更多产品参数
Fixed Resistor, Metal Strip, 1W, 0.01ohm, 0.1V, 1% +/-Tol, 75ppm/Cel, Surface Mount, 1206
制造商:
Vishay
制造商型号:
WSLP1206R0100FEA
符合标准:
Rohs 符合
不含铅
数据手册:
文档下载
WSLP1206R0100FEA数据表
参考设计(11)
48Vin, 300W 1/8brick Digital Module with GaN FET Reference Design
PMP4435.2: The PMP4435 is a DC-DC isolated digital module with GaN mosfet reference design targeted for industrial and telecom applications. The DC input range is 36V-60V, with 12V typical and the output is 12V/5A. An digital controller UCD3138A is used in the design. The efficiency is up to 95.8% with good thermal performance.
24VDC 10A eFuse and Protection Circuit for Programmable Logic Controllers (PLC)
TIDA-00233: This sub system design shows an IC based implementation of over voltage, over current, reverse current, reverse polarity and miss wire protection which is more accurate, lower power and faster compared to fuses, PTCs and diodes. Programmable Logic Controller (PLC) I/O modules connected to a field power supply benefit from protection on the 24V field input connectors as power supply faults or miss wiring might damage or cause the module to not operate correctly.
8 Channel 1A/Ch High Side Driver for Programmable Logic Controller (PLC) Reference Design
TIDA-00183: The TIDA-00183 shows a high density, high power digital output circuitry with full protection and isolation for programmable logic controllers in factory automation and control environment. The BeagleBone-Black cape formfactor allows easy evaluation of the used driver chips and the interoperation with an MSP430 MCU for innovative protection schemes.
48Vin, 300W 1/8brick Digital Module with GaN FET Reference Design
PMP4435.4: The PMP4435 is a DC-DC isolated digital module with GaN mosfet reference design targeted for industrial and telecom applications. The DC input range is 36V-60V, with 12V typical and the output is 12V/5A. An digital controller UCD3138A is used in the design. The efficiency is up to 95.8% with good thermal performance.
48Vin, 300W 1/8brick Digital Module with GaN FET Reference Design
PMP4435.3: The PMP4435 is a DC-DC isolated digital module with GaN mosfet reference design targeted for industrial and telecom applications. The DC input range is 36V-60V, with 12V typical and the output is 12V/5A. An digital controller UCD3138A is used in the design. The efficiency is up to 95.8% with good thermal performance.
Power Supply for Sensitive Loads and Input Voltages Smaller, Equal or Bigger than the Output Voltage
PMP10070: This reference design is based on the ZETA topology for having very low output ripple. An input voltage between 8V and 16V generates an output voltage of 12V with a load of 1.5A.
SMBus 1- to 4-cell Hybrid Power Boost Mode Battery Charge Controller Reference Design
TIDA-00657: The TIDA-00657 reference design enables high efficiency (90+% @1-2A) and faster charge with high charging current up to 3A. The design uses TI's BQ24780 Industrial Innovative Charge Controlller with Hybrid Power Boost Mode and also features power and processor hot monitoring capability.
48Vin, 300W 1/8brick Digital Module with GaN FET Reference Design
PMP4435.1: The PMP4435 is a DC-DC isolated digital module with GaN mosfet reference design targeted for industrial and telecom applications. The DC input range is 36V-60V, with 12V typical and the output is 12V/5A. An digital controller UCD3138A is used in the design. The efficiency is up to 95.8% with good thermal performance.
48Vin, 300W 1/8brick Digital Module with GaN FET Reference Design
PMP4435.6: The PMP4435 is a DC-DC isolated digital module with GaN mosfet reference design targeted for industrial and telecom applications. The DC input range is 36V-60V, with 12V typical and the output is 12V/5A. An digital controller UCD3138A is used in the design. The efficiency is up to 95.8% with good thermal performance.
48Vin, 300W 1/8brick Digital Module with GaN FET Reference Design
PMP4435.5: The PMP4435 is a DC-DC isolated digital module with GaN mosfet reference design targeted for industrial and telecom applications. The DC input range is 36V-60V, with 12V typical and the output is 12V/5A. An digital controller UCD3138A is used in the design. The efficiency is up to 95.8% with good thermal performance.
15W Automotive Start Stop Power Supply
PMP9476: PMP9476 is non-sync buck converter plus a non-sync boost controller accepts an input voltage of 3.5V to 40V, and outputs 5V, capable of providing 3A of current to the load.
Farnell
分销商编号：
2420762
交货地:
中国大陆
单价:
- 阶梯 人民币价格(含税) 美元价格
- 10+ ¥3.8670 -
- 100+ ¥3.1478 -
- 500+ ¥2.6684 -
- 1000+ ¥2.4390 -
- 2000+ ¥2.3557 -
- 4000+ ¥2.2723 -
请输入数量：
-+
总计:
库存/包装：
32,041
/ Cut Tape
起订量：
10
递增量：
10
备货时间：
20 Weeks, 0 Days
搜索更多的分销商结果
搜索
请输入完整或部分产品型号，最少 3 个字母或数字
