MPZ2012S601A中文资料_PDF数据手册

MPZ2012S601A

加入BOM

TDK

Ferrite Chip, 1 Function(s), 2A, ROHS COMPLIANT, SMD, 2 PIN

技术详情

价格 & 库存

详细参数

不含铅

符合

Active

compliant

EAR99

8504.50.80.00

0.7

0805

Chip Bead

0.1 Ω

FERRITE CHIP

100 MHz

0.85 mm

2 mm

SURFACE MOUNT

125 °C

-55 °C

600 OHM Ω

TAPE AND REEL

2 A

TIN OVER NICKEL

1.25 mm

文档下载

MPZ2012S601A TDK Corporation of America 也适用于 MPZ ,MPZ2012S221AT ,MPZ2012S221A 等其余

参考设计

(8)

Two-output Buck and LDO for Consumer Applications (12V @ 250mA)

PMP5548.2: The PMP5548 is a buck converter with a secondary winding coupled with the main inductor. This winding supplies 6V that are added to the 6V output thus generating 12V. A 3.3V further output is derived from the main 6V output by means of an LDO.

PoE 12@0.9, 3.3@1.5A, 1.8@0.8A, 1.2@0.8A

PMP4648: This PMP4648 is a multi-output power supply in a Power over Ethernet application. A 12V adapter input is connected in OR-ing to the 12V output.

BeagleBone Cape for Programmable Logic Controller Reference Design

TIDA-00312: The BeagleBone Black (BBB) Cape for the PLC I/O module is a platform for evaluation of the PLC I/O reference designs (ex. TIDA-00236). The platform showcases TI’s system solution that can be used in a PLC signal chain and allows evaluation of the signal chain performance. The cape connects the PLC I/O reference design daughter card (ex. TIDA-00236) to the BBB board. The BBB board runs the evaluation software for the I/O card and a webserver, allowing the user to view the performance from a PC. The highlight of this design is the simple hardware and minimal software installation requirements on the PC for evaluation. TI’s PLC I/O module reference designs have complete signal chain for the PLC I/O modules. Evaluating the signal chain requires examination of the critical performance parameters of the hardware. Data collection, processing, and display are the typical functions required for evaluation. The easy-to-use GUI accelerates the performance of the I/O module evaluation process and reduces time to market.

Universal AC Input 7.5W Adapter Reference Design

PMP4391: This 5V / 1.5A adapter solution is fully tested and passes EMI and EMC (CE,RE) safety requirements. It implements a low cost primary side Bipolar controller UCC28722. The efficiency of the design is 78% with standby power less than 100mW. The design is very slim; the size is 30mmX35.3mmX8mm and has been thermally characterized.

Universal AC Input, 12Vout 0.5A Power Supply with Low Standby Power Reference Design

PMP4447: The PMP4447 is a power reference design with a universal AC input and a DC isolated output of 12V at 0.5A. It implements a high efficiency primary side controller UCC28910 which has an integrated 700V high voltage MOSFET. Additionally this reference design was characterized with the high efficiency DC/DC converter TPS5405 to generate a 5V output. The full system achieves <100mW in standby mode. The board measures 36mmX30mmX15mm. The PMP4447 is fully tested and passes EMC (CE) requirements.

Class 3- Isolated Flyback (15V@0.72A) for PoE Applications

PMP5270: Low-Cost Isolated Non-synchronous flyback converter with 15V at 0.72A output for class 3 POE Applications. PMP5270 accepts input voltages between 36-57Vac. This design uses TPS23753A IEEE 802.3-2005 PoE PD and PWM controller.

Universal AC Input 6W Adapter with Energy Star 6 Efficiency Rating

PMP4367: This 5V / 1.2A adapter solution is fully test and passes EMI and EMC (CE,RE) safety requirements. It implements a high efficiency primary side controller UCC28910. The efficiency of the design complies with Energy Star 6 and is designed to fit into small form factor housing. The design measures 36mmX30mmX15mm and has been thermally characterized. No load efficiency is <30mW over the entire operating range. EE16 transformer of low cost is used.

Flybuck Triple Output with Buck regulator and LDO, 24 - 42V input

PMP5548.1: The PMP5548 is a buck converter with a secondary winding coupled with the main inductor. This winding supplies 6V that are added to the 6V output thus generating 12V. A 3.3V further output is derived from the main 6V output by means of an LDO.

< / 共 8 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

MPZ2012S601A

详细参数

文档下载

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

MPZ2012S601A

详细参数

文档下载

参考设计

价格走势

库存走势

完善邮箱信息

站内导航

友情链接

联系我们

美国总部

苏州总部