更多产品参数
Fixed Positive LDO Regulator, 5V, 0.5V Dropout, CMOS, PDSO8
制造商:
Texas Instruments
制造商型号:
TPS7A6650QDGNRQ1
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
TPS7A6650QDGNRQ1数据表
参考设计(9)
TIDA-00296 Automotive Body Control Module Driver Reference Design | TI.com
TIDA-00296: TIDA-00296 is a reference design that highlights TI's high-side and low-side relay, motor, and load driver portfolios. The loads for this design (door locks, window lifts, seat heaters, HVAC, lamps, and LEDs) were chosen to show the range of loads that a BCM can drive and how TI's solutions fit into these areas.
TIDA-00271 ADAS Sensor Interconnect Reference Design Board for Remote Camera and Radar Modules | TI.com
TIDA-00271: The ADAS Sensor Interconnect Board is intended for applications where remote sensors like cameras, LIDAR or radar modules need to be connected to a central processing ECU. The board supports up to 3 coaxial and 1 LVDS twisted pair data inputs as well as 3 FMC cable and 1 board to board connector as data outputs to a processing ECU. Camera or other sensor modules connected through the coax connector (SMB standard) are powered directly via the coaxial cable (power over coax) from the interconnect board. Because of an independent complete power solution for all ICs and power over coax on board, a single car battery or similar wide voltage supply can be directly connected to the power connector on the ADAS Sensor Interconnect Board. An on-board uC and LIN interface allow control and configuration of the Interconnect board as well as plug-and-play operation.
TIDA-00156 Capacitive Touch Operated Automotive LED Dome Light with Haptics Feedback | TI.com
TIDA-00156: This TIDA-00156 reference design is a capacitive touch / haptic feedback automotive interior lighting solution optimized for automotive Dome light / Map light applications. The solution features a haptic driver with extensive integrated library (100+ effects) for ERM actuators, constant current LED driver with integrated PWM input permitting LED brightness regulation, low power MCU optimized for capacitive touch, and LIN interface communication.
Automotive Body Control Module Driver Reference Design
TIDA-00296: TIDA-00296 is a reference design that highlights TI's high-side and low-side relay, motor, and load driver portfolios. The loads for this design (door locks, window lifts, seat heaters, HVAC, lamps, and LEDs) were chosen to show the range of loads that a BCM can drive and how TI's solutions fit into these areas.
Single Supply Analog Input Module Reference Design with 16-Bit, 8-Channel ADC for PLC
TIPD166: This design is for a 16-bit, 8-channel analog input module for industrial programmable logic controller (PLC) systems. The circuit is realized with an 8-channel, 16-bit, successive-approximation-register (SAR), analog-to-digital converter (ADC) with an integrated precision reference and analog front-end (AFE) circuit.
TIDA-01007 EMC Compatible Automotive LED Rear Lamp With Sequential Turn Animation Reference Design | TI.com
TIDA-01007: This design is an analog solution for automotive rear lamps with sequential turn animations. This design is compatible with the TL81000 RI and the BCI test in a third-party EMC lab. This design also illustrates full automotive diagnostic with low quiescent current during fault mode.
TIDA-00278 Automotive Cluster Telltale Driver Reference Design | TI.com
TIDA-00278: This TI reference design is an automotive cluster telltale solution that includes a monolithic, medium-voltage, low-current power 12-bit shift register designed for use in systems that require relatively moderate load power, such as LEDs found in automotive clusters. This design is one part of an entire automotive cluster system solution optimized for the mid-end cluster market. The entire solution supports 4.5-40V system capabilities that can withstand cold crank, start stop, and load dump conditions.
PMP11769 700W Automotive External Audio Amplifier Reference Design | TI.com
PMP11769: The PMP11769 reference design is a complete solution for a 700W automotive external amp. The boost converter provides 36.0V @ 10.0A continuous / 20.0A peak from an input voltage of 9-16V. It contains two premium Class-D audio amplifiers, which provide 2x 175W @ 4-Ω load (left & right channel) and 1x 350W @ 2-Ω (subwoofer).The design is well suited for car audio external amp applications due to its thin profile and high power output.
TIPD166 Single Supply Analog Input Module Reference Design with 16-Bit, 8-Channel ADC for PLC | TI.com
TIPD166: This design is for a 16-bit, 8-channel analog input module for industrial programmable logic controller (PLC) systems. The circuit is realized with an 8-channel, 16-bit, successive-approximation-register (SAR), analog-to-digital converter (ADC) with an integrated precision reference and analog front-end (AFE) circuit.
Bristol Electronics
分销商编号：
未知
交货地:
中国大陆
单价:
- 阶梯 人民币价格(含税) 美元价格
- 3+ ¥13.8672 -
- 13+ ¥10.4004 -
- 39+ ¥8.6670 -
请输入数量：
-+
总计:
库存/包装：
43
起订量：
3
递增量：
1
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
