参考设计
(17)
TIDA-00891 USB Type-C Plug to USB Type-A Receptacle SuperSpeed MUX With UFP Controller Reference Design | TI.com
TIDA-00891: The TIDA-00891 is designed to evaluate HD3SS3220 devices for UFP implementations. This reference design can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector. Reference design files can be provided upon request to aid PCB design with HD3SS3220. The layout files can be used as a guideline to implement the TUSB321A with illustrations of the routing/placement rules. The reference design includes on-board USB Type-A plug to connect legacy USB systems. Please note that the reference design may include test components for evaluation purposes not applicable for production.
TIDA-00565 USB Type-C Audio Adapter Accessory Mode Reference Design | TI.com
TIDA-00565: The USB Type-C™ audio adapter accessory mode reference design provides the solution for transmitting analog audio through the USB Type-C interface. This reference design demonstrates how analog audio can be transmitted to system peripherals using the USB Type-C standard audio adapter accessory mode, while still maintaining the ability to transfer USB data over the same USB Type-C connector.
TIDA-00204 EMI/EMC Compliant Industrial Temp Dual Port Gigabit Ethernet PHY Reference Design | TI.com
TIDA-00204: This design allows for performance evaluation of two industrial grade DP83867IR Gigabit Ethernet PHYs and Sitara™ host processors with integrated Ethernet MAC and Switch. It was developed to meet industrial requirements for EMI and EMC. The application firmware implements a driver for the PHY, UDP and TCP/IP stack and HTTP web server examples. The host processor is configured to boot the pre-installed firmware from on-board SD-Card. A USB virtual COM port offers optional access to the PHYs registers. A JTAG interface allows for own firmware development.
USB Type-A to USB TypeC SS (SuperSpeed) MUX with DFP Controller Reference Design
TIDA-00624: This addapter converts a USB standard host type-A port to Type-C DFP (downstream-facing port) with support for default, 1.5 A and 3.0A VBUS current levels. The TUSB2522 simplifies the design by integrating 2:1 USB 3.1 (up to 10 Gbps) mux with a DFP controller to monitor the Type-C configuration channel (CC) pins to determine plug orientation for mux selection and device attachment for controlling VCONN and VBUS power switches.
DECA Reference Design Featuring Altera’s Max10 FPGA Developed by Arrow Electronics : Arrow Electronics
DECA: DECA is a full featured hardware evaluation board, available through Arrow Electronics, that enables engineers to reduce board area, cost, and complexity while interfacing to a multitude of sensors and interfaces including Texas Instruments’ (TI) new humidity and industry leading temperature sensor. Additionally, the board incorporates other signal chain, audio, logic and sensing integrated circuits from TI. Coupled with a BLE/WIFI cape, both software and hardware engineers can kickstart an Internet of Things (IoT) design taking integration to the next level.
TIDA-00630 TI USB Type-C Dock Reference Design | TI.com
TIDA-00630: The Type-C Dock Board is designed to help evaluate Type-C Dock implementations with video and charging support. The Type-C Dock offers data and video port expansion and a charging capability for Type-C systems that support USB PD/Alternate mode protocol. The dock comes with three downstream facing ports: two Type C DFP only ports with max of 5V@3A VBUS power, one Type-A DFP port with BC1.2 support. A DisplayPort connector is also provided for video sink connection: A direct connect to a DisplayPort monitor, connection to a MST HUB or a DP protocol converter to a monitor.
DECA Reference Design Featuring Altera’s Max10 FPGA Developed by Arrow Electronics : Arrow Electronics
DECA: DECA is a full featured hardware evaluation board, available through Arrow Electronics, that enables engineers to reduce board area, cost, and complexity while interfacing to a multitude of sensors and interfaces including Texas Instruments’ (TI) new humidity and industry leading temperature sensor. Additionally, the board incorporates other signal chain, audio, logic and sensing integrated circuits from TI. Coupled with a BLE/WIFI cape, both software and hardware engineers can kickstart an Internet of Things (IoT) design taking integration to the next level.
EMI/EMC Compliant Industrial Temp Dual Port Gigabit Ethernet Reference Design
TIDA-00204: This design allows for performance evaluation of two industrial grade DP83867IR Gigabit Ethernet PHYs and Sitara™ host processors with integrated Ethernet MAC and Switch. It was developed to meet industrial requirements for EMI and EMC. The application firmware implements a driver for the PHY, UDP and TCP/IP stack and HTTP web server examples. The host processor is configured to boot the pre-installed firmware from on-board SD-Card. A USB virtual COM port offers optional access to the PHYs registers. A JTAG interface allows for own firmware development.
TIDA-00643 4.4 V to 30 V, 15 A, High Performance Brushless DC Drone Propeller Controller Reference Design | TI.com
TIDA-00643: The TIDA-00643 reference design is a 4.4 to 30 V brushless DC motor controller for high power<a href="http://www.ti.com/solution/nonmilitary_drones">drones, quadcopter</a>, propeller, fan, and pump applications. It uses the Texas Instrument’s DRV8305 brushless DC motor gate driver, CSD17573Q5B 30V NexFET power MOSFETs, TPD4E05U06 TVS protection IC, C2000 motor control MCU, and LMR16006 3.3 V buck converter. It utilizes InstaSPINTM-FOC for sensorless field oriented motor control and commands the motor speed through an external reference signal from a central controller. This design is focused on demonstrating a highly efficient and high power BLDC motor system.
TIDA-00890 USB Type-A Plug to USB Type-C Receptacle SuperSpeed MUX With DFP Controller Reference Design | TI.com
TIDA-00890: The TIDA-00890 Dongle is designed to evaluate HD3SS3220 devices for DFP implementations. This reference design can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector. The layout files can be used as a guideline to implement the TUSB321A HD3SS3220 with illustrations of the routing/placement rules. The reference design includes on-board USB Type-A plug to connect to legacy USB systems. Please note that the design may include test components for evaluation purposes not applicable for production.
4.4 V to 30 V, 15 A, High Performance Brushless DC Drone Propeller Controller Reference Design
TIDA-00643: The TIDA-00643 reference design is a 4.4 to 30 V brushless DC motor controller for high power drone, quadcopter, propeller, fan, and pump applications. It uses the Texas Instrument’s DRV8305 brushless DC motor gate driver, CSD17573Q5B 30V NexFET power MOSFETs, TPD4E05U06 TVS protection IC, C2000 motor control MCU, and LMR16006 3.3 V buck converter. It utilizes InstaSPINTM-FOC for sensorless field oriented motor control and commands the motor speed through an external reference signal from a central controller. This design is focused on demonstrating a highly efficient and high power BLDC motor system.
TIDEP0078 OPC UA Data Access Server for AM572x Reference Design | TI.com
TIDEP0078: OPC UA is an industrial machine-to-machine protocol designed to allow interoperability and communication between all machines connected under Industry 4.0. The TIDEP0078 TI Design demonstrates use of the MatrikonOPC™ OPC UA server development kit (SDK) to allow communications using an OPC UA data access (DA) server running embedded in a project or design. The OPC UA DA deals with real-time data and is best suited for industrial automation applications where time is an important aspect of the data. A reference OPC UA server implementation is provided that accesses the GPIO capabilities of the AM572x IDK. The reference code can be extended to provide an OPC UA interface to any data the AM572x IDK board can access including data acquired through Profibus, RS-485, CAN bus, and industrial Ethernet-based protocols such as EtherCAT™ or PROFINET™ using the Programmable Real-time Unit Industrial Communication Subsystems (PRU-ICSS).
TIDA-00882 USB Type-C HDD With USB Power Delivery Reference Design | TI.com
TIDA-00882: This reference design uses Texas Instrument's SuperSpeed USB 3.0 to SATA bridge, USB Type-CTM and USB PD controller with integrated power switch and High-Speed USB mux, and SuperSpeed USB 3.1 mux to demonstrate the subsystems required to implement a Type-C external hard disk drive capable of delivering power to a Type-C host (laptop, tablet, phone, and more).
TI USB Type-C™ Dock Reference Design
TIDA-00630: The Type-C Dock Board is designed to help evaluate Type-C Dock implementations with video and charging support. The Type-C Dock offers data and video port expansion and a charging capability for Type-C systems that support USB PD/Alternate mode protocol. The dock comes with three downstream facing ports: two Type C DFP only ports with max of 5V@3A VBUS power, one Type-A DFP port with BC1.2 support. A DisplayPort connector is also provided for video sink connection: A direct connect to a DisplayPort monitor, connection to a MST HUB or a DP protocol converter to a monitor.
