TIDM-SOMPLC-INDUSTRIAL-CENELEC: This reference design is a single-board System on Module(SOM) for industrial PLC in the Cenelec frequency band. This TI implementation of Power Line Communications (PLC) is a new option for adding communications to industrial equipment such as solar arrays.PLC Lite™ offers higher data throughput than earlier forms of PLC and greater robustness for transmission across noisy electric lines by using OFDM PHY technology. The industrial PLC achieves up to 21 kbps data rates across AC or DC power lines compared to traditional SFSK PLC solutions (2-5 kbps) all while decreasing the overall BOM cost of a typical PLC modem. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry. The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system. OEMs will benefit from having the ability to rapidly evaluate and prototype Power Line Communications technology in their application.

TIDM-SOMPLC-FCC: The SOMPLC-FCC is a single-board System on Module(SOM) for narrowband Power Line Communications in the FCC frequency band. Narrowband PLC is designed for Smart Grid Advanced Metering Infrastructure (AMI) networks. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry(TIDA-00192). The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system. OEMs will benefit from having the ability to rapidly evaluate and prototype Power Line Communications technology in their application.

TIDM-SOMPLC-F28PLC83: This reference design has been replaced by the newer version TIDM-SOMPLC-F28PLC84. The SOMPLC-F28PLC83 is a single-board System on Module(SOM) for PLC in the CENELEC frequency band. This single hardware design supports Prime PLC industry standards. TI's certified PLC software is available along with the SOMPLC-F28PLC83. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry. The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system. OEMs will benefit from having the ability to rapidly evaluate and prototype Power Line Communications technology in their application.

TIDM-SOMPLC-G3-CENELEC: The SOMPLC-F28PLC83 is a single-board System on Module(SOM) for G3-PLC in the CENELEC frequency band. Texas Instruments’ production-ready G3-PLC software is available along with the SOMPLC-F28PLC83. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry. The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system. OEMs will benefit from having the ability to rapidly evaluate and prototype Power Line Communications technology in their application.

PMP7146: The PMP7146 has been designed especially for E-meters with PLC (power line communication) on board. The input filter shows high impedance to the PLC transmitter and the controller LM5021 works in constant switching frequency. A settable skip-mode improves the efficiency at light load. Two Bucks and an LDO supply the power to the digital section of the E-meter.

PMP7146.1: The PMP7146 has been designed especially for E-meters with PLC (power line communication) on board. The input filter shows high impedance to the PLC transmitter and the controller LM5021 works in constant switching frequency. A settable skip-mode improves the efficiency at light load. Two Bucks and an LDO supply the power to the digital section of the E-meter.

PMP7146: The PMP7146 has been designed especially for E-meters with PLC (power line communication) on board. The input filter shows high impedance to the PLC transmitter and the controller LM5021 works in constant switching frequency. A settable skip-mode improves the efficiency at light load. Two Bucks and an LDO supply the power to the digital section of the E-meter.

TIDEP0059: The TIDEP0059 reference design implements a complete Power Line Communications (PLC) Data Concentrator based upon the G3-PLC industry standard. It operates in the 36 kHz – 91 kHz band defined by the CENELEC for Smart Grid communications. The reference design includes G3-PLC software which supports the management of up to 1000 G3-PLC end points in a neighborhood area network. The reference design supports the full 312 Kbps data throughput specified by the G3-PLC standard.

TIDM-SOMPLC-F28PLC84: The SOMPLC-F28PLC84 is a single-board System on Module(SOM) for PLC in the CENELEC frequency band. This single hardware design supports several popular PLC industry standards including PRIME, G3-PLC, and IEEE-1901.2. The SOMPLC-F28PLC84 replaces the earlier SOMPLC-F28PLC83 and is fully hardware and software compatible with the earlier design. TI develops and provides the complete PLC software stacks along with the SoM. A single hardware design which supports multiple PLC standards allows OEMs to reduce development costs by reusing the PLC hardware in products for multiple different regions of the world with different PLC requirements. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry, which TI provides through the TIDA-00192 reference design. The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system.

TIDM-SOMPLC-F28PLC83: This reference design has been replaced by the newer version TIDM-SOMPLC-F28PLC84. The SOMPLC-F28PLC83 is a single-board System on Module(SOM) for PLC in the CENELEC frequency band. This single hardware design supports Prime PLC industry standards. TI's certified PLC software is available along with the SOMPLC-F28PLC83. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry. The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system. OEMs will benefit from having the ability to rapidly evaluate and prototype Power Line Communications technology in their application.

PMP7146.4: The PMP7146 has been designed especially for E-meters with PLC (power line communication) on board. The input filter shows high impedance to the PLC transmitter and the controller LM5021 works in constant switching frequency. A settable skip-mode improves the efficiency at light load. Two Bucks and an LDO supply the power to the digital section of the E-meter.

TIDM-SOMPLC-F28PLC84: The SOMPLC-F28PLC84 is a single-board System on Module(SOM) for PLC in the CENELEC frequency band. This single hardware design supports several popular PLC industry standards including PRIME, G3-PLC, and IEEE-1901.2. The SOMPLC-F28PLC84 replaces the earlier SOMPLC-F28PLC83 and is fully hardware and software compatible with the earlier design. TI develops and provides the complete PLC software stacks along with the SoM. A single hardware design which supports multiple PLC standards allows OEMs to reduce development costs by reusing the PLC hardware in products for multiple different regions of the world with different PLC requirements. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry, which TI provides through the TIDA-00192 reference design. The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system.

TIDEP0058: The TIDEP0058 reference design implements a complete Power Line Communications (PLC) Data Concentrator based upon the G3-PLC industry standard. It operates in the 157 kHz – 487 kHz band defined by the FCC for Smart Grid communications. The reference design includes G3-PLC software which supports the management of up to 1000 G3-PLC end points in a neighborhood area network. The reference design supports the full 312 Kbps data throughput specified by the G3-PLC standard.

TIDM-SOMPLC-G3-CENELEC: The SOMPLC-F28PLC83 is a single-board System on Module(SOM) for G3-PLC in the CENELEC frequency band. Texas Instruments’ production-ready G3-PLC software is available along with the SOMPLC-F28PLC83. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry. The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system. OEMs will benefit from having the ability to rapidly evaluate and prototype Power Line Communications technology in their application.

TIDM-SOMPLC-INDUSTRIAL-CENELEC: This reference design is a single-board System on Module(SOM) for industrial PLC in the Cenelec frequency band. This TI implementation of Power Line Communications (PLC) is a new option for adding communications to industrial equipment such as solar arrays.PLC Lite™ offers higher data throughput than earlier forms of PLC and greater robustness for transmission across noisy electric lines by using OFDM PHY technology. The industrial PLC achieves up to 21 kbps data rates across AC or DC power lines compared to traditional SFSK PLC solutions (2-5 kbps) all while decreasing the overall BOM cost of a typical PLC modem. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry. The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system. OEMs will benefit from having the ability to rapidly evaluate and prototype Power Line Communications technology in their application.

TIDM-SOMPLC-FCC: The SOMPLC-FCC is a single-board System on Module(SOM) for narrowband Power Line Communications in the FCC frequency band. Narrowband PLC is designed for Smart Grid Advanced Metering Infrastructure (AMI) networks. Engineers can take the SOM design and integrate it into their overall system board or keep the design as an add-on board to their application. The only additional hardware required is the AC mains line coupling circuitry(TIDA-00192). The included hardware schematics and Gerber files simplify the task for engineers to add PLC to their end system. OEMs will benefit from having the ability to rapidly evaluate and prototype Power Line Communications technology in their application.

PMP7146.3: The PMP7146 has been designed especially for E-meters with PLC (power line communication) on board. The input filter shows high impedance to the PLC transmitter and the controller LM5021 works in constant switching frequency. A settable skip-mode improves the efficiency at light load. Two Bucks and an LDO supply the power to the digital section of the E-meter.

PMP7146.2: The PMP7146 has been designed especially for E-meters with PLC (power line communication) on board. The input filter shows high impedance to the PLC transmitter and the controller LM5021 works in constant switching frequency. A settable skip-mode improves the efficiency at light load. Two Bucks and an LDO supply the power to the digital section of the E-meter.