更多产品参数
LVC/LCX/Z SERIES, DUAL 2-INPUT XOR GATE, BGA8, GREEN, WCSP-8
制造商:
Texas Instruments
制造商型号:
SN74LVC2G86YZPR
符合标准:
Rohs 符合
含铅
数据手册:
文档下载
SN74LVC2G86YZPR数据表
参考设计(7)
8 Channel 1A/Ch High Side Driver for Programmable Logic Controller (PLC) Reference Design
TIDA-00183: The TIDA-00183 shows a high density, high power digital output circuitry with full protection and isolation for programmable logic controllers in factory automation and control environment. The BeagleBone-Black cape formfactor allows easy evaluation of the used driver chips and the interoperation with an MSP430 MCU for innovative protection schemes.
TIDA-00550 Dual Channel-to-Channel Isolated Universal Analog Input Module for PLC Reference Design | TI.com
TIDA-00550: The TIDA-00550, dual channel-to-channel isolated universal analog input module reference design for programmable logic controllers (PLC), combines precision and flexibility. This TI Design used in conjunction with sensor transmitters can measure standard input voltages and currents as well as thermocouples, RTD and 4-20mA loops. With only four input terminals, it is suited for applications where smallest real-estate, high versatility and performance is required at the same time.
TIDA-00560 16-channel Status LED Driver for PLC Modules Reference Design | TI.com
TIDA-00560: The objective of the TIDA-00560 TI Design is to demonstrate a multi-channel LED driver as required in PLC I/O modules to indicate the status of several analog, digital input, and output channels. Important requirements for such a design like low static current, low component count, minimal PCB requirements, and an integrated LED diagnostic features are addressed with this design. The two layer single-side component mounted board is compatible with the BeagleBone cape specification for rapid evaluation with the BeagleBone platform.
16-channel Status LED Driver for PLC Modules Reference Design
TIDA-00560: The objective of the TIDA-00560 TI Design is to demonstrate a multi-channel LED driver as required in PLC I/O modules to indicate the status of several analog, digital input, and output channels. Important requirements for such a design like low static current, low component count, minimal PCB requirements, and an integrated LED diagnostic features are addressed with this design. The two layer single-side component mounted board is compatible with the BeagleBone cape specification for rapid evaluation with the BeagleBone platform.
TIDA-00183 8 Channel 1A/Ch High Side Driver for Programmable Logic Controller (PLC) Reference Design | TI.com
TIDA-00183: The TIDA-00183 shows a high density, high power digital output circuitry with full protection and isolation for programmable logic controllers in factory automation and control environment. The BeagleBone-Black cape formfactor allows easy evaluation of the used driver chips and the interoperation with an MSP430 MCU for innovative protection schemes.
TIDA-00548 4-20mA Analog Input Module Reference Design for Safety Applications | TI.com
TIDA-00548: The TIDA-00548 design is an isolated dual-channel 4- to 20-mA analog input reference design, which can be used as a sub-part for functional safety programmable logic controllers (PLC). This reference design delivers digitized input values using a 32-bit high-performance analog-to-digital converter (ADC). The RM4x dual-core ARM® Cortex®-R4 based CPU with lockstep technology and built-in self-tests (BIST) compares the converted values of up to nine selectable analog input signal chain paths. The dual input approach with two separate burden resistors allows redundant measurement of either a single 4- to 20-mA loop or two independent loops. Hercules™ RM ARM Cortex-R based MCUs for functional safety applications (part of the SafeTI designs packages) help to develop systems according to IEC 61508 SIL 3.
TIDA-00764 8-ch Isolated High Voltage Analog Input Module Reference Design | TI.com
TIDA-00764: The TIDA-00764 reference design is a high voltage analog input module with eight channels. Each channel can be used for both, voltage and current measurement. The TI Design uses the 16-bit analog-to-digital converter (ADC) ADS8681 that can handle input voltage of up to ±12.288V. This make any preprocessing of standard input voltages in the industrial space unnecessary. In addition, four channels of the design are able to handle common-mode (CM) voltages of up to ±160V. Therefore, the user does not need to worry about ground loops or compensation currents flowing between the connected inputs.
DigiKey
分销商编号：
296-18259-1-ND
交货地:
港台地区
单价:
- 阶梯 人民币价格(含税) 美元价格
- 1+ - $0.7400
- 10+ - $0.5260
- 25+ - $0.4724
- 100+ - $0.4137
- 250+ - $0.3857
- 500+ - $0.3688
- 1000+ - $0.3641
请输入数量：
-+
总计:
库存/包装：
3,895
/ Cut Tape
起订量：
1
递增量：
1
寄送至：
中国大陆境内
运费规则：
￥300.00
起订
, 查看细则
DigiKey 其它编号产品
分销商编号：
296-18259-6-ND
起订量：
1
包装方式 * 包装量：
Digi-Reel * 1
单价：
$0.7400
分销商编号：
296-18259-2-ND
起订量：
3,000
包装方式 * 包装量：
Tape & Reel * 3,000
单价：
$0.3378
分销商编号：
2156-SN74LVC2G86YZPR-ND
起订量：
594
包装方式 * 包装量：
Bulk * 594
单价：
$0.5100
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
