更多产品参数
ULN2003A is a high-voltage, high-current Darlington transistor array with seven NPN pairs, each rated for 500mA collector current and 50V output, featuring integrated clamp diodes and 2.7kΩ base resistors for TTL or CMOS compatibility.
制造商:
UMW 友台半导体
制造商型号:
ULN2003A
符合标准:
未知
数据手册:
文档下载
ULN2003A数据表
参考设计(3)
TIDM-HV-1PH-DCAC Single-Phase Inverter Reference Design With Voltage Source and Grid Connected Modes | TI.com
TIDM-HV-1PH-DCAC: This reference design implements single-phase inverter (DC-AC) control using the C2000™ F28377D microcontroller. Design supports two modes of operation for the inverter. First is the voltage source mode using an output LC filter. This control mode is typically used in uninterruptible power supplies (UPS). Second is grid connected mode with an output LCL filter, which is typically used in solar inverters. Firmware for the design is supported under the powerSUITE framework which enables adaptation using the Solution Adapter and enables tuning of the control loop using the Compensation Designer and SFRA. High-efficiency, low THD and intuitive software make this design attractive for engineers working on inverter design for UPS and alternative energy applications such as PV inverters, grid storage and micro grids.
TIDA-01329 Configurable Stepper Driver for HVAC Louver and Motor Control Reference Design | TI.com
TIDA-01329: This reference design provides a flexible stepper motor system designed to drive up to two stepper motors, or 8 peripherals, while reducing the number of GPIOs needed from the host controller reducing overall cost. The system is suitable for applications requiring stepper motors or coils up to 50V, and a max current of 2.5A (with all channels enabled). This design features multiple configurations for outputs, allowing multiple peripherals to be driven (i.e. 1 motor, 1 buzzer, 1 relay, and 2 LEDs). It is adaptable to automated louver control in Heating Ventilation and Air Conditioning (HVAC) systems as well as control of relays, buzzers, and LEDs. This concept could also be more broadly expanded to drive any number of channels for other building automation designs including louver control in smart ventilation systems, automated window blind tilting, as well as pan and tilt control for IP cameras.
Single-Phase Inverter Reference Design With Voltage Source and Grid Connected Modes
TIDM-HV-1PH-DCAC: This reference design implements single-phase inverter (DC-AC) control using the C2000™ F28377D microcontroller. Design supports two modes of operation for the inverter. First is the voltage source mode using an output LC filter. This control mode is typically used in uninterruptible power supplies (UPS). Second is grid connected mode with an output LCL filter, which is typically used in solar inverters. Firmware for the design is supported under the powerSUITE framework which enables adaptation using the Solution Adapter and enables tuning of the control loop using the Compensation Designer and SFRA. High-efficiency, low THD and intuitive software make this design attractive for engineers working on inverter design for UPS and alternative energy applications such as PV inverters, grid storage and micro grids.
UMW 友台半导体
分销商编号：
A225833076
交货地:
中国大陆
单价:
- 阶梯 人民币价格(含税) 美元价格
- 5+ ¥0.5482 -
- 2500+ ¥0.3256 -
请输入数量：
-+
总计:
库存/包装：
12,500
起订量：
5
递增量：
1
寄送至：
中国大陆境内
运费规则：
满 200.00 免运费
, 查看细则
备货时间：
3-5 days
