参考设计
(22)
TIDM-SUB1GHZ-MESH-NETWORK Sub-1GHz Low Cost Mesh Network | TI.com
TIDM-SUB1GHZ-MESH-NETWORK: This solution implements a mesh network within Sub-1GHz frequency band. Using the MSP430G2533 MCU and CC1101 RF module, user can easily establish a self-organization network with multi-hops, low cost, and quick response. The ability to actively join and periodically data report makes this network suitable for many sensing network application fields.
CC1101-CC1190EM869RD CC1101-CC1190EM 869 MHz Reference Design | TI.com
CC1101-CC1190EM869RD: The CC1101-CC1190EM 869MHz reference design contains schematics and layout files for the CC1101-CC1190EM 869MHz evaluation module. The reference design demonstrates good techniques for CC1101-CC1190 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and an SMA antenna connector designed for a single ended 50 ohm antenna. The RF section has been designed and characterized for operation in the 869.4 - 869.65 MHz frequency sub-band (g3), but can also be used for other frequencies in the European 863 - 870 MHz band.
CC1101EM 868 and 915MHz Reference Design
CC1101EM868-915_REFDES: This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the 868 MHz and 915 MHz frequency bands.
CC1101 JTI Balun 868/915 MHz Reference Design
CC1101-JTIBALUN-RD: This is the reference design for CC1101 using a Johanson Technology (JTI) balun to significantly reduce component count whilst still obtaining high radio performance.
Sub-1GHz Low Cost Mesh Network
TIDM-SUB1GHZ-MESH-NETWORK: This solution implements a mesh network within Sub-1GHz frequency band. Using the MSP430G2533 MCU and CC1101 RF module, user can easily establish a self-organization network with multi-hops, low cost, and quick response. The ability to actively join and periodically data report makes this network suitable for many sensing network application fields.
Evaluation Module (EM) Adaptor
TIDM-LPBP-EMADAPTER: This BoosterPack kit contains one "EM Adapter BoosterPack". The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the vide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the appropriate code to interconnect the MCU with the RF device.
CC1101EM 315 and 433MHz Reference Design
CC1101EM433_REFDES: The CC1101EM reference design contains schematics and layout files for the CC1101EM module used in development kits. The reference design demonstrates good techniques for CC1101 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 2-layer reference design with a discrete balun and SMA antenna connector designed for a single ended 50 ohm antenna. The RF section is designed for operation in the 315 MHz and 433 MHz frequency bands.
TIDM-LPBP-EMADAPTER Evaluation Module (EM) Adaptor | TI.com
TIDM-LPBP-EMADAPTER: This BoosterPack kit contains one "EM Adapter BoosterPack". The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the vide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the appropriate code to interconnect the MCU with the RF device.
CC1101-CC1190EM 915 MHz Reference Design
CC1101-CC1190EM915RD: The CC1101-CC1190EM 915 MHz reference design contains schematics and layout files for the CC1101-CC1190EM 915 MHz evaluation module. The reference design demonstrates good techniques for CC1101-CC1190 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and an SMA antenna connector designed for a single ended 50 ohm antenna. The RF section has been designed and characterized for operation in the 902-928 MHz frequency band.
CC1101-CC1190EM915RD CC1101-CC1190EM 915 MHz Reference Design | TI.com
CC1101-CC1190EM915RD: The CC1101-CC1190EM 915 MHz reference design contains schematics and layout files for the CC1101-CC1190EM 915 MHz evaluation module. The reference design demonstrates good techniques for CC1101-CC1190 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and an SMA antenna connector designed for a single ended 50 ohm antenna. The RF section has been designed and characterized for operation in the 902-928 MHz frequency band.
CC1101-CC1190EM 869 MHz Reference Design
CC1101-CC1190EM869RD: The CC1101-CC1190EM 869MHz reference design contains schematics and layout files for the CC1101-CC1190EM 869MHz evaluation module. The reference design demonstrates good techniques for CC1101-CC1190 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and an SMA antenna connector designed for a single ended 50 ohm antenna. The RF section has been designed and characterized for operation in the 869.4 - 869.65 MHz frequency sub-band (g3), but can also be used for other frequencies in the European 863 - 870 MHz band.
CC1101EM433_REFDES CC1101EM 315 and 433MHz Reference Design | TI.com
CC1101EM433_REFDES: The CC1101EM reference design contains schematics and layout files for the CC1101EM module used in development kits. The reference design demonstrates good techniques for CC1101 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 2-layer reference design with a discrete balun and SMA antenna connector designed for a single ended 50 ohm antenna. The RF section is designed for operation in the 315 MHz and 433 MHz frequency bands.
