参考设计
(16)
CC2530TDKBALUN-RD TDK Corporation balun optimized for CC253x | TI.com
CC2530TDKBALUN-RD: The CC2530EM reference design contains schematics and layout files for the CC2530 and contains one part from TDK Corporation interfacing the antenna (documented in AN104). The TDK Corporation part realizes the balun-, filter- an impedance matching-function and is custom made to be operated with CC253x. CC254x and the CC85xx PurePath wireless family. The reference design demonstrates good techniques for CC2530 decoupling and RF layout. For optimum RF performance, the reference design should be copied accurately. This is a 2-layer reference design with a SMA antenna connector allowing operation with single ended 50 ohm antenna for easy connection to instruments for measurements.
CC2540KEYFOB-RD CC2540 Keyfob Reference Design | TI.com
CC2540KEYFOB-RD: The CC2540 keyfob reference design is included in the CC2540DK-MINI development kit. Components in this design controlled by the CC2540 include a three axis accelerometer, buzzer (for alarm sounds), two color LED and two buttons. The design is used as a remote control in the CC2540 RC demo. The reference design demonstrates good techniques for CC2540 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and a compact meandered inverted F PCB antenna. This antenna is the recommended small PCB antenna for the 2.4 GHz frequency band.
Standalone 2.4GHz Range Extender Reference Design
CC2592EMK-RD: This standalone 2.4 GHz range extender reference design provides all the information needed to use the SimpleLink™ CC2592 range extender (PA/LNA front end) with any 2.4 GHz RF radio in a wide range of applications, including sensor mesh networks and gateways. The CC2592 range extender contains PA, LNA, switches, balun, and RF matching, working together to increase the power output and improve receiver sensitivity for a 2.4 GHz low-power RF radio.
CC2540EM Reference Design
CC2540EM-RD: The CC2540EM reference design contains schematics and layout files for the CC2540EM module. The reference design demonstrates good techniques for CC2540 decoupling and RF layout. For optimum RF performance, the reference design should be copied accurately. This is a 4-layer reference design with an SMA antenna connector for RF output matched to 50 ohm.
CC2540 Keyfob Reference Design
CC2540KEYFOB-RD: The CC2540 keyfob reference design is included in the CC2540DK-MINI development kit. Components in this design controlled by the CC2540 include a three axis accelerometer, buzzer (for alarm sounds), two color LED and two buttons. The design is used as a remote control in the CC2540 RC demo. The reference design demonstrates good techniques for CC2540 decoupling and RF layout. For optimum RF performance, these parts should be copied accurately. This is a 4-layer reference design with a discrete balun and a compact meandered inverted F PCB antenna. This antenna is the recommended small PCB antenna for the 2.4 GHz frequency band.
CC2592EMK-RD Standalone 2.4GHz Range Extender Reference Design | TI.com
CC2592EMK-RD: This standalone 2.4 GHz range extender reference design provides all the information needed to use the SimpleLink™ CC2592 range extender (PA/LNA front end) with any 2.4 GHz RF radio in a wide range of applications, including sensor mesh networks and gateways. The CC2592 range extender contains PA, LNA, switches, balun, and RF matching, working together to increase the power output and improve receiver sensitivity for a 2.4 GHz low-power RF radio.
CC2540EM-RD CC2540EM Reference Design | TI.com
CC2540EM-RD: The CC2540EM reference design contains schematics and layout files for the CC2540EM module. The reference design demonstrates good techniques for CC2540 decoupling and RF layout. For optimum RF performance, the reference design should be copied accurately. This is a 4-layer reference design with an SMA antenna connector for RF output matched to 50 ohm.
TDK Corporation balun optimized for CC253x
CC2530TDKBALUN-RD: The CC2530EM reference design contains schematics and layout files for the CC2530 and contains one part from TDK Corporation interfacing the antenna (documented in AN104). The TDK Corporation part realizes the balun-, filter- an impedance matching-function and is custom made to be operated with CC253x. CC254x and the CC85xx PurePath wireless family. The reference design demonstrates good techniques for CC2530 decoupling and RF layout. For optimum RF performance, the reference design should be copied accurately. This is a 2-layer reference design with a SMA antenna connector allowing operation with single ended 50 ohm antenna for easy connection to instruments for measurements.
CC2540 Bluetooth Low Energy USB Dongle Reference Design
TIDC-CC2540-BLE-USB: The CC2540 USB Dongle is a complete example of how to use the USB enabled Bluetooth Low Energy (BLE) Wireless MCU. The reference design can be used to enable Bluetooth Smart and Internet of Things applications on any system that contains a USB host.
CC2540TPS62730EM-RD CC2540 and TPS62730 Evaluation Module Reference Design | TI.com
CC2540TPS62730EM-RD: The CC2540EM DCDC VDD reference design contains schematics and layout files for the CC2540EM DCDC VDD module. The reference design demonstrates good techniques for CC2540 decoupling and RF layout. For optimum RF performance, the reference design should be copied accurately. This is a 4-layer reference design with an SMA antenna connector for RF output matched to 50 ohm. Along with that, it shows the proper way to supply the CC2540 with the TPS62730 DC/DC converter for current savings of up to 30% in active mode. The TPS62730 converter is controlled by the CC2540.
CC2540 and TPS62730 Evaluation Module Reference Design
CC2540TPS62730EM-RD: The CC2540EM DCDC VDD reference design contains schematics and layout files for the CC2540EM DCDC VDD module. The reference design demonstrates good techniques for CC2540 decoupling and RF layout. For optimum RF performance, the reference design should be copied accurately. This is a 4-layer reference design with an SMA antenna connector for RF output matched to 50 ohm. Along with that, it shows the proper way to supply the CC2540 with the TPS62730 DC/DC converter for current savings of up to 30% in active mode. The TPS62730 converter is controlled by the CC2540.
