文档下载
SMBJ15A数据表
参考设计(5)
Single-Channel Industrial Voltage & Current Output Driver, Isolated, EMC/EMI Tested Reference Design
TIPD153: This TI CerTIfied Reference Design implements a isolated single-channel industrial voltage and current output module using the DAC8760 and ISO7641. The circuit features a digitally controlled voltage or current output that produces the standard outputs of 0-20mA, 0-24mA, 4-20mA, 0-5V, +/-5V, 0-10V and +/-10V outputs based on the internal register settings of the DAC8760. The design includes the required external protection circuitry needed to pass the IEC61000-4-2/3/4/6 tests and IEC61000-4 test results are included. The protection circuitry does not negatively affect the voltage or current output performance resulting in <0.1% total unadjusted error (TUE) for both outputs.
AC/DC Buck Converter with 85VAC - 318VAC Input and 15V at 0.8A Output Reference Design
PMP10783: The PMP10783 reference design is an AC/DC buck converter. The input voltage range is 85VAC-318VAC, and has an output of 15V at 0.80A. This compact board design has an efficiency of greater than 80% at full load.
85-318Vin, 15Vout, 1Aout, AC-DC Buck Converter Reference Design
PMP10833: The PMP10833RevA reference design is a compact and thermally efficient design intended to step down a wide range of AC inputs. This design incorporates the UCC28C42, a current-mode PWM controller, with controllable frequencies up to 1Mhz.
Two-Channel Source/Sink Combined Voltage & Current Output, Isolated, EMC/EMI Tested Reference Design
TIPD155: This TI CerTIfied Reference Design implements a two channel combined voltage and current analog output module. The two outputs are independent and can both source and sink voltage and current over the standard industrial output ranges. While the design has been characterized with outputs of ±10 V and ±24 mA, output ranges of 0-5 V, 0-10 V, ±5 V, ±10 V.4-20 mA, 0-20 mA, 0-24 mA, ±20 mA, ±24 mA are possible by adjusting external resistor values. The design includes the necessary external protection elements required to pass the IEC61000-4-2/3/4/5/6 tests along with the measured test data. The protection circuitry does not negatively affect the design and test results showed typical unadjusted errors were <0.1% of the full-scale range (FSR) and calibrated errors were less than 0.01% FSR.
Analog Input Module for Industrial Outputs and Temperature Sensors Reference Design
TIPD164: This TI Designs, Precision Verified design implements an analog input module for industrial voltages, currents, and temperature sensors. For industrial outputs, the possible input ranges include: 4-20 mA, 0-20 mA, +/-25 mA, 0-5 V, 0-10 V, +/-5 V, +/-10 V. The design includes conditioning and level-shift circuitry which converts the large industrial outputs into a proper input range for a +5V delta-sigma ADC. The ADC has features to directly acquire information from the RTD and thermocouple sensors over their full temperature range.
UMW 友台半导体
分销商编号：
A225833544
交货地:
中国大陆
单价:
- 阶梯 人民币价格(含税) 美元价格
- 10+ ¥0.2703 -
- 1000+ ¥0.1714 -
请输入数量：
-+
总计:
库存/包装：
3,750
起订量：
10
递增量：
1
寄送至：
中国大陆境内
运费规则：
满 200.00 免运费
, 查看细则
备货时间：
3-5 days
