WSL20103L000FEA中文资料_PDF数据手册

WSL20103L000FEA

加入BOM

Vishay

RESISTOR, CURRENT SENSE, METAL STRIP, 0.5 W, 1 %, 150 ppm, 0.003 ohm, SURFACE MOUNT, 2010, CHIP, GREEN

技术详情

价格 & 库存

详细参数

不含铅

符合

Active

SMT, 2010

compliant

EAR99

8533.21.00.30

1850

ANTI-SULFUR

Rectangular

SURFACE MOUNT

170 °C

-65 °C

0.635 mm

5.08 mm

RECTANGULAR PACKAGE

SMT

2.54 mm

0.5 W

70 °C

AEC-Q200

0.003 Ω

FIXED RESISTOR

2010

YES

METAL STRIP

150 ppm/°C

MATTE TIN OVER NICKEL

WRAPAROUND

0.0387 V

文档下载

WSL20103L000FEA Vishay Dale 也适用于 WSL2010R4700FEA ,WSL20106L000FTA ,WSL2512R2000FBA 等其余

参考设计

(15)

Dual Phase Synchronous Buck

PMP7884: This is a dual-phase, synchronous buck converter with an input voltage range of 30.6V-to-37.4Vin and an output of 9Vout @ 15A.

Reference Design for Telecom Applications (.9V @ .5A)

12V/400W Dual-Phase 1/4 Brick Buck Converter Reference Design Delivers 97% Peak Efficiency

PMP7819: This 400W ¼ brick DC/DC converter leverages the LM5119’s dual-phase capability to drive a 33A load in an industry-standard ¼ brick module footprint. This compact design delivers 97% peak efficiency while maintaining balanced current through each phase, which reduces thermal stress and enables lower system cost by eliminating the need to over-design the surrounding power components.

Reference Design for Telecom Applications (1.05V @ 7A) - PMP4742.5 - TI Tool Folder

PMP4742: For PMP4742.5, the core voltage is supplied by TPS40021, which drives CSD16406 and CSD16409 to deliver 1.05V@7A. The TPS2420 on the 5Vin limits the inrush current "seen" by the 5V source.

Dual Phase Synchronous Buck (30Vout@10A)

PMP7885: This is a dual-phase, synchronous buck converter with an input voltage range of 30.6V-to-37.4Vin and providing an output of 30Vout @ 10A.

Reference Design for Telecom Applications (1.8V @ 4A) - PMP4742.6 - TI Tool Folder

PMP4742: PMP4742.6 supplies the DDR2 memory by means of TPS54620 (1.8V@3.5A) and TPS51200 (0.9V@0.5A). The DDR2 current is monitored by INA210 and shunt resistor.

Reference Design for Telecom Applications (12V @ 1.1A) - PMP4742.1 - TI Tool Folder

PMP4742: PMP4742.1 comprises a negative input (-10.8V to -13.2V) to positive output (12V@1A average) inverting buck-boost converter with TPS40210; a hot swap circuit with TPS2420 quickly limits the output current to 2A peak.

Reference Design - High Efficiency Two-Phase Synchronous Buck Delivers 300W

PMP9700: This two-phase synchronous buck operates from 24VDC and supplies an output of 15V@20A. Operation at 300KHz (per phase) delivers small size and greater than 96% efficiency.

Reference Design for Telecom Applications (24V @ 0.5A)

PMP4742.2: PMP4742.2 is a simple and efficient non synchronous boost converter. It boosts the input 12V to 24V at 150mA nominal, 500mA maximum. Its enable pin is driven by power good signal from the hot swap TPS2420.

33Vin to 60Vin; 12Vout @ 30A; Dual-Phase Synchronous Buck Converter

PMP7990: A dual-phase synchronous buck converter accepting an input voltage of 33Vin to 60Vin and providing an output of 12Vout capable of supplying 30A

Reference Design for Telecom Applications (1.8V @ 4A)

PMP4742.6: PMP4742.6 supplies the DDR2 memory by means of TPS54620 (1.8V@3.5A) and TPS51200 (0.9V@0.5A). The DDR2 current is monitored by INA210 and shunt resistor.

Reference Design for Telecom Applications (12V @ 1.1A)

PMP4742.1: PMP4742.1 comprises a negative input (-10.8V to -13.2V) to positive output (12V@1A average) inverting buck-boost converter with TPS40210; a hot swap circuit with TPS2420 quickly limits the output current to 2A peak.

Reference Design for Telecom Applications (1.2V @ 2A)

PMP4742.4: For PMP4742.4, A second TPS54620 synchronous buck converter, supplies an FPGA at 1.2V@2A. Also, the output current is measured by INA210 and shunt resistor.

Reference Design for Telecom Applications (3.3V @ 5A)

PMP4742.3: PMP4742.3 protects the 12Vin by means of hot swap controller (TPS2420) and feeds a TPS54620, syncronous buck converter, which generates 3.3V@3.7A. An INA210 reads the buck's current for monitoring purposes.

Reference Design for Telecom Applications (1.05V @ 7A)

PMP4742.5: For PMP4742.5, the core voltage is supplied by TPS40021, which drives CSD16406 and CSD16409 to deliver 1.05V@7A. The TPS2420 on the 5Vin limits the inrush current "seen" by the 5V source.

< / 共 15 个参考设计 >

显示更多价格 & 库存吗?

苏公网安备 32059002001042号

联系我们

美国总部

61 South Fair Oaks Avenue, Suite 200

Pasadena, CA 91105, USA

苏州总部

苏州工业园区月亮湾路 15 号中新大厦 4406-4411

江苏省苏州市, 215021

邮箱：service@bom2buy.com

电话：(0512) 62988549

WSL20103L000FEA

详细参数

文档下载

参考设计

价格走势

库存走势

站内导航

友情链接

联系我们

美国总部

苏州总部

创建 BOM

确认BOM数据

上传失败

正在上传

登录

WSL20103L000FEA

详细参数

文档下载

参考设计

价格走势

库存走势

完善邮箱信息

站内导航

友情链接

联系我们

美国总部

苏州总部