更多产品参数
Small Signal Bipolar Transistor, 0.2A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon
制造商:
Tak Cheong Electronics (Holdings) Co Ltd
制造商型号:
MMBT3906T
符合标准:
Rohs 符合
数据手册:
文档下载
MMBT3906T数据表
参考设计(18)
Flyback, Linear Regulator for Medical Pack (5V @ 50mA) - PMP2187.3 - TI Tool Folder
PMP2187: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
220W Synchronous 4 Switch Buck-Boost Converter
PMP9490: PMP9490 is a 225W four Switch Buck –Boost Design utilizing best in Class Synchronous Buck Boost Converter LM5175. The design accepts an input voltage of 9.5Vin to 20Vin and provides the outputs of 15V@15 A for Constant Voltage Output Application such as Voltage stabilizer or as Power amplifier SMPS, 10.8V to 15V@12.5A for CC/CV Battery Charger application, and 12.5 A for Constant Current LED Drive application. It features an inexpensive and more efficient solution to using discrete Buck and boost converters. The average current regulation loop of the IC at the output is used for Battery Charging profiling with no external circuit being involved.
19 Watt AC Input LED Driver Reference Design
PMP3155: The PMP3155 reference design is a 19 W AC input LED Driver. The UCC3809 and TLC272 are used to control the current to the LED array dim the output according to input from a standard triac-based wall dimmer. The non isolated LED power driver achieves efficiencies around 85% for various line and dimmer setting conditions.
USB-C DFP + 5V2A Power Bank With Input Fast Charger Reference Design
PMP11536: PMP11536 is a power bank reference design with a USB typc C DFP plus a USB type A port employing the boost mode of a Maxcharger. Fast charger input is also supported to save more charging time. It can detect the input port attach/detach events automatically, as well as the output ports.
Flyback, Linear Regulator for Medical Pack (5V @ 440mA)
PMP2187.2: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (5.75V @ 10mA)
PMP2187.8: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Offline, 10 Watt Boost LED Driver (Dimmable) Reference Design
PMP6648: HVHB LEDs, when driven in a PFC boost configuration, have the advantages of small size, high PFC, high efficiency, low cost, and low complexity. This reference design is triac dimmable, taking universal AC in and drives 3 High Voltage LEDs at 10W.
Flyback, Linear Regulator for Medical Pack (-5V @ 10mA)
PMP2187.6: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (3.3V @ 220mA)
PMP2187.4: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (5V @ 50mA)
PMP2187.3: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Class 3- 36V-72V Input 2.5V/5A Active Clamp Forward; 1/16 Brick
PMP6886: The PMP6886 reference design provides 2.5V at 5A from a standard 48V telecom input with greater than 88% efficiency. This design uses the UCC2897A active clamp controller along with TI NexFET synchronous rectifiers. The low gate thresholds of the CSD16323Q3 and CSD16406Q3 allow them to be driven directly from the transformer windings. The circuit is built in an industry standard 1/16 brick footprint. Auxilliary features of this design include remote sense, output over-voltage protection, output voltage trim and primary side enable control.
Flyback, Linear Regulator for Medical Pack (5.5V @ 500mA)
PMP2187.1: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (-5V @ 10mA) - PMP2187.6 - TI Tool Folder
PMP2187: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (4V @ 250mA)
PMP2187.7: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (5.75V @ 10mA) - PMP2187.8 - TI Tool Folder
PMP2187: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
Flyback, Linear Regulator for Medical Pack (2.5 @ 2mA)
PMP2187.5: This design provides isolated 5V (x2), 3.3V, 2.5V and -5V outputs. All outputs are noise filtered using Low Drop Out (LDO) linear regulators for noise sensitive applications such as medical imaging and data acquisition.
国产器件
分销商编号：
TC_MMBT3906T
单价:
暂无价格信息
请输入数量：
-+
库存/包装：
0
起订量：
1
递增量：
1
国产器件 其它编号产品
分销商编号：
Galaxy_MMBT3906T
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
分销商编号：
JCET_MMBT3906T
起订量：
1
包装方式 * 包装量：
* 1
单价：
-
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
