更多产品参数
Switching Controller, Voltage-mode, 6A, 2000kHz Switching Freq-Max, BICMOS, PDSO16
制造商:
Texas Instruments
制造商型号:
TPS43000PWR
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
TPS43000PWR数据表
参考设计(26)
Generates 4V@ 800mA avg/2.5Apeak using SEPIC configuration
PMP5624: lowest input voltage, synchronous sepic w/ TPS43000, provides up to 10W output power
PMP5624 Generates 4V@ 800mA avg/2.5Apeak using SEPIC configuration | TI.com
PMP5624: lowest input voltage, synchronous sepic w/ TPS43000, provides up to 10W output power
TPS43000 Synchronous Boost
PMP2631: From a Li-Ion battery the PMP2631 supplies 5V @ 3A with the best possible efficiency due to the sync-boost topology.
Negative Synchronous Buck -2.2V@6A
PMP5165: This “upside-down” synchronous buck regulates a -2.2V output @ 6A from a -5.2 input voltage and achieves a full load efficiency of 93%. Level shifting in the feedback is necessary to maintain regulation.
PMP5719 Boost Converter (2.5V to 3.6V to 4.1V@2.4A) | TI.com
PMP5719: This very small 10W sync. Boost converter has an almost flat efficiency through the load (96% full load, 3.6Vin) and showing still 92% efficiency at 20mW load, 3.3Vin.
PMP5417 Sync Boost 5V@4A for USB Battery Chargers | TI.com
PMP5417: PMP5417 is a high efficiency synchronous boost converter using the TPS43000. The 2.5V-4.2V input allows operation from a 3.3V source as well as a lithium-ion battery. The output power is 5V/4A.
Flyback (-3.3V@10mA) for Seismic
PMP5317.2: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.
Flyback (7V@3.5mA) for Seismic - PMP5317.3 - TI Tool Folder
PMP5317: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.
PMP5165 Negative Synchronous Buck -2.2V@6A | TI.com
PMP5165: This “upside-down” synchronous buck regulates a -2.2V output @ 6A from a -5.2 input voltage and achieves a full load efficiency of 93%. Level shifting in the feedback is necessary to maintain regulation.
PMP2631 TPS43000 Synchronous Boost | TI.com
PMP2631: From a Li-Ion battery the PMP2631 supplies 5V @ 3A with the best possible efficiency due to the sync-boost topology.
Sync Boost 5V@4A for USB Battery Chargers
PMP5417: PMP5417 is a high efficiency synchronous boost converter using the TPS43000. The 2.5V-4.2V input allows operation from a 3.3V source as well as a lithium-ion battery. The output power is 5V/4A.
Flyback (3.3V@8mA) for Seismic
PMP5317.1: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.
PMP4632 TPS43000 Synchronous Boost | TI.com
PMP4632: single cell LiIon boost converter w/ SR, TPS43000 covers 7W output power at lowest input voltage
Flyback (7V@3.5mA) for Seismic
PMP5317.3: This reference design provides isolated 7V, +3.3V, and -3.3V outputs at 100mW total power from a 2.6Vdc to 5.1Vdc input. With total power loss below 40mW, the full load efficiency is over 70%. The minimum load losses are kept below 25mW. The TPS43000 is used to control this multiple-output flyback converter. The entire circuit fits onto a 1 square inch, single-sided circuit board.
TPS43000 Synchronous Boost
PMP4632: single cell LiIon boost converter w/ SR, TPS43000 covers 7W output power at lowest input voltage
Boost Converter (2.5V to 3.6V to 4.1V@2.4A)
PMP5719: This very small 10W sync. Boost converter has an almost flat efficiency through the load (96% full load, 3.6Vin) and showing still 92% efficiency at 20mW load, 3.3Vin.
Rochester Electronics
分销商编号：
未知
交货地:
港台地区
单价:
- 阶梯 人民币价格(含税) 美元价格
- 25+ - $4.1690
- 100+ - $3.9600
- 500+ - $3.7510
- 1000+ - $3.5420
- 10000+ - $3.3330
请输入数量：
-+
总计:
库存/包装：
163,790
起订量：
25
递增量：
25
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
