更多产品参数
Operational Amplifier, 1 Func, 1800uV Offset-Max, BIPolar, PDSO5
制造商:
Texas Instruments
制造商型号:
OPA170AIDBVT
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
OPA170AIDBVT数据表
参考设计(10)
PMP7174 24V/1.45A AC/DC Flyback PSU for Industrial Applications Optimized for Low AC Line Input Ref. Design | TI.com
PMP7174: This design is a compact, low AC line input (Maximum 130Vac) Flyback converter which provides a regulated and fully-isolated 24V@1.45A output. Featuring TI's LM5021 current mode controller working at 135kHz, the converter features fast start-up and delivers greater than 85% efficiency from 30-100% load. The overall solution is very compact at 2312sq.mm. footprint area.
TIPD128 Capacitive Load Drive Verified Reference Design Using an Isolation Resistor | TI.com
TIPD128: This TI Verified Design implements a variety of op amps driving capacitive loads from 100pF to 1uF using a isolation resistor. The OPA192 is highlighted due to its ability to drive large capacitive loads with small isolation resistors.
24V/1.45A AC/DC Flyback PSU for Industrial Applications Optimized for Low AC Line Input Ref. Design
PMP7174: This design is a compact, low AC line input (Maximum 130Vac) Flyback converter which provides a regulated and fully-isolated 24V@1.45A output. Featuring TI's LM5021 current mode controller working at 135kHz, the converter features fast start-up and delivers greater than 85% efficiency from 30-100% load. The overall solution is very compact at 2312sq.mm. footprint area.
Capacitive Load Drive Verified Reference Design Using an Isolation Resistor
TIPD128: This TI Verified Design implements a variety of op amps driving capacitive loads from 100pF to 1uF using a isolation resistor. The OPA192 is highlighted due to its ability to drive large capacitive loads with small isolation resistors.
TIDA-00476 Highly Efficient, Versatile Bi-Directional Power Converter for Energy Storage and DC Home Solutions | TI.com
TIDA-00476: TIDA-00476 is comprised of a single DC-DC power stage, which can work as a synchronous buck converter or a synchronous boost converter, enabling bidirectional power flow between DC power source and energy storage system. Operating in synchronous buck mode, the system works as a MPPT controlled DC-DC converter which can charge a battery from a solar panel or DC Source. The same power stage can be operated as a synchronous boost to drive a DC load with configurable constant current and constant voltage limits (CC/CV), from an energy storage system such as lead acid battery. The power stage is digitally controlled by a MSP430 microcontroller, which implements the closed loop for controlling the power stage with required algorithms for MPPT, battery charge profiling and DC-Power conversion for load.
Highly Efficient, Versatile Bi-Directional Power Converter for Energy Storage and DC Home Solutions
TIDA-00476.1: TIDA-00476 is comprised of a single DC-DC power stage, which can work as a synchronous buck converter or a synchronous boost converter, enabling bidirectional power flow between DC power source and energy storage system. Operating in synchronous buck mode, the system works as a MPPT controlled DC-DC converter which can charge a battery from a solar panel or DC Source. The same power stage can be operated as a synchronous boost to drive a DC load with configurable constant current and constant voltage limits (CC/CV), from an energy storage system such as lead acid battery. The power stage is digitally controlled by a MSP430 microcontroller, which implements the closed loop for controlling the power stage with required algorithms for MPPT, battery charge profiling and DC-Power conversion for load.
TIDA-00559 Combined Voltage/Current Output with Surge Protection Reference Design | TI.com
TIDA-00559: The TIDA-00559 TI Design provides a universal analog output (AO) for industrial sensors and transmitters. It is based on a 16-Bit DAC and uses a single output. This common output is user configurable for 0 to 10-V or for 4 to 20-mA. Usage in harsh industrial environment is addressed by a dedicated protection circuitry, designed to withstand differential mode surge pulses up to 1 kV / 40 Ω according to IEC61000-4-5. An isolated digital interface eases board configuration and evaluation.
TIDA-00476 Highly Efficient, Versatile Bi-Directional Power Converter for Energy Storage and DC Home Solutions | TI.com
TIDA-00476: TIDA-00476 is comprised of a single DC-DC power stage, which can work as a synchronous buck converter or a synchronous boost converter, enabling bidirectional power flow between DC power source and energy storage system. Operating in synchronous buck mode, the system works as a MPPT controlled DC-DC converter which can charge a battery from a solar panel or DC Source. The same power stage can be operated as a synchronous boost to drive a DC load with configurable constant current and constant voltage limits (CC/CV), from an energy storage system such as lead acid battery. The power stage is digitally controlled by a MSP430 microcontroller, which implements the closed loop for controlling the power stage with required algorithms for MPPT, battery charge profiling and DC-Power conversion for load.
Highly Efficient, Versatile Bi-Directional Power Converter for Energy Storage and DC Home Solutions
TIDA-00476.2: TIDA-00476 is comprised of a single DC-DC power stage, which can work as a synchronous buck converter or a synchronous boost converter, enabling bidirectional power flow between DC power source and energy storage system. Operating in synchronous buck mode, the system works as a MPPT controlled DC-DC converter which can charge a battery from a solar panel or DC Source. The same power stage can be operated as a synchronous boost to drive a DC load with configurable constant current and constant voltage limits (CC/CV), from an energy storage system such as lead acid battery. The power stage is digitally controlled by a MSP430 microcontroller, which implements the closed loop for controlling the power stage with required algorithms for MPPT, battery charge profiling and DC-Power conversion for load.
Highly Efficient, Versatile Bi-Directional Power Converter for Energy Storage and DC Home Solutions - TIDA-00476.2 - TI Tool Folder
TIDA-00476: TIDA-00476 is comprised of a single DC-DC power stage, which can work as a synchronous buck converter or a synchronous boost converter, enabling bidirectional power flow between DC power source and energy storage system. Operating in synchronous buck mode, the system works as a MPPT controlled DC-DC converter which can charge a battery from a solar panel or DC Source. The same power stage can be operated as a synchronous boost to drive a DC load with configurable constant current and constant voltage limits (CC/CV), from an energy storage system such as lead acid battery. The power stage is digitally controlled by a MSP430 microcontroller, which implements the closed loop for controlling the power stage with required algorithms for MPPT, battery charge profiling and DC-Power conversion for load.
Farnell
分销商编号：
3117346
交货地:
中国大陆
单价:
- 阶梯 人民币价格(含税) 美元价格
- 1+ ¥13.6105 -
- 10+ ¥9.9208 -
- 50+ ¥8.9319 -
- 100+ ¥7.9962 -
- 250+ ¥7.8367 -
- 500+ ¥7.6772 -
- 1000+ ¥7.5177 -
- 2500+ ¥7.3582 -
请输入数量：
-+
总计:
库存/包装：
0
/ Cut Tape
起订量：
1
递增量：
1
备货时间：
13 Weeks, 1 Days
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
