220V-400VDC Input, 28V/ 3.6A Reference Design
PMP7453: This reference design generates an isolated 28V/100W output from a high voltage DC input. This design is intended to operate from the output of PFC front end regulator. The UCC2897A is used to control an active clamp forward converter. Self-driven synchronous rectifiers allow for over 92% efficiency. An accurate current limit is provided by directly sensing the output current. A clock pulse output is also provided for synchronizing with other converters.
Universal Line, 5V/1A
PMP4573: A standard universal line to 5V @ 1A power supply finds typical application in USB supply. Green mode operation and sycnhronous rectification allow high efficiency and low cost.
Direct Type/ Local Dimming (Conventional TV power + Boost + LED driver)
PMP4298: In this topology, the UCC28051 is a boost transition mode (TM) power factor corrector (PFC), which can rectify an AC input line voltage to 380V DC; the resonant LLC stage UCC25600 regulates the output to 24V/2A for an audio amplifier with feedback to the LLC controller, and 48V for the LED driver input. The flyback with UCC28610 in parallel generates 5V/3A for the system board and 5V/1A for standby power. In the LED driver stage, the 48V input voltage requires another front end boost stage to boost the output voltage to 80V, which connects to the eight-channel TLC5960 with 20LEDs at 120mA per string.This technique is the most common type of current LED backlight; the LLC design is easily implemented. The intelligent headroom voltage monitor (oriHVM™) automatically minimizes the power loss caused by the LED forward voltage change. Only a single additional resistor regulates the boost dc-dc output voltage.
100VAC-265VAC 100W High Bay LED Lighting (100V @ 1.2A)
PMP4862.1: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
36VDC - 75VDC Input, 80V@0.5A Output Isolated Flyback and Synchronous Buck - PMP4113.1 - TI Tool Folder
PMP4113: This reference design uses the UCC2809 to control an isolated flyback that converts a standard 48V telecom input to an isolated 80V. An additional winding on the secondary of the flyback transformer generates an unregulated 12V rail. The TPS40193 controls a synchronous buck that generates a 3.3V/3A output from this 12V rail. The total end-to-end efficiency of this design is over 90%.
Boost 48V@6A
PMP4540: 200W single stage boost converter, 48V @ 4A out of 24V input
335W Single Stage LLC-SRC Converter Reference Design
PMP10375.1: The PMP10375 reference design is a single stage LLC series resonant converter (SRC), producing up to a 335W output using UCC25600 resonant controller. With the use of single stage LLC-SRC, the converter efficiency goes up to 90% at 335W full output power with 120VAC input.
195VAC - 265VAC in, 4.5V@ 4.5A out
PMP5563: The "cascode" topology associated to a quasi-resonant isolated Flyback and synchronous rectification on output allow this converter to show small form factor and high performance. From high line input to 4.5V @ 4.5A.
150VAC-264VAC Input, 100W SEPIC-PFC LED
PMP3976: The PMP3976 reference design uses the UCC28810 in a single-stage, PFC-SEPIC configuration to drive a 100W LED load. This supply can operate from an input ranging from 150VAC up to 264VAC. It is capable of driving LED strings from 250V up to 300V at a fixed current of 0.35A with efficiency over 90%.
Negative 48Vin, 3.3V @ 14A out
PMP4523: This is a tiny isolated active clamp forward converter for telecom use, output 3.3V @14A with simply direct driven secondary gate control.
85VAC-265VAC Input, 24V@0.1A Non-Isolated Flyback
PMP4043: This reference design uses the UCC28600 quasi-resonant flyback controller to generate a 24V/0.1A output from a universal AC input source. This flyback converter is not isolated. Three transistors are used in place of an opto-coupler to reduce the overall BOM cost.
Isolated Flyback that generates - 48 Vin, 20Vout at 3A
PMP4696: 60W isolated telecom flyback, 20V @3A
350W PSU with Universal AC Input and 28V Output - Reference Design
PMP9531: High efficiency, high power factor and reliable power supply are the main focus of the PMP9531 design for motor driver applications. Transition mode (TM) power factor correction (PFC) with UCC28051 and LLC series resonant converter (SRC) with UCC25600 are applied in PMP9531. In addition, a high-side buck converter with UCC28710 is applied here as the bias supply. 93% converter efficiency is achieved at high line while still obtaining 90% converter efficiency at low line.
High-power (250-W) boost DC-DC solution for 48-V output Industrial and Telecom applications
PMP7118: This high power step-up DC-DC employs a controller with a low gate charge external MOSFET to supply 48V output for loads up to 250 W from a 24-V source.
Wide input voltage range SEPIC (12V @ 1A)
PMP8313: This SEPIC converter provides 12W (12V at 1A) over an input voltage range of 8V to 48V. PMP8313 uses the TPS40210 current mode boost converter.
18V-75V Input, 12V@12A Active Clamp Forward
PMP8380: This reference design provides 12V at 12A from a wide range 18V-75V telecom input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller with synchronous rectifiers for an efficient, yet cost effective solution that can operate from either a 24VDC or 48VDC input bus.
8V-36V Input 12V/7A; Active Clamp Forward Reference Design
PMP5123: This reference design generates an isolated 12V/7A output from an 8V to 36V DC input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD19533Q5A and CSD19534Q5A allow this design to achieve a max load efficiency over 93%, with a peak efficiency of over 94%. The compact UCC27511 drivers simplify the gate drive circuitry for the synchronous rectifiers.
PFC SEPIC (208V@0.110A Non-isolated LED String) for OLED Lighting
PMP5242: The PMP5242 reference design uses the UCC28810 in a single-stage, PFC-SEPIC configuration to drive a 22W LED load. This supply can operate from an input ranging from 85VAC up to 265VAC. It is capable of driving LED strings from 156V up to 208V at a fixed current of 110mA with efficiency over 89%.
250W Single Stage LLC-SRC Converter Reference Design
PMP9739: The PMP9739 is a single stage LLC series resonant converter (SRC), producing up to a 250W output using UCC25600 resonant controller. With the use of single stage LLC-SRC, the converter efficiency goes up to 89% at 250W full output power.
400VDCin, 12V@460W, LLC with Synchronous Rectifiers
PMP5967: The PMP5967 reference design provides a 12V/38A output with over 94% efficiency from a 380VDC input. This design uses the UCC25600 to control the resonant LLC converter. The UCC24610 synchronous rectifier controller is used to control two banks of CSD18501Q5A MOSFETs, eliminating the need for heat sinks on the output rectifiers.
36VDC-72VDC Input, 5V/36A Interleaved Active Clamp Forward
PMP4016: This reference design generates a 5V/36A output from a standard 48V telecom input. Two UCC2891controllers are configured to control two interleaved active-clamp forward power stages. The secondary circuitry implements self-driven synchronous rectifiers for a highly efficient design. Splitting the power into two paralleled power stages reduces conduction losses and allows this design to achieve efficiencies greater than 94 percent.
100VAC-265VAC 100W High Bay LED Lighting (80V @ 350mA)
PMP4862.3: The PMP4862 reference design drives three separate LED strings (up to 77V) at 350mA from a universal AC input. The UCC28810 is used in a PFC-Flyback configuration to provide power factor correction and isolation at the same time. Each LED driver uses one TPS40210 to control the individual LED current. PWM dimming, ON/OFF control, current monitoring, and a trim function are all provided for each individual LED string. The PFC-flyback is over 87% efficient, while the buck LED drivers are over 92% efficient. The overall efficiency is over 80%.
Buck (-15V@1A) for Audio Applications
PMP5859.3: This efficient, low cost sepic converter provides a -15V@1A output from a 5V input. The large output capacitance make this suitable for applications with a large transient load, such as audio.
335W Single Stage LLC-SRC Converter Reference Design
PMP10375.2: The PMP10375 reference design is a single stage LLC series resonant converter (SRC), producing up to a 335W output using UCC25600 resonant controller. With the use of single stage LLC-SRC, the converter efficiency goes up to 90% at 335W full output power with 120VAC input.
36VDC-72VDC Input, 5V/60A Interleaved Active Clamp Forward
PMP2214: This reference design generates a 5V/60A output from a standard 48V telecom input. Two UCC2891controllers are configured to control two interleaved active-clamp forward power stages. The secondary circuitry implements self-driven synchronous rectifiers for a highly efficient design. This design includes trimming, remote sense, and output overvoltage features.
36V-72V Input 3.3V/15A 92% Efficient Active Clamp Forward
PMP5454: The PMP5454 reference design provides 3.3V at 50W (15A) from a standard 48V telecom input with greater than 92% efficiency. This design uses the UCC2897A active clamp controller along with TI CSD16414Q5 NexFET synchronous rectifiers. All components of this design fit within a 2.3" by 0.9" (1/8 brick) area of the circuit board.
Single Stage 200W AC-DC LLC Series Resonant Conv for 120VAC & 230VAC Input Reference Design
PMP10283: The PMP10283 reference design provides 30V/100W and -30V/100W outputs from AC line voltage to a single LLC resonant converter stage. This design is featured with its low circuit cost and high efficiency (over 90% @ 120VAC full load and ~92% @ 240VAC full load). This design uses the UCC25600 resonant converter controller for LLC resonant converter.
Low-Line Wide Input LLC Resonant Conv for Consumer Electronics (12V@10A) Reference Design
PMP8762: The PMP8762 reference design provides a 12V/10A output from a low line-input voltage (100Vac to 132Vac) with a single LLC resonant converter stage. This design is featured with its low circuit cost, low electromagnetic interference (both conduction and radiation), and high efficiency (over 87% @ full load). This design uses the UCC25600 resonant converter controller along with UCC27702 high side gate driver to control the LLC resonant converter.
36VDC-75VDC Input, 3.3V/30A 1/8th Brick Active Clamp Forward
PMP4234: This reference design generates an isolated 3.3V/10A output from a standard 48V telecom bus input. The UCC2897A is used to control an active clamp forward topology with self-driven synchronous rectifiers. The electrical components fit into the area of a standard 1/8th brick footprint. Peak efficiency is over 92%.
SEPIC 19V@4.7A
PMP5064: This SEPIC converter delivers 89W of power from a 9V – 33V input and achieves an efficiency of 90%. Possible applications include automotive, security and industrial.
Universal LED Front Light for Automotive Applications
PMP5518: This reference design is an universal LED driver in which the LED current is adjustable via 4-bit IID interface. The Sepic is has a range of the following three parameters: max. 20W, max. 60V output voltage (string voltage, so less than 15LEDs), max. 1.4A LED current. The reference design has a wide input voltage from 6V to 19V.
Universal AC Input, 10.5V/1.8A DC Output, Isolated Synchronous Flyback Converter Reference Design
PMP10164: The PMP10164 reference design supplies 10.5V@1.8A from universal AC mains; the isolated Flyback topology is the most used for low power range due to single magnetic component. Since the load is a power line communication chip, a fixed frequency modulation has been chosen. The controller LM5021 performs also pulse skip mode thus improving efficiency at light load. A synchronous rectification controller UCC24630 has been employed to increase the efficiency and the thermal performance.
SEPIC 16V@4A for Automotive
PMP5319: This SEPIC converter provides a regulated 16V output from a 8V – 32V input and achieves an efficiency as high as 93%. Possible applications include automotive, chargers, and industrial.
95VAC-305VAC 460W Interleaved TM PFC
PMP5194: The PMP5194 reference design uses the UCC28061 interleaved transition mode PFC controller to convert a universal AC input to a 460V/1A DC bus. This design achieves a peak efficiency of over 96%.
18Vdc-60Vdc Input, 3.3V @ 25A Output, 94% Efficient Active Clamp Forward
PMP6753: The PMP6753 reference design provides 3.3V at 25A from a wide range 18V-60V telecom input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller along with Texas Instruments' NexFET power MOSFETs for synchronous rectification.
Synchronous Flyback with High Line (195 to 265Vac) Input to 13V@1.6A Output with Low Standby Current
PMP5734: The PMP5734 is a sync Flyback converter with discrete driver for the sync FET. The UCC28610 controller features low standby current and fast startup time. PMP5734 was built on the PMP5512 Rev_A PWB.
18Vdc-30Vdc Input, 20V @ 4.5A Output, 94% Efficient Active Clamp Forward
PMP6797: The PMP6797 reference design provides an isolated 20V at 4.5A from an 18V-30V input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller with self-driven synchronous rectifiers.
PFC Boost LLC Resonant Half-bridge 24V@3.5A
PMP5761: PMP5761 is designed for hybrid filber/coax system with nominal 40VAC-90VAC input and generate a 24V/3.5A output. A cascade PFC and LLC-SRC two stage system is applied in this design to guarantee high power factor is achieved in nominal input range. Transition mode PFC controller UCC28051 and resonant converter controller UCC25600 are applied to PFC and LLC-SRC, respectively. With PFC output set to 300V, PMP5761 is able to keep out in regulation with input up to 200VAC. 80% converter efficiency is achieved at 40VAC and 87% converter efficiency is achieved at 115VAC.
220V-400VDC Input, 5V/100W Active Clamp Forward
PMP7413: This reference design generates an isolated 5V/100W output from a high voltage DC input. This design is intended to operate from the output of a PFC front end regulator. The UCC2897A is used to control an active clamp forward converter. Self-driven synchronous rectifiers allow for 91% efficiency. An accurate current limit is provided by directly sensing the output current. A clock pulse output is also provided for synchronizing with other converters.
52V-60Vdc Input, 12V/22A Active Clamp Forward
PMP7376: This reference design generates a 12V/21.7A output from 54V DC input. The UCC2897A controls an active clamp forward converter power stage. The low gate charge and low RDSon of the CSD18531Q5A, implemented as self-driven synchronous rectifiers, allow this design to achieve a max load efficiency of nearly 95%.
220V-400VDC Input, 12V/100W Active Clamp Forward
PMP6961: This reference design generates an isolated 12V/100W output from a high voltage DC input. This design is intended to operate from the output of a PFC front end regulator. The UCC2897A is used to control an active clamp forward converter. Self-driven synchronous rectifiers allow for over 91% efficiency. An accurate current limit is provided by directly sensing the output current. A clock pulse output is also provided for synchronizing with other converters.
380VDC Input, 24V/170W Active Clamp Forward
PMP7391: This reference design uses the UCC2894 to control an active clamp forward converter that generates an isolated 24V at 7A from a 380VDC input. This supply is intended to be used with a PFC boost front-end and requires an external 12V bias voltage for house-keeping on the primary side. This supply is over 91% efficient at full load.
Universal AC Input, 5V/10A/50W PSR Flyback Power Supply W/Rapid Load Transient Response Ref Design
PMP10407: PMP10407 is a quasi-resonant Flyback power suppy based on the UCC28730 primary side regulation (PSR) controller demonstrating the use of wake up device UCC24650 to achieve rapid load transient response from light load condition when the system is under low frequency operation. The elimination of optocoupler using PSR topology promises higher reliability and lower system cost. The design achieves less than 50mW standby power losses and over 86% efficiency at 25% load. The design also features UCC24610 synchronous rectification controller and demonstrates the use of UCC24650's ENS pin output to enforce diode rectification at light load conditions to reduce stand-by power losses.
SEPIC (12V@1.5A) for Access Points
PMP5910: This SEPIC converter provides a regulated 12V output from a 9V – 24V input and achieves efficiency greater than 92%. Possible applications include wireless, telecom and automotive.
36V-72V Input 12V/9A; 95% Efficient Active Clamp Forward
PMP5426: The PMP5426 reference design provides 12V at 9A from a standard 48V telecom input with greater than 95% efficiency. This design uses the UCC2897A active clamp controller with self-driven synchronous rectifiers to achieve very high efficiency.
PFC, Resonant Half-Bridge, Buck (PFC, 42V@6A) for Digital Audio
PMP5327: The PMP5327 reference design provides a 42V/6A output with power factor correction from a universal AC input voltage range. This design uses the UCC28019A to control the front end PFC boost stage. The output of the PFC is followed by a UCC25600 LLC resonant half-bridge. The total efficieny, from input to output is over 92% from a 230VAC input and over 89% from a 115VAC input. An additional 12V/250mA output is also generated by this supply.
Universal AC DLP Power Supply (40V @ 10A)
PMP5500.1: This reference design provides 400W of power from a universal AC input with power factor correction. The UCC28019A controls a PFC boost front end, while the UCC25600 LLC resonant-half bridge converts the PFC output to isolated 40V, 33V, and 27V outputs. The total system efficiency is over 89% with a 230VAC input and over 85% with an 115VAC input.
400VDC Input 12V/60W Synchronous Flyback
PMP5195: The PMP5195 reference design generates an isolated 5V at 60W. This design uses the UCC28610 quasi-resonant flyback controller in conjunction with current-transformer-driven synchronous rectifiers to provide good efficiency at heavy loads while maintaining low power consumption at light loads. The maximum load efficiency is over 90%, and the no load losses are less than 200mW when powered from a 400VDC input voltage.
Uses a UCC28600 to generate an output of 3.3V @ 0.150A
PMP4662: This application is suitable to supply microcontrollers in off-line non-isolated (metering) solutions.
27W Sonar Power Supply Reference Design
PMP8709: The PMP8709 reference design shows a SEPIC power supply, which converts input voltages between 8V and 32V to an output voltage of 13.5V. The maximum load current is 2A. Output capacitors are ceramic only.
Universal AC Input 5V/10A/50W PSR Flyback Power Supply With Over 89% Avg Efficiency Reference Design
PMP10974: PMP10974 is a quasi-resonant Flyback power suppy based on the UCC28730 primary side regulation (PSR) controller. The elimination of optocoupler using PSR topology promises higher reliability and lower system cost. The design achieves less than 40mW standby power losses and over 89% average efficiency. The design also features UCC2463x synchronous rectification controller.
36V-72VDC Input Active Clamp Forward With Dual 12V/50W Outputs
PMP4028: This power supply design generates a 12V/100W isolated output from a standard 48V telecom input. An active clamp forward converter is controlled by the UCC2897A. The INA202 and an external PFET are used to provide a current limited 12V/4.5A output derived from the main 12V output of the forward converter. This power supply has a peak efficiency of over 94%.
Boost (50V @ 1A)
PMP5940: This 24V to 50V continuous mode boost converter delivers 50W max with efficiency greater than 96%. The circuit uses the low cost TPS40210 controller, which implements current mode control.
Bisco Industries
分销商编号：
未知
单价:
暂无价格信息
请输入数量：
-+
库存/包装：
150
起订量：
1
递增量：
1
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
