无法从文档中提取型号,请重试

Update your browser

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience for this site.

首页 > 电子元器件选型 > 电源电路 > 开关式稳压器或控制器

TPS53515RVER

加入BOM

TPS53515RVER
已加入BOM:

Texas Instruments

1.5-V to 18-V, 12-A synchronous SWIFT™ buck converter 28-VQFN-CLIP -40 to 85

市场均价:
-
市场总库存:
-
生命周期状态: Active
技术详情
替代料

参考设计

(11)
PMP20026 TPS53515 Low Power DDR Memory Power Supply Reference Design | TI.com
PMP20026: The PMP20026 reference design provides an efficient low power solution for DDR4 memory. The power supply is powered from a 12V source and regulates the output to 1.2V at up to 6A. The TPS53515 operates in a single phase buck mode at 500kHz that allows for very high efficiency conversion. The solution size is25mm x 15mm. The peak effciency approaches 90% at 5A. At very light loads the efficiency is still above 40%.
PMP11438 Three Different Buck Converter Circuits to Convert 12V to 1.2V at >6A Load Current Reference Design | TI.com
PMP11438: PMP11438 is a vehicle used to compare three different power solutions for converting a 12V bus to 1.2V at 6-10A. The 1.2V output voltage is applicable to DDR4 memory applications. Each solution offers an advantage in either full load efficiency, light load efficiency, density, height, transient response, or some combination of these.
High Power Density 12Vin, 11.8W Buck Converter with Inductor On Top of the IC
TIDA-00595: The TPS53515 Inductor-On-Top Step-Down Buck Converter reference design enables reduction of X-Y area while enabling >87% efficiency with 2.6W of power loss @12A load and 12mV of output voltage ripple with only 10x22uF ceramic output caps. This power reference design supports a 12V input and a 1.2V output at 12A and switches at 1MHz.
PMP11399 PMBus Power System for Enterprise Ethernet Switches Reference Design | TI.com
PMP11399: PMP11399 is a complete PMBus power system for 3 ASIC/FPGA cores, DDR3 core memory, VTT termination, and auxiliary voltages commonly found on high-performance Ethernet Switches. The hardware is accompanied by a GUI that allows the user to perform real-time configuration and monitoring of the power supplies.
PMP9146 Communication ASIC Core Power Supply Reference Design | TI.com
PMP9146: The PMP9146 utilizes the TPS53515 DCAP3-mode SWIFT stepdown DC-DC converter to power high-current ASIC core rails at 1.2Vout/12A, with only 247mm2 of total power supply area and 27 total components.
TIDA-00595 High Power Density 12Vin, 11.8W Buck Converter with Inductor On Top of the IC | TI.com
TIDA-00595: The TPS53515 Inductor-On-Top Step-Down Buck Converter reference design enables reduction of X-Y area while enabling >87% efficiency with 2.6W of power loss @12A load and 12mV of output voltage ripple with only 10x22uF ceramic output caps. This power reference design supports a 12V input and a 1.2V output at 12A and switches at 1MHz.
Complete PMBus Power System for Enterprise Ethernet Switches Reference Design
PMP10896: Complete PMBus power system for 3 ASIC/FPGA cores, DDR3 core memory, and auxiliary voltages found on high-performance Ethernet Switches.
PMP9475 Xilinx Virtex UltraScale FPGA Power Solution with PMBus Reference Design | TI.com
PMP9475: The PMP9475 12V-input reference design provides all the power supply rails necessary to power Xilinx's Virtex® UltraScale™ family of FPGAs in a compact, highly efficient design. This design uses several of TI's PMBus Point-Of-Load voltage regulators for ease of design/configuration and telemetry of critical rails. It features a UCD90120A for flexible power up and power down sequencing as well as voltage monitoring, current monitoring, and voltage margining through the PMBus interface.
Communication ASIC Core Power Supply Reference Design
PMP9146: The PMP9146 utilizes the TPS53515 DCAP3-mode SWIFT stepdown DC-DC converter to power high-current ASIC core rails at 1.2Vout/12A, with only 247mm2 of total power supply area and 27 total components.
PMP10896 Complete PMBus Power System for Enterprise Ethernet Switches Reference Design | TI.com
PMP10896: Complete PMBus power system for 3 ASIC/FPGA cores, DDR3 core memory, and auxiliary voltages found on high-performance Ethernet Switches.
Xilinx Virtex UltraScale FPGA Power Solution with PMBus Reference Design
PMP9475: The PMP9475 12V-input reference design provides all the power supply rails necessary to power Xilinx's Virtex® UltraScale™ family of FPGAs in a compact, highly efficient design. This design uses several of TI's PMBus Point-Of-Load voltage regulators for ease of design/configuration and telemetry of critical rails. It features a UCD90120A for flexible power up and power down sequencing as well as voltage monitoring, current monitoring, and voltage margining through the PMBus interface.
新建BOM