无法从文档中提取型号,请重试

Update your browser

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience for this site.

首页 > 电子元器件选型 > 电信电路 > 蜂窝电话电路

CC1101RGPR

加入BOM

CC1101RGPR
已加入BOM:

Texas Instruments

Low-power Sub-1 GHz wireless transceiver 20-QFN -40 to 85

市场均价:
¥38.585
市场总库存:
16,391
生命周期状态: Active
技术详情
价格 & 库存
替代料

参考设计

(22)
TIDM-SUB1GHZ-MESH-NETWORK Sub-1GHz Low Cost Mesh Network | TI.com
TIDM-SUB1GHZ-MESH-NETWORK: This solution implements a mesh network within Sub-1GHz frequency band. Using the MSP430G2533 MCU and CC1101 RF module, user can easily establish a self-organization network with multi-hops, low cost, and quick response. The ability to actively join and periodically data report makes this network suitable for many sensing network application fields.
Sub-1 GHz and 2.4 GHz Antenna Reference Designs
CC-ANTENNA-DK-RD: The Antenna Board reference design contains various low-cost antenna solutions for both sub-1 GHz and 2.4 GHz short range wireless systems.
CC1101-CC1190EM869RD CC1101-CC1190EM 869 MHz Reference Design | TI.com
CC1101-CC1190EM869RD: The CC1101-CC1190EM 869MHz reference design contains schematics and layout files for the CC1101-CC1190EM 869MHz evaluation module. The reference design demonstrates good techniques for CC1101-CC1190 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and an SMA antenna connector designed for a single ended 50 ohm antenna. The RF section has been designed and characterized for operation in the 869.4 - 869.65 MHz frequency sub-band (g3), but can also be used for other frequencies in the European 863 - 870 MHz band.
CC1101EM 868 and 915MHz Reference Design
CC1101EM868-915_REFDES: This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the 868 MHz and 915 MHz frequency bands.
CC1101 JTI Balun 868/915 MHz Reference Design
CC1101-JTIBALUN-RD: This is the reference design for CC1101 using a Johanson Technology (JTI) balun to significantly reduce component count whilst still obtaining high radio performance.
CC1110 IIFA Antenna 868/915 MHz Reference Design
CC1110IIFA-868-915-RD: CC1110 reference design with an inverted F antenna.
CC-ANTENNA-DK-RD Sub-1 GHz and 2.4 GHz Antenna Reference Designs | TI.com
CC-ANTENNA-DK-RD: The Antenna Board reference design contains various low-cost antenna solutions for both sub-1 GHz and 2.4 GHz short range wireless systems.
CC1101-JTIBALUN-RD CC1101 JTI Balun 868/915 MHz Reference Design | TI.com
CC1101-JTIBALUN-RD: This is the reference design for CC1101 using a Johanson Technology (JTI) balun to significantly reduce component count whilst still obtaining high radio performance.
Sub-1GHz Low Cost Mesh Network
TIDM-SUB1GHZ-MESH-NETWORK: This solution implements a mesh network within Sub-1GHz frequency band. Using the MSP430G2533 MCU and CC1101 RF module, user can easily establish a self-organization network with multi-hops, low cost, and quick response. The ability to actively join and periodically data report makes this network suitable for many sensing network application fields.
Evaluation Module (EM) Adaptor
TIDM-LPBP-EMADAPTER: This BoosterPack kit contains one "EM Adapter BoosterPack". The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the vide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the appropriate code to interconnect the MCU with the RF device.
CC1101EM 315 and 433MHz Reference Design
CC1101EM433_REFDES: The CC1101EM reference design contains schematics and layout files for the CC1101EM module used in development kits. The reference design demonstrates good techniques for CC1101 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 2-layer reference design with a discrete balun and SMA antenna connector designed for a single ended 50 ohm antenna. The RF section is designed for operation in the 315 MHz and 433 MHz frequency bands.
TIDM-LPBP-EMADAPTER Evaluation Module (EM) Adaptor | TI.com
TIDM-LPBP-EMADAPTER: This BoosterPack kit contains one "EM Adapter BoosterPack". The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the vide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the appropriate code to interconnect the MCU with the RF device.
CC1101EM868-915_REFDES CC1101EM 868 and 915MHz Reference Design | TI.com
CC1101EM868-915_REFDES: This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the 868 MHz and 915 MHz frequency bands.
CC1101-CC1190EM 915 MHz Reference Design
CC1101-CC1190EM915RD: The CC1101-CC1190EM 915 MHz reference design contains schematics and layout files for the CC1101-CC1190EM 915 MHz evaluation module. The reference design demonstrates good techniques for CC1101-CC1190 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and an SMA antenna connector designed for a single ended 50 ohm antenna. The RF section has been designed and characterized for operation in the 902-928 MHz frequency band.
CC1101-CC1190EM915RD CC1101-CC1190EM 915 MHz Reference Design | TI.com
CC1101-CC1190EM915RD: The CC1101-CC1190EM 915 MHz reference design contains schematics and layout files for the CC1101-CC1190EM 915 MHz evaluation module. The reference design demonstrates good techniques for CC1101-CC1190 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and an SMA antenna connector designed for a single ended 50 ohm antenna. The RF section has been designed and characterized for operation in the 902-928 MHz frequency band.
CC1110IIFA-868-915-RD CC1110 IIFA Antenna 868/915 MHz Reference Design | TI.com
CC1110IIFA-868-915-RD: CC1110 reference design with an inverted F antenna.
CC1101-CC1190EM 869 MHz Reference Design
CC1101-CC1190EM869RD: The CC1101-CC1190EM 869MHz reference design contains schematics and layout files for the CC1101-CC1190EM 869MHz evaluation module. The reference design demonstrates good techniques for CC1101-CC1190 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and an SMA antenna connector designed for a single ended 50 ohm antenna. The RF section has been designed and characterized for operation in the 869.4 - 869.65 MHz frequency sub-band (g3), but can also be used for other frequencies in the European 863 - 870 MHz band.
CC1101EM433_REFDES CC1101EM 315 and 433MHz Reference Design | TI.com
CC1101EM433_REFDES: The CC1101EM reference design contains schematics and layout files for the CC1101EM module used in development kits. The reference design demonstrates good techniques for CC1101 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 2-layer reference design with a discrete balun and SMA antenna connector designed for a single ended 50 ohm antenna. The RF section is designed for operation in the 315 MHz and 433 MHz frequency bands.
显示更多价格 & 库存吗?

价格走势

库存走势

显示更多替代料吗?
新建BOM