更多产品参数
Operational Amplifier, 1 Func, 5000uV Offset-Max, CMOS, PDSO5
制造商:
Texas Instruments
制造商型号:
TLV271IDBVR
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
TLV271IDBVR数据表
参考设计(17)
PMP6867 9V - 32V input to -28V/1.5A negative output buck-boost LED current regulator | TI.com
PMP6867: This reference design uses the TPS40170 sync buck controller in a buck-boost converter to regulate the current in a series string of 6 to 8 LEDs (-28V) at up to 1.5A. Efficiency is greater than 93%. The output current can be adjusted with an external control voltage.
36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design - PMP7246.2 - TI Tool Folder
PMP7246: This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant converter). It can modulate output voltage from 20V to 32V within 200us (at maximum 200uF of capacitive load) – so called: slow drain modulation. The converter has full load steps capability as well. It is a very small design for high sophisticated telecom applications. The system can also be used for all other two quadrant applications. Input voltage range: 36VDC-60VDC; Output voltage: 20VDC…32VDC (adjustable); Output current: 12A (18Apeak).
36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design
PMP7246.2: This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant converter). It can modulate output voltage from 20V to 32V within 200us (at maximum 200uF of capacitive load) – so called: slow drain modulation. The converter has full load steps capability as well. It is a very small design for high sophisticated telecom applications. The system can also be used for all other two quadrant applications. Input voltage range: 36VDC-60VDC; Output voltage: 20VDC…32VDC (adjustable); Output current: 12A (18Apeak).
(-48.0V) -> +68.0V @ 0.3A
PMP5670.2: The PMP5670 +68.0V @ 300mA inverting buck-boost converter has an input voltage of -48V. It is designed to invert a negative input voltage to a positive output voltage.
PMP20371 125W Non-Isolated Inverting Buck Boost for Telecom -48V Applications Reference Design | TI.com
PMP20371: PMP20371 is a synchronous buck boost design utilizing the LM5122 for telecom applications. This design has a minimum operating input voltage of -35V and a maximum input voltage of -60V. Switching frequency is set to 150kHz. The design is built on PMP20371 PCB, 4 layer board with 2oz copper on each layer.
PMP7246 36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design | TI.com
PMP7246: This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant converter). It can modulate output voltage from 20V to 32V within 200us (at maximum 200uF of capacitive load) – so called: slow drain modulation. The converter has full load steps capability as well. It is a very small design for high sophisticated telecom applications. The system can also be used for all other two quadrant applications. Input voltage range: 36VDC-60VDC; Output voltage: 20VDC…32VDC (adjustable); Output current: 12A (18Apeak).
(-48.0V) -> -24.0V @ 0.3A
PMP5670.1: The PMP5670 -24.0V @ 300mA boost converter has an input voltage of -48V. It is designed to boost a negative input voltage to a lower negative output voltage.
PMP8639 LM5022 Cuk Converter Reference Design | TI.com
PMP8639: This converter delivers -36V with 1.5Amax out of an input voltage range of 32V to 40V. Another focus is loop compensation for Cuk topology.
9V - 32V input to -28V/1.5A negative output buck-boost LED current regulator
PMP6867: This reference design uses the TPS40170 sync buck controller in a buck-boost converter to regulate the current in a series string of 6 to 8 LEDs (-28V) at up to 1.5A. Efficiency is greater than 93%. The output current can be adjusted with an external control voltage.
Current Controlled Driver for 230V AC Solenoids Reference Design
TIDA-00284: TIDA-00284 proposes to integrate current control and plunger movement detection into an AC solenoid coil. This reference design provides a solution to control the solenoid current using a PWM-based controller along with a Hall sensor to detect plunger movement and switch from peak current to hold current mode Various applications in the field of industrial automation and material processing will benefit from up-to 70% reduced power consumption, accelerated process time, greatly simplified usage and enhanced monitoring capabilities.
Current Controlled Driver for 24-V DC Solenoid with Plunger Fault Detection Reference Design
TIDA-00289: The TI Design TIDA-00289 proposes to integrate current control and plunger movement detection into the solenoid coil. Various applications in the field of industrial automation and material processing will benefit from up-to 70% reduced power consumption, accelerated process time, greatly simplified usage and enhanced monitoring capabilities.
TIDA-00289 Current Controlled Driver for 24-V DC Solenoid with Plunger Fault Detection Reference Design | TI.com
TIDA-00289: The TI Design TIDA-00289 proposes to integrate current control and plunger movement detection into the solenoid coil. Various applications in the field of industrial automation and material processing will benefit from up-to 70% reduced power consumption, accelerated process time, greatly simplified usage and enhanced monitoring capabilities.
TIDA-00284 Current Controlled Driver for 230V AC Solenoids Reference Design | TI.com
TIDA-00284: TIDA-00284 proposes to integrate current control and plunger movement detection into an AC solenoid coil. This reference design provides a solution to control the solenoid current using a PWM-based controller along with a Hall sensor to detect plunger movement and switch from peak current to hold current mode Various applications in the field of industrial automation and material processing will benefit from up-to 70% reduced power consumption, accelerated process time, greatly simplified usage and enhanced monitoring capabilities.
PMP5670 3.3V -> 1.5V @ 500mA | TI.com
PMP5670: The PMP5670 -24.0V @ 300mA boost converter has an input voltage of -48V. It is designed to boost a negative input voltage to a lower negative output voltage.
PMP7246 36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design | TI.com
PMP7246: This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant converter). It can modulate output voltage from 20V to 32V within 200us (at maximum 200uF of capacitive load) – so called: slow drain modulation. The converter has full load steps capability as well. It is a very small design for high sophisticated telecom applications. The system can also be used for all other two quadrant applications. Input voltage range: 36VDC-60VDC; Output voltage: 20VDC…32VDC (adjustable); Output current: 12A (18Apeak).
36-60Vin, 350W Slow Drain Modulation Power Converter with PSFB ZTE and HSHB Reference Design
PMP7246.1: This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant converter). It can modulate output voltage from 20V to 32V within 200us (at maximum 200uF of capacitive load) – so called: slow drain modulation. The converter has full load steps capability as well. It is a very small design for high sophisticated telecom applications. The system can also be used for all other two quadrant applications. Input voltage range: 36VDC-60VDC; Output voltage: 20VDC…32VDC (adjustable); Output current: 12A (18Apeak).
PMP5670 3.3V -> 1.5V @ 500mA | TI.com
PMP5670: The PMP5670 -24.0V @ 300mA boost converter has an input voltage of -48V. It is designed to boost a negative input voltage to a lower negative output voltage.
Newark
分销商编号：
29AH7886
交货地:
港台地区
单价:
- 阶梯 人民币价格(含税) 美元价格
- 1+ - $0.9960
- 10+ - $0.9520
- 25+ - $0.9050
- 50+ - $0.8650
- 100+ - $0.8280
- 250+ - $0.8020
- 500+ - $0.7830
- 1000+ - $0.7700
请输入数量：
-+
总计:
库存/包装：
0
/ Cut Tape
起订量：
1
递增量：
1
生产日期：
1
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
