文档下载
SI2302数据表
参考设计(8)
LDO, Buck/Boost, 2 Sync Buck, Sync Boost Reference Design
PR038: LDO, Buck/Boost, 2 Sync. Buck, Sync. Boost with Vin 2.7-4.2 V LiION or 4.5-6.5 V adapter. Multiple output voltages of 1.5 V, 2.5 V, 3.3 V and 8 V. The total output power is 5.5 W.
15V -> +/-23V @ 100mA
PMP5709.2: The PMP5709 +23.0V/-23.0V @ 100mA isolated flyback converter generates a positive and a negative output voltage from an input of 15V. It is a cheap solution for low output power.
14..24V -> 15V @ 0.9A - PMP5709.1 - TI Tool Folder
PMP5709: The PMP5709 15.0V @ 0.9A isolated flyback converter generates one output voltage from a 14-24V input. The input voltage range makes it ideal for industrial applications.
Flyback (-3.3V@10mA) for Seismic
PMP5317.2: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.
Flyback (7V@3.5mA) for Seismic - PMP5317.3 - TI Tool Folder
PMP5317: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.
Flyback (3.3V@8mA) for Seismic
PMP5317.1: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.
Flyback (7V@3.5mA) for Seismic
PMP5317.3: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.
Oneyac
分销商编号：
35542954
交货地:
中国大陆
单价:
- 阶梯 人民币价格(含税) 美元价格
- 3000+ ¥0.0338 -
请输入数量：
-+
总计:
库存/包装：
180,000
起订量：
3,000
递增量：
1
寄送至：
中国大陆境内
运费规则：
满 ￥299.00 免运费
, 查看细则
备货时间：
1周-3周
Oneyac 其它编号产品
分销商编号：
30508263
起订量：
3,000
包装方式 * 包装量：
* 1
单价：
¥0.0364
分销商编号：
30508584
起订量：
3,000
包装方式 * 包装量：
* 1
单价：
¥0.0480
分销商编号：
29544150
起订量：
3,000
包装方式 * 包装量：
* 1
单价：
¥0.0630
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
